(506) 2240-6804
3D printer cafe
MakersCAFE - A New 3D Printing Cafe in London
What do you get when you combine 3D printing, laser cutting, comfy seating, good coffee and cold beer? Well, you get a very curious Average Man for a start.
Let’s rewind back a week. A colleague of mine shows me an article in TimeOut magazine about a new place called MakersCAFE opening just 15 minutes from our office. He tells me “you can get stuff 3D printed there” – knowing full well that this would excite me and ruin my concentration for the rest of the day. You see there’s a strong link between the Raspberry Pi and ‘making’, especially with 3D printing as there are so many designs for cases out there.
A quick search online confirms the article – MakersCAFE was a reality and offered everything I had been looking for in recent months. A way to get 3D printing done without spending thousands on machines, software and lessons!
No less than ten minutes later I had emailed the chaps MakersCAFE asking for a bit of a tour/interview to share on my blog. Founder Soner Ozenc invited me to join them for the afternoon, and even agreed to help me create my first 3D printed item – a Raspberry Pi case!
Read on to hear more about my new favourite London hangout…
Crossing Borders
It was a Friday afternoon that I had scheduled to meet the guys at MakersCAFE. With my office just down the road, I decided to use my (slightly extended) lunch hour to learn all about the coolest new coffee shop in town.
The walk from Liverpool Street to Shoreditch is an interesting one – almost like crossing a border. In the space of a few minutes you transition from the concrete coldness of the city, to the warm, trendy and laid back cooltopia that is Shoreditch.
On a busy crossing half way up Shoreditch High Street, I finally arrived at MakersCAFE.
The 3D printer in the window draws makers in like a magnet
Warm Welcome
Being a bit unsure what to expect, I had a quick glance through the window before entering.
A fancy bit of kit got most of my attention, which I assumed was one of the 3D printers (I would later print my own Raspberry Pi case on this).
MakersCAFE have an Ultimaker2 in the cafe window
Behind this was what I would stereotype as a crowd of ‘design people’, purely because they were wearing much more fashionable clothes than me and looked like they knew what they were doing…some would call this jealousy.
I poked my nose into the door to an instant warm welcome by Cris, the 3D printing expert at MakersCAFE. He quickly invited me to the rear of the store where he had already been reviewing the 3D design I had emailed over earlier than morning.
My design was already on Cris’ laptop when I arrived. Spot on.
Cris and the gang wanted to get my project created as soon as possible for me, all part of the MakersCAFE ethos (I’ll cover more on this later). They explained the job and my options to me in a familiar ‘Average Man’ fashion – assuming no prior knowledge and at a level that anyone could understand, which I found really refreshing.
I handed over some crisp paper money and then proceeded to sit down with MakersCAFE’s founder, Soner Ozenc, whilst Cris and the team prepared my item for print.
3D Founder
With the big media players such as BBC News, TimeOut magazine and the Evening Standard all recently reporting on the cafe, I was grateful that the founder made some time for a feature on my ‘Average’ blog, especially considering they’ve only been open a couple of weeks.
Soner introduced himself and led me to the middle section of the shop which is kind of a mix between a coffee shop and somewhere to work on thoughts, designs and makes. It has a laid back calm atmosphere with that warm whiff of coffee beans which felt like the perfect place to meet with fellow makers.
The middle room is a comfy place to work on projects
I came armed with a list of questions eager to find out more about Soner, MakersCAFE and 3D printing in general.
Soner’s story has no odd twists or turns, in fact, you can really see how his history led to him to found MakersCAFE.
Originally a product designer – Soner set up a product design studio soon after graduation. This history is embedded into the MakersCAFE via the lampshades and mirrors around the shop which he designed and manufactured himself:
Soner’s CMKYshade
Soner has his mirror design collection in the store too
With the experience from this, in 2006 he set up laser-cutting firm RazorLab, the UK hub for Ponoko which prides itself on being “The World’s Easiest Making System”. This regional ‘hub’ setup cuts fees, postage costs and most importantly – time. This ethos is clearly a big part of MakersCAFE as well.
The next project was MakersCAFE. Around 2 years ago Soner purchased MakersCAFE.com with the intention of eventually creating a place for makers to gather, discuss, learn, share and make (and clearly he did!).
Soners impressive record as a mechanical engineer, product designer, web developer and now Barista make him the perfect kind of person to start something like this.
International Maker
One thing that was clear from our discussion is that Soner isn’t the kind of guy to sit still.
With the Shoreditch location being the proof of concept for MakersCAFE, we discussed what was next for the brand. Soner explained that he plans to create new branches in New York and Sydney. Following this, franchising out to the rest of the world would be the next step. No stopping this guy!
All Things ‘Make’
Naturally I was keen to bring up the Raspberry Pi and we soon got talking about the link between MakersCAFE and the popular micro-computer.
Soner explained how the MakersCAFE is for ‘anything to do with making” and not just getting 3D printing/laser cutting work done. He talked about how some people simply just come, grab a coffee and ‘3D print watch’ – I guess it’s a bit like bird watching for the modern age. The MakersCAFE welcomes all forms of maker to meet, collaborate, share ideas, prototype and get a good brew at the same time – with no obligation to do any printing/cutting.
An interesting wall defining ‘Making’
Workshop & Events
Our discussion about different maker types soon moved to one of the other sides of MakersCAFE – events.
The room we were sitting in (middle room) turns into a workshop/event venue after 6pm, with regular talks, workshops and even parties. Soner sees it almost as a social responsibility that the cafe educate and share knowledge on making as much as possible. He asked me if there was perhaps something I could do on the Raspberry Pi – something that’s had me thinking ever since I got back from the cafe. Watch this space…
The Cafe
So what exactly can you get made at MakersCAFE?
The one we already know about is 3D printing. The cafe has a number of 3D printers dotted around the building, an even one in the main window.
The main counter with a collection of machines
Just behind a couple of these 3D printers was a food-based printing machine.
A 3D print style machine that can make real, edible food. Yes really! During my chat with Soner he mentioned that he wanted to change the perception of manufacturing from the cold/dirty/smelly factory scene, to somewhere warm and inviting where you can order a pop-up dinner to be 3D printed right in front of you.
A 3D food printer. I’ve seen it all now…cutting edge stuff!
Within the main counter itself is a laser cutter. Soner explained that jobs of pretty much any size can be catered for, however larger stuff goes to a top secret location to be completed.
An interesting looking project being cut at MakersCAFE
A Little Help From My Friends
The whole time I was there, I couldn’t help but feel somewhat inadequate. Being 100% average, I have no software or skills to design anything that could be made on these fascinating machines. But this is the great thing about MakersCAFE and the 3D printing scene – you don’t need to have the software or skills.
I was tempted to ask ‘owl’ much this would cost…
With Soner’s team of experts, the cafe offers an optional consultancy service to help you with your design. People like Cris (the 3D printing top boy) for example, could help you tweak your design, offer advice and provide technical knowledge and experience that will more than likely save you money in the long run. They even mentioned that they want to get to a point where you could come in with an object and simply ask for one of the team to design it in the 3D software for you.
Obviously this comes at a price, and at MakersCAFE it’s a simple and clear £1 per minute.
Free Designs
Another way of getting around this pure lack of talent is Thingiverse. You what? Yes ‘Thingiverse’ – it’s a website where ‘makers’ log in and share their designs with the rest of the world, and i’m pretty sure 99% of them are free to download and use, and even modify if you have the necessary software.
Find all sorts of good stuff at Thingiverse!
At first you might wonder why you would want someone else’s design that they made for their own tastes and needs, however there are simply thousands of designs on there to be picked up and printed.
In relevance to this blog, a quick search for “Raspberry Pi” brings up a huge list of innovative case designs.
For this article I was desperate to see something being printed and also really wanted to have a souvenier to take away, so I downloaded this Raspberry Pi Exoskeleton case design from Thingiverse made by a chap called Jose Torre.
The two separate parts to make up my Raspberry Pi case
Cris and the team were already setting up my case to be made whilst I was having a chat with Soner, so the next part of my tour was to watch my case being made.
Pi Print
Cris is the in house 3D expert at MakersCAFE, so he walked me through the process of how we would turn my design file into a 3D printed object.
I got the impression that Cris is one of the very small percentage of people who genuinely loves going to work – he has a permanent smile when talking about anything to do with 3D printing. I was filled with jealousy the whole time I was there, mindful that I had to soon return to my soulless city office.
After loading my file into the machine (an Ultimaker II), the base plate is put in place with a sort of adhesive on it that helps the initial layers stay in place during the printing process. Cris then started the machine and set it to make my design:
Cris setting up the print – note the Pebble watch
After a few minutes waiting for the machine to warm up, the Ultimaker kicked into action and started with a test ‘blob’ and then continued to outline my case:
I was amazed at how thin and yet accurate the material was laid down
My case was being made at the ‘Rapid’ 210 micron quality setting, which is the fastest and cheapest option that MakersCAFE offer. Cris explained the different options, and why you might want to pay more for a lower micron level for a smoother end product. It all depends on what you’re making, your budget, and kind of the object’s application in the real world.
It wasn’t too long before the machine had made progress on my case, and I could see the end result generating right before my eyes.
Despite opting for the rapid setting, it would still be a few hours before the case would be finished. There is no obligation to be present when getting something printed, so I took a few more pictures and then headed back to work.
I can see why some people just watch 3D printers – fascinating!
Here’s a video of it being printed:
When in Rome
Work finished at around 5pm. The cafe is open until 6, so I took a casual stroll back through Shoreditch to collect my finished item.
I arrived to find Cris still seemingly loving every second of his employment, helping a few guys with their key holding design prototype. Maybe his easy access to good strong coffee helps with his enthusiasm?
Cris handed me my finished case and invited me to take a seat to look at it, work on my blog or whatever else I might want to do.
I really love the casual nature of this place!
My finished case – looks great even with the high micron setting
Now, let’s take a look at my scenario. It’s Friday night, in London, with the wife not expecting me home any time soon. Add to this equation the fact that MakersCAFE have an alcohol license, and I’m looking to celebrate my 3D success…and you can quickly see where I’m going here…
…time for a pint!
3D printing and beer – that’s all my boxes ticked
I stayed for a beer, and kicked back watching the various groups of people working away at their designs and prototypes. I decided it was a good time to have another look at Thingiverse on my phone for the next ‘thing’ I would get made here.
A few of the MakersCAFE team came over for a chat, answering a few last questions that I had before I finally packed up and left for home.
When I arrived back at Average Towers, I quickly grabbed one of my Raspberry Pis and the M3x30 bolts that I had ordered in for the case (as instructed by the Thingiverse description) and put it all together.
Here is the end result:
The Pi fits great in this case and is a really unique design
Summary
I had a great afternoon at MakersCAFE and I really can’t wait to get back there for another fun-filled printing session.
If you think 3D printing is one of those inaccessible expensive things that the average man can’t get involved in – think again. With sites like Thingiverse offering thousands of free designs, and MakersCAFE entertaining any kind of project big or small – there’s really no reason to fear this great new technology. Even just rocking up for a coffee and to watch other people ‘making’ is a great way to learn more.
People enjoying a decent brew at MakersCAFE
MakersCAFE offers an inviting and inspiring space for makers of all types to come together, collaborate, share knowledge, make and get a decent drink at the same time. I’m pretty sure MakersCAFE caters for pretty much any and every hobby out there – so get yourself down there and go make!
You can find MakersCAFE at www.
makerscafe.com – but I’d definitely recommend popping down in ‘3D’ for a coffee at:
MakersCAFE
Old Shoreditch Station
1 Kingsland Road
London
E2 8DA
See you there!
Average Man
Cafe best STL files for 3D printing・Cults
Cafe Racer
Free
Coffee V2 Lamp
€3
Coffee lamp
€3
Coffee V2 Lamp
€3
Coffee lamp
€3
Tamp Stand for Breville Café Roma Espresso Machine ESP8XL
Free
Crazy cup, Crazy cup.
€1
Snorlax Mug
€16.24
Mom with cup Mom with cup
€1.
04
Coffe Adictive
€1.99
Honda Hornet 600 (Pc34) Lamp Mask Gitter
Free
HALLOWEEN PUMPKIN MUG
€0.65
Coffee Cup Keychain
€1.50 -15% €1.28
Shelf for tamper
€0.50
electric coffee dispenser
€3
Metering ring for portafilter
€0.50
Two espresso coffees with a single Dolce Gusto capsule
€5
Mag Cap
Free
Keychain cup - Coffee cup Keychain
€1.
23
Senseo coffee boxes
Free
Halloween Mug Cookie Cutter
Free
FLORK KEY RINGS PACK OF 14 KEY RINGS
€1.30
Parametric Wall O
€8.50
Cafe Cup
Free
Coffee V2 Lamp
€3
Coffee lamp
€3
Nespresso Support
Free
Topper Flork Loc@
€0.50
Mother and Child Flork Topper
€1
Topper flork drinking coffee
€1
cookie carton jar
€1.
57
COFFEE - LED LAMP (NAMELED)
€5
Coffee Machine: Coffee Strength And Quantity Regulator
€1
Funko Pop The Office Gift for Office, Dad, Spouse
€4.17
WALL DECORATION CAFE - COFFEE
€2
"Kitchen" Wall Sculpture
€1.50
Husqvarna mirror plugs M10
€1.30
Coffee Drip Tray
€2.88
MEASURING SPOON
€0.97
BMW K75 K100 air filter hole cover
€2
Distributeur souples dosettes café Senseo / Senseo coffee pad distributor
€5
CLASSIC VINTAGE SIGNS/PLAQUES - CAFE - ROADHOUSE - SIGN -PLAQUE - WALL DECORATION
Free
Multipurpose coffee cup
€2.
05
Pot
Free
Kettle
Free
Autumn Coffee Cup Polymer Clay Cutter | Digital STL File | 4 Sizes | 2 Cutter Versions
€2.90
Robert Cafeteros Doubles
€2.50
COW RESERVED TABLE
€1.03
“In Moscow, you can already try squid made on a 3D printer” – The City, 07/14/2021
In “The City. We're talking," restaurateur Dmitry Levitsky spoke about the food of the future, why robots are replacing waiters, and where Russian cuisine has disappeared (not to be confused with Soviet cuisine).
Food from a 3D printer
The technology of printing food on a 3D printer appeared with us not so long ago. Although we saw her at an exhibition in the USA two or three years ago. It all started with a confectionery, but now in one of the restaurants in Moscow you can try squid, which is made on a 3D printer, and it cannot be distinguished from the one that lived in the sea and was specially caught.
But this, of course, is a technology of a very distant future, when humanity will face a shortage of squid for all the inhabitants of the world.
Robot in the kitchen
Video: Robo Hunter/YouTube
A robot instead of a cook or a waiter is a real future. Now there are already fast food chains where work is organized completely automatically. A person comes, orders, a robotic system makes fried wings and gives them out. Many people go to this. Cafes will become such big automatic feeders. But there will always be places where you can get emotions, communication, mood and dialogue. One cannot replace the other.
Artificial intelligence instead of people
There will come a time when being served by a person in any service sector will become the privilege of rich people.
For example, if a person is poor, then his children will be taught by robots, and wealthy people will be able to afford a human teacher. Probably the same will happen with restaurants.
Struggle for the consumer
Does the person who orders home delivery take a piece of bread from restaurants or shops? Surveys show that delivery is now more competitive with going to the store. Delivery discourages people from cooking at home, but not going to restaurants.
Is delivery always good?
A very limited set of dishes is suitable for delivery. The dish dies within three to five minutes on distribution. And when it travels for 40 minutes in boxes - sometimes in the heat, sometimes in the cold - it is very doubtful that it will arrive in the best possible way. Lettuce flows, pasta boils in a thermobox, a medium-roasted steak cannot be eaten when cooled down. Even sushi, which is very popular in delivery, should be served with warm rice. When it cools, it sticks together into a lump.
For delivery, you need a completely different menu, which the chef immediately comes up with not on a plate, but in a box.
Moscow street food
Street food in Moscow is getting better and more varied. If earlier it was entirely associated with large international burger-chicken companies or some incomprehensible shawarma, now there is enough street food. Muscovites no longer face the question of where to go for a bite to eat.
The evolution of Moscow gastronomy
I started in the restaurant business a long time ago, in those days the city was a collection of network concepts. You walked along any street, and there were sure to be "Chocolate Girl", Il Patio, "Coffee House". Then they were replaced by brighter and more individual projects. Following this, a beloved small business began to develop. The city was filled with many different points with very simple and understandable food. This is the same case when three friends organized, chipped in and opened some kind of coffee shop or burger.
In such stories, a lot of different food is born. Street food markets, gastroclusters, markets where beginners can try themselves have become a great help to this.
Russian folk food
We have a very complicated history with Russian cuisine. You can hardly find restaurants with it in Moscow. There are maybe five restaurants that deal with our national cuisine purposefully. Many chefs and restaurateurs are now puzzled by this question. If you come to Spain, then paella is everywhere and everyone eats it. You come to Italy - pizzerias at every turn. The main cuisine in the country is the local cuisine.
Who killed Russian cuisine
Soviet cuisine killed Russian. “The Book of Tasty and Healthy Food” was published at a time when there were no products in the country and our entire cuisine was reduced to vinaigrettes, olivier - many dishes seasoned with mayonnaise. These traditions arose from hunger, from the lack of quality products. We confuse two concepts - Russian and Soviet.
Before the revolution, we were a very gastronomic country. We brought the French, they cooked our dishes. Our turnip has been reimagined with French influence. But ordinary people traditionally ate "shchi and porridge - our food." Food 100 years ago was as simple as possible, and it’s not a fact that a modern person would like it. Modern chefs are now rethinking Russian cuisine, but it is still far from street food.
The City on July 13
3D printers in cafes: luckyea77 — LiveJournal
3D printers provide great opportunities for developing engineering skills, but have not yet become widespread in everyday life. And despite the affordable prices, people are still not keen to buy them home. In Europe, entrepreneurs have found a neat way to popularize this technology and are opening 3D printing cafes en masse.
3D printing is a fairly fresh and hyped topic among an advanced audience. The idea of bringing some object with you, scanning it in a special scanner and printing a copy on a 3D printer, while drinking coffee, also looks curious.
This is how European entrepreneurs came up with the idea to open a 3D printing cafe.
The format turned out to be so popular that such establishments appear in large quantities not only in Europe, but also in Mexico, Japan and the USA. Although in America, 3D printing cafes already have a strong competitor in the face of informal invention and development workshops that have become popular with the rise of technology startups.
Of course, the entrepreneurs who opened 3D printing cafes are themselves fans of this technology, but it is thanks to such fans that innovations are gradually entering our lives.
Such cafes and workshops of makers solve an important task in promoting technology to the masses, teaching ordinary users how to work with 3D printers. After all, the process of its use often seems extremely complicated to the inexperienced public.
In fact, printing a 3D model is not so difficult at all. First you need to scan the object on a 3D scanner or create a three-dimensional model of the future “printout” from scratch.
The resulting data file is then loaded into a 3D printer, which melts a special polymer and squeezes the heated mass through a moving head in a thin stream, after which the polymer solidifies. Therefore, the object is printed layer by layer: first, the printer traces the contour of the layer, and then successively fills the inner space. That is why the model of the object must initially be created taking into account this feature.
Freshly baked cookies and a robot
A consumer 3D printer can print medium-sized objects based on the interior of the device's camera.
If you want to print, for example, a full-length figure, you will have to make it in parts, and then glue it.
Of course, there are industrial 3D printers that can print large objects using metal or ceramics, but due to their complexity and high cost, they are not available to a wide audience.
For many categories of users, a 3D printer is simply indispensable. Regular visitors to cafes and workshops are students of technical specialties, architects, modelers, inventors, innovators and start-ups, who often need to create a prototype of the details of a future device and test it before sending it to the series.
It is to these activities that fans of 3D printing seek to attract a mass audience.
Japanese Makers Cafe
Ordinary users also use 3D printers, for example, to make an original gift for friends in the form of a superhero figurine with a birthday person's face, copy a rare item and make some kind of individual decoration or interior element.
The cafe format entails certain costs, including the rent of the premises, so the prices for using a 3D printer are quite high and range from $8.5 to $13.5 per hour. 3D printing training courses will cost visitors from $50 to $300. Nevertheless, such establishments very quickly begin to make a profit, because 3D printer cafes are very profitable for their manufacturers, who provide entrepreneurs with equipment and consumables for free and share income from the sale of printers to visitors.
Teaching 3D printing is becoming more and more popular with parents who want to not only provide their children with leisure time, but also teach them technological skills that will be useful in the future.
