(506) 2240-6804
3D printed small box
▷ small box with lid 3d models 【 STLFinder 】
Small Box With Lid
thingiverse
A small box with lid.
small box with lid
thingiverse
small test box with lid
small box with lid
thingiverse
small box with inset lid
small box with lid
prusaprinters
this is just a small box with a lid made in fusion 360. It is great for storing small thing like sd cards or usb sticks. Made by Fabian in fusion 360 and printed with fiberlogy pla.
Small Box with lid
thingiverse
Just a small 3" x 2" x 1" Box 0.10in thick with a lid that has a recess to lock it into the box.
Small box with lid
thingiverse
A small box and lid, used in conjunction with a watermelon charm I made: http://www.thingiverse.com/thing:773531 Should fit most small items of jewelery.
Small Box with Lid
thingiverse
This is a very little (20mm^2) box, with a matching lid.
It prints quickly on a MakerBot or RepRap, and the lid fits snugly. It is perfect for carrying very small things, like one marble... It is a great little demo print to show off your...
small box with lid
cults3d
A small box of 60 * 40 * 25 with its cover
Small box with lid
pinshape
A box you can make any size, just make sure to scale the lid to the same size as the box so they fit together. ...Enjoy!
Small Box With Lid
thingiverse
http://www.
thingiverse.com/apps/customizer/run?thing_id=734598 Instructions Using the following options: bottom_height = 30 y_width = 60 lip_height = 8 thickness = 1.6 looseness_offset = 0.25 lip_overlap_height = 2 generate_box = 1 radius = 5...
small box with lid
thingiverse
... rectangular infill pattern and a solid surface thickness of 2 layers. Nozzle temperature was about 220°C and the substrate (glass coated with ABS-Aceton solvent) was heated to 90°. The weight of the box including the lid is approximately 0.05 kg.
Small box with lid
prusaprinters
This is a small box that I created to hold a circuit board for the headlight range control of the VW T5.
The box is needed for the conversion of normal headlightsto LED headlights to bring the electrics for the height regulation under. MLWR...
Small box with lid 32x24x10mm
thingiverse
... ... It was made to fit a mini buck/step-down converter Files: box.stl - basic box bottom box-mountable.stl - added 4 M3 holes for easy mounting box-top.stl - top of the box It was designed with tolerances in mind, so 0.2mm is left from the top piece.
Small box with lid tobacco pocket box
thingiverse
A small box with a compartment that I use for tobacco. Fits in pocket nicely and keeps tobacco separate.
Can be used for other things.
...
Size is: 90mm by 70mm by 28mm
Large compartment is 36mm wide.
Small box with lid - 45 degree fix
thingiverse
5cm x 6cm x 3 cm box. ...The original file I used had sharp drop offs (parts of print with no material underneath). I made sure that all parts of this print had at least a 45 degree build up. ...added 3 different hole types.
Small rounded box with lid
thingiverse
Small rounded box with lid. I designed it quite "massive" but i like it:)
There is thread inside so you can easily just screw it when you want to close it.
Easy print, no support.
Fusion 360 file included if you want to modify it.
... My...
Small Box with Threaded Lid
thingiverse
A small box with a threaded lid. Small enough to fit in your pocket or in a drawer. ...Fits small parts, medicine or any small objects.
Small Box with Hinged Lid
thingiverse
... in a bag. Much easier to organize and identify. The lid snaps onto the box and stays where you put it. You can print it with fairly low infill, but don't go too hollow on the lid so it doesn't break when snapping it on or off the box.
Small box with sliding lid
thingiverse
A small box, to put small items in.
You can look through it. ... Box: 40 x 40 X 44 mm Lid: 38,5 X 41,2 x 2,2 mm
Small Box With Magnetic Lid
thingiverse
Instructions I printed the box with letters in it which I removed so the STL files are generic so to speak. The lettering can be changes in the CAD file to anything you want. I printed the orange letters later and insterted them since I don't have a...
Small box with Sliding Lid
thingiverse
This is very basic box with a sliding lid. Dimensions are 5x5x4cm. The lid is a tight fit but does loosen up with use. ...
I printed this in low resolution because I didn't need anything else and it works fine and feels sturdy.
small Round Box with Lid
thingiverse
Customized version of http://www.thingiverse.com/thing:189264 Created with Customizer! ...http://www.thingiverse.com/apps/customizer/run?thing_id=189264 Instructions Using the following options:...
Small box with lid and covered magnetic clasp
prusaprinters
Kleine Box mit Deckel, verdecktem Magnetverschluss und Motiv im Deckel.Es ist auch ein neutraler Deckel dabei, den jeder selbst gestalten kann.Für die Motive ist im G-Code ein Farbwechsel drin.Die Magneten sind Neodymmagneten mit 7mm Durchmesser und.
..
Customized Small Box with lid and rounded corners for earplugs
thingiverse
Customized version of http://www.thingiverse.com/thing:72070 Created with Customizer! ...http://www.thingiverse.com/apps/customizer/run?thing_id=72070 Instructions Using the following options: height =...
Small Box with Lid V.1
thingiverse
First Thing fully mad by me in CAD. ...Sorry it is sideways just flip in slicer before printing.
Small Storage Box with lid and hinges
prusaprinters
So I have decided to design this small storage box and lid using hinges in Fusion 360.
My original design had a 3 mm steel dowel for the hinges. This simpler revision is using PLA filament instead of a steel dowel . So there is no need to get...
Citadels Small Box with sliding lid
thingiverse
Remix of ssxdan 'Citadels tiny travel box' to use a sliding lid that can stay closed via friction. Also remixed in the logo from 'Citadels (2016) travel box' by aur3lius (https://www.thingiverse.com/thing:3000974). ... If you want the lid in dual color...
Citadels Small Box with sliding lid
prusaprinters
Remix of ssxdan 'Citadels tiny travel box' to use a sliding lid that can stay closed via friction.
...Also remixed in the logo from 'Citadels (2016) travel box' by aur3lius (https://www.thingiverse.com/thing:3000974). If you want the lid in dual color -...
simple small storage box with lid
myminifactory
hi this is a small storage box i printed it at 75% to print it faster but will scale very well. at 100% it is 100mm across. ...please like and follow for more prints to come and if you print this please post a picture I would like to see thank you.
Small storage box with lid and tray.
thingiverse
Outside dimensions 88mm x 122.5mm x 25 A friend wanted some storage boxes for small items, and as we couldn't find anything of the size they needed, I figured I'd print some.
This was the prototype, at half the desired length and width to work out...
CREATEK 3D Printable Storage Boxes
We set out to make a 3D printable product line. Something consumers can download and print at home. We’re starting with a small series of universal storage boxes. Simple, stackable, and designed for FFF 3D printing.
Today, we invite you to test our MLP (minimum lovable product). Consider this version one. We understand this version is not the most innovative, but we believe in starting small and iterating fast.
We’ll improve the product and expand the offerings as we collect feedback. You can help us out by downloading and 3D printing our files below, followed by sharing your thoughts via our feedback survey.
Happy Printing!
-Kevin from PDO & Noah from NMD
Table of Conents
- Storage Box Features
- Naming Convention
- Free STL Downloads
- Change Log: What’s New
- Printing Recommendations
- Get Notified – Product Updates
- Feedback Survey
CREATEK Storage Box Features
All of our storage boxes stack, including a combination of smaller sizes that nest on a larger one.
Our unique design includes reinforced corners, providing extra-durable 3D prints – less warping.
All of our designs consider FFF 3D printing, including orientation, durability, and printing speed.
All of our designs are optimized to print without supports or rafts. Yes, we despise them too!
Each design includes a part number, making it easier to keep track of your prints and print more.
Our sizes scale with a 50mm grid, making it easy to utilize a combination that suits your needs.
Change Log: What’s New
| What’s New | Date Published | Link |
|---|---|---|
| G (grid) models released: G-100, G-200, G-300, G-400 | March 24, 2022 | Grid Series |
| S-400 models released | March 13, 2022 | 400 Series |
| Createk Product Launch: S-100, S-200, S-300 models released | February 22, 2022 | 100 Series |
CREATEK Naming Convention
Each model includes a letter and a series of three numbers.
The letter represents the model type outlined below (more to be added in the future). The numbers represent the X, Y, and Z dimensions (in order) in increments of 50mm. For example, S-331 is our Standard box with a 150mm length (3x50mm), 150mm width (3x50mm), and 50mm height (1x50mm).
S = Standard
G = Grid
Free STL Downloads
Select your desired model number below.
Standard Files
- S-111 (v1.0)
- S-211 (v1.0)
- S-221 (v1.0)
- S-311 (v1.0)
- S-321 (v1.0)
- S-331 (v1.0)
- S-411 (v1.0)
- S-421 (v1.0)
- S-431 (v1.0)
- S-441 (v1.0)
Grid Files
- G-111 (v1.0)
- G-211 (v1.0)
- G-221 (v1.0)
- G-311 (v1.0)
- G-321 (v1.0)
- G-331 (v1.0)
- G-411 (v1.0)
- G-421 (v1.0)
- G-431 (v1.
0) - G-441 (v1.0)
S-111 (v1.0) – Download STL (Thangs)
Our standard 50mm reinforced storage cube stacks with all other models. Perfect for those small parts or miscellaneous goods.
200 SeriesS-211 (v1.0) – Download STL (Thangs)
Our standard elongated 100mm x 50mm reinforced storage cube stacks with all other models. Perfect for tall skinny parts and miscellaneous goods.
S-221 (v1.0) – Download STL (Thangs)
Our standard large 100mm x 100mm reinforced storage cube stacks with all other models. Perfect for pencils, pens, and longer goods.
300 SeriesS-311 (v1.0) – Download STL (Thangs)
Our standard large 150mm x 50mm reinforced storage cube stacks with all other models. Perfect for computer parts, larger objects, and miscellaneous goods.
S-321 (v1.0) – Download STL (Thangs)
Our standard large 150mm x 100mm reinforced storage cube stacks with all other models.
Perfect for cell phones, glasses, or other large parts.
S-331 (v1.0) – Download STL (Thangs)
Our standard large 150mm x 150mm reinforced storage cube stacks with all other models. Perfect for larger objects or for stacking on top of a number of smaller CREATEK containers.
400 SeriesS-411 (v1.0) – Download STL (Thangs)
Our standard large 200mm x 50mm reinforced storage cube. Perfect for elongated objects, such as pencils.
S-421 (v1.0) – Download STL (Thangs)
Our standard large 200mm x 100mm reinforced storage cube. Perfect for larger objects or for stacking on top of a number of smaller CREATEK containers.
S-431 (v1.0) – Download STL (Thangs)
Our standard large 200mm x 150mm reinforced storage cube. Perfect for larger objects or for stacking on top of a number of smaller CREATEK containers.
S-441 (v1.0) – Download STL (Thangs)
Our standard large 200mm x 200mm reinforced storage cube is our largest model.
GRID –
100 SeriesG-111 (v1.0) – Download STL (Thangs)
GRID –
200 SeriesG-211 (v1.0) – Download STL (Thangs)
G-221 (v1.0) – Download STL (Thangs)
GRID –
300 SeriesG-311 (v1.0) – Download STL (Thangs)
G-321 (v1.0) – Download STL (Thangs)
G-331 (v1.0) – Download STL (Thangs)
GRID –
400 SeriesG-411 (v1.0) – Download STL (Thangs)
G-421 (v1.0) – Download STL (Thangs)
G-431 (v1.0) – Download STL (Thangs)
G-441 (v1.0) – Download STL (Thangs)
Printing Recommendations
| Layer Height: | 0.2mm |
| Nozzle Size: | 0.4mm |
| Support: | No |
| Raft / Brim: | No |
The CREATEK line will print well in most PLA and ABS filaments. We do not currently test other filament types at this time.
For best printing results, follow our recommended print settings outlined above.
For all test prints and pictures, we’ve used the following eSun PLA Pro* filament:
- Purple – eSUN PLA PRO (PLA+) 3D Printer Filament
- Green – eSUN PLA PRO (PLA+) 3D Printer Filament
*Disclosure: This post contains affiliate link(s). An affiliate link means I may earn advertising or referral fees if you make a purchase through my link, without any extra cost to you. It keeps my site free, fast, and available to everyone. Thanks for your support!
All CREATEK 3D Printable Storage Boxes are tested with eSUN PRO (PLA+) 3D Printer Filament.Get Notified – Product Updates
CREATEK Feedback Survey (3 minutes)
Here are some future improvements we have planned:
- special version that has magnets in all four corners (in the works)
- universal lids
- version that has spot for labeles
- storage grid to help organize the boxes in drawers
If you’re having printing issues, please share images and details in the PDO Community.
We value your feedback and appreciate everything you share. Your feedback will help us continue to improve the CREATEK 3D printable storage boxes. Please be descriptive, constructive, and include as much detail as possible.
3D File World's smallest 3D printed gearbox・3D printing idea for download・Cults
Worm Gear phone holder (printed on site)
4.65 €
Starting ball marble machine
2.75 €
Experimental phone stand with tension bridge
0.62 €
Flex Robot
2.75 €
Ice cream machine V2
4.65 €
Flexible fox (printed on site)
2.75 €
Modular marble machine
2.
75 €
Ultra-thin phone stand
4.65 €
Best 3D Printer Files in the Gadget Category
3DTAC / Airsoft Helmet Rail Flashlight Adapter
Free
Stand for Apple Pencil
Free
Twitch Drone Chassis for ZeroBot
Free
GoPro Holder
Free
skull helmet support
13 €
T-34/85 RC model 1:16 scale
5.69 €
Nintendo Switch Game Cartridge Fan Case
2.89 €
Folding sword - NO SUPPORT Version 3
1,25 €
Bestsellers in the Gadget category
G17- DD17 Frame with rails
€7.
50
F18 SUPER HORNET - 50 MM EDF JET [RC AIRCRAFT]
11.86 €
Owl - wall key holder
1.85 €
Brush rinse
2.26 €
Mount for GoPro DJI AVATA
2,50 €
ELEPHANT PINK - NO PAINT NEEDED
5 €
V6 engine Seal in place
€1.76 -fifty% 0.88 €
Long-legged dwarf
2.66 €
Double Text Illusion Application
€3.50
Karambit keychain spinner tiktok keyrambit NO BEARING
€1. -ten% 1.54 € 
71
Kinetic floating Christmas tree
1.89 €
BARABA crossbow pistol with aluminum profile core
10 €
Application for cutting cookies
3.50 €
AR-15 LOWER MULTI-CAL. REINFORCED DESIGN
8,50 €
Pringles box
€1.50 -fifty% 0.75 €
Italian hand
1 €
Do you want to support Cults?
Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so it is very easy to support us in maintaining activities and creating future developments of .
Here are 4 solutions available to everyone:
-
ADVERTISING: Disable the AdBlock banner blocker and click on our banner ads.
-
AFFILIATION: Shop online with our affiliate links here Amazon.
-
DONATIONS: If you want, you can donate via PayPal here.
-
* INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community!
50 cool things to print on a 3D printer / Habr
No ideas for 3D printing? Tired of worthless trinkets? Here is a list of 50 cool really useful things for 3D printing.
Like us, you're excited about the possibilities of 3D printing. But, unfortunately, the horizon is littered with trinkets, trinkets and other unnecessary things. We are in danger of being buried under a heap of useless rubbish.
Throw off the shackles of mediocrity! Let's create really useful things! Here is a list of cool things that you can make on a 3D printer right now.
Prove to your family and loved ones that this wonderful technology can be used daily and in practice.
No access to 3D printer? No problem. Just upload your files to our 3D printing price comparison system and choose the best price, ONLINE!
You can change the pattern of the inner pallet if you wish. 
Actually for screwing and unscrewing around the house. 
Printed without support, at the end there is a hole for a lace. 
35: Cetstainer Holder for people with disabilities
Download from MyMiniFactory
Cool thing for 3D printing #37: Paper cup holder
download from Myminifactory
Cool thing for 3D Press No. 38: Case for blades
Myminifactory
Cool thing for 3D printing №39: Holder for children's bottle from MyMiniFactory
3D Printable Cool Item #40: Towel Rack
Download from MyMiniFactory
3D Printable Cool Item #41: Holder for a glass
download with Myminifactory
Cool thing for 3D print No. 42: Holder for a phone in the shower
download from Myminifactory
Cool thing for 3D printing No. 43: Holder: 9020 for beer glasses
Download from MyMiniFactory
Cool thing for 3D printing #44: MacBook Pro stand
download from Myminifactory
Cool thing for 3D Press No.
