Wanhao duplicator 4 desktop 3d printer


Wanhao Duplicator 4S - 3D Desktop Printer by USAWanhao.com

 

THIS 3D DESKTOP PRINTER SOFTWARE COMPATIBLE  Software/Firmware: ReplicatorG (Opensource), Sailfish (Opensource), Simplify 3D 

Wanhao Duplicator 4S Desktop Printer

 

Say Hello to the newest addition in the Duplicator 4 family, the brand new Wanhao Duplicator 4s!
This is the latest update in the Duplicator 4 series and is really a wonderful printer, it comes with all of the benefits of Duplicator 4x.
It comes in a black steel exoframe, which makes it very stable and vibration safe. The 4s features a heated build plate and fully enclosed build area to ensure accurate prints and a stable temperature which helps prevent shrinking and warping of plastics. The Duplicator 4s is equipped with the new MK10 Dual-Extruder set for dual printing. Use two different colors or use one of the extruders with HIPS or PVA as support material. Other features include upgraded electronics and 1/16 micro-stepping motor control. If you want to unlock the full potential of the printer we recommend that you buy SIMPLIFY 3D with the printer, but if you choose not to, ReplicatorG is included.

Features:
• Extruder: New! MK10 Dual-Extruders
• Filament Size: 1.75mm Dedicated
• Layer Capability: 0.1mm - 0.5mm
• Build Envelope: 225mm x 145mm x 150mm
• Filament Capabilities: ABS, PLA, PVA, NYLON, HIPS and other common filaments.
• Software: ReplicatorG (Opensource)
• Warranty: 1 Year Limited Warranty
• Frame Color: Black Steel Exoframe
• Heated build plate

 

The Duplicator 4s has our latest dedicated 1.75 mm filament extruder. This extruder was designed from scratch, and contains a number of custom manufactured parts. We've learned a lot over our past extruder designs, and incorporated a lot of those lessons here: that's why it's smaller, lighter, and faster to build. And since it's designed from the ground up for 1.75 mm filament, it's light-years ahead of past designs in small-filament reliability. The layer alignment is much better which results in nicer prints and higher resolution, 100 micron inch. We've completely overhauled the drive system to give the optimum positioning accuracy. The entire system has been upgraded to sturdy 3/8″ diameter linear shafting. This is probably overkill, but you can trust that the axes will be sturdy. We've also switched to self-aligning, sintered stainless steel bearings. These are very forgiving to DIY assembly and provide a nice, smooth motion on the steel shafts. We've completely replaced the Z axis with a stepper driver, centilevered stage. Guided by two of the linear shafts, this completely eliminates any Z wobble and results in nicely aligned layers. Using a high-angle lead screw, we were able to increase the speed of the Z axis from 150mm/minute to 1,000mm/minute. This means the layer changes are almost completely imperceptible.

 

Connect over USB and hit print - the machine will calibrate itself and start printing. The new electronics have been designed to make the printing experience easier than ever. The Duplicator 4s connects to your computer via a standard USB cable thanks to a USB chip on the motherboard. We've also added full end stop support so that you never need to touch the XYZ axes ever again. When you hit print, the machine will automatically home itself, heat up, and begin printing. All you have to do is sit back and relax while your Duplicator 4s does all the work. Living in the future is awesome. Oh yeah, and the electronics are all inside, so you don't have wires dangling everywhere.

 

Or you can print with SD card. Sometimes customer failed in printing with computer USB link, due to the computer sleep or shut down automatically. For this reason, we developed SD card reader on printer. Awesome, all your printer job can be done by this small card. 2Gb card is sufficient for any 3D file and keep as many file as you like. Simple and fast is our mission.

 

WANHAO DUPLICATOR 4 USER MANUAL Pdf Download

Table Of Contents

3
  • page of 48

  • Contents
  • Table of Contents
  • Troubleshooting
  • Bookmarks

Advertisement

Table of Contents

  • Table of Contents

  • Welcome Let's Get Started

    • Specifications
    • How Does It Work

  • SETTING up YOUR WANHAO DUPLICATOR 4/4X DESKTOP 3D PRINTER

    • What's in the Box

    • Unpacking Your Wanhao Duplicator

    • Installing Build Plate

    • Installing Filament Guide Tube and Spool Holder

    • D Printer

  • Startup Porcess: Leveling, Loading, Testing

    • Leveling the Build Plate

    • What You will Do

    • Making a Test Object from the SD Card

    • Download and Install Wanhao Replicator G
    • Download an Object from Wanhao Thingshares

    • Open Wanhao Replicator G

    • Open Wanhao Replicator G

  • D.

    Making an Object with Wanhao Replicator G
    • Troubleshooting

    • Diagnostics

    • LCD Panel/ Top-Level Menu

    • LCD Panel/ Info and Setting Menu

    • Maintenance

    • Lubricating the Threaded Rod and the X-Axis Idler Pulley

    • Cleaning the Drive Gear

    • Glossary of Terms

    • Contact

Duplicator 4/4x

Desktop 3D Printer

USER MANUAL

---------------------------

---------------------------

Table of Contents

Previous Page

Next Page

Table of Contents

Related Manuals for WANHAO Duplicator 4
  • 3D Printers WANHAO DUPLICATOR 7 User Manual

    (30 pages)

  • 3D Printers WANHAO Duplicator i3 User Manual

    (16 pages)

  • 3D Printers WANHAO Duplicator 5S User Manual

    Desktop 3d printer (14 pages)

  • 3D Printers WANHAO Duplicator 5 User Manual

    (18 pages)

  • 3D Printers WANHAO Duplicator I3V2 Instruction Manual

    (60 pages)

  • 3D Printers WANHAO Duplicator 5S User Manual

    Resolution 0. 02mm, speed 300mm/second (13 pages)

  • 3D Printers WANHAO DUPLICATOR I3 MINI Instruction Manual

    (38 pages)

  • 3D Printers WANHAO MARK II Duplicator 6 Plus User Manual

    (46 pages)

  • 3D Printers WANHAO Duplicator 8 MARK I User Manual

    High resolution resin 3d printer (31 pages)

  • 3D Printers Wanhao Duplicator 7 Plus User Manual

    High resolution resin 3d printer (29 pages)

  • 3D Printers WANHAO Duplicator 7 plus User Manual

    High resolution resin 3d printer (39 pages)

  • 3D Printers WANHAO Duplicator i3 Setup

    Unboxing and hardware (11 pages)

  • 3D Printers WANHAO Duplicator 10 Instruction Manual

    Desktop 3d printer (38 pages)

  • 3D Printers WANHAO Duplicator 3/4 User Manual

    (13 pages)

  • 3D Printers WANHAO Duplicator i3 Software User Manual

    Cura edition (25 pages)

  • 3D Printers WANHAO Duplicator i3 First Run Experience

    (12 pages)

Summary of Contents for WANHAO Duplicator 4
This manual is also suitable for:

Duplicator 4x

0003

Go to the store

Wanhao Duplicator 4000

3D printer with two extruders and closed housing

(300/3)

Widespread 3D printer 300/400/500 mm with a car row

Go to store

Wanhao Duplicator 9 Mark II (D9/400)

003

Go to store

Wanhao Duplicator 9 Mark II (D9/500)

Widesply 3D printer 300/400/500 mm with a car river

3D 3D Wanhao Duplicator D12/230

New 2020 - Wanhao D12 230 3D printer is the first model in the new D12 series. The model offers advanced printing options with two MK12 extruders. Print models with two colors of plastic or complex products with soluble supports.

Go to store

3D printer Wanhao Duplicator D12 300

Wanhao D12 300 is equipped with a reliable extruder with a high torque, has a circular explosion, and a large area of ​​construction and double extraception, and make it most tent device. Prints large models in one or two colors.

Go to Store

Wanhao Gadoso GR2 3D Printer

3D printer Wanhao - Gadoso Revolution 2 , or simply GR2, is very similar to the Duplicator 6 Plus, but the design of GR2, due to numerous requests from users, has been changed. Pinter is equipped with a modern motherboard, camera and Touch Screen display.

Go to the store

3D printer Wanhao Gadoso GR2 with acrylic Corps

3D Printer Wanhao - Gadoso Revolution 2 with an acrylicate building in the preliminary can print not only PLA plastics, but also many engineering materials: ABS, PLA, PETG, Flex, Nylon (Nylon), others. The pinter is equipped with a modern motherboard, 2K camera and Touch Screen display.

Go to the store

Wanhao GR1 photopolymer 3D printer (Gadoso Revolution 1)

It has an ultraviolet LED-matrix using Uniformtrix technology, which guarantees a uniform light flux over the entire print area.
Licensed software included.

Go to the store

Wanhao Duplicator 8 (D8) Red Edition - updated version with license

It has a large print area (192x120x180 mm), which allows it to be used even for mass production of jewelry. It is perfect for high-precision dental tasks: making models, aligners, implants, etc. Printer operation is compatible with virtually all software used in the industry.

0 to 210 degrees. Nozzle diameter - 0.4 mm. Duplicator i3 Plus is designed to work in a warm room, it is desirable that the temperature does not fall below +25 degrees. The heated platform of the printer is heated to a temperature of 40-70 degrees.

Learn more