Home » Misc » Goedkope 3d printer

Goedkope 3d printer


The Best Cheap 3D Printers for 2022

While we'd hesitate to call 3D printing a mature technology, you might say it has reached its teenage years. Through their first decade-and-change, 3D printers have come down in price, grown easier to set up and operate, and become more reliable. And you may pay less than you expect: Many once-high-end features have migrated down to inexpensive models.

PC Labs has been reviewing 3D printers since 2013. Today, the state of 3D printing is strong, but that wasn’t always the case. For the first several years, it was often an adventure getting one of these printers up and running, let alone successfully through our testing regimen. Issues with filament-based—aka fused filament fabrication (FFF) or fused deposition modeling (FDM)—printers were abundant.

Filament feeders had to be coaxed into delivering filament from the spool to the extruder. Print beds had to be manually aligned. The extruder or hot end had to be positioned just right to minimize the gap between the nozzle and the build plate (the flat surface on which the object is printed). Objects frequently stuck to the build plate, and required careful, sometimes unsuccessful, efforts to pry them off. These and other issues required painstaking effort to resolve, often combined with calls to tech support.

Not so much anymore. While they can still be rebellious at times, 3D printers have grown up a lot, and achieving the 3D printer basics has gotten a lot less likely to end in a shouting match over small things. And they've gotten a lot more affordable, too, for curious DIY-ers and hobbyists to try.

If you're in the market for a beginner or low-cost 3D printer, it's important to know how lower-end models differ. Read on for mini-reviews of the top budget 3D printers we've tested. After that, we go into more detail on understanding the 3D printer specs and tech relevant to beginning buyers. Ready to take the plunge? Read on.

Original Prusa Mini

Best Overall Budget 3D Printer

4.5 Outstanding

Bottom Line:

It requires assembly and calibration care (plus shipping from the Czech Republic), but the Original Prusa Mini is a compact, open-frame 3D printer that consistently produces superb-quality output for a great price.

PROS

  • Top-notch object quality
  • Supports a variety of filament types
  • Useful, professionally printed user guide
  • Great support resources
  • Versatile, user-friendly software

CONS

  • First-layer calibration can be tricky
  • Only includes starter packets of filament
  • Requires monitoring if young children or pets are around

Sold By List Price Price
Prusa Research $399.00 $399.00 See It (Opens in a new window)

Read Our Original Prusa Mini Review

XYZprinting da Vinci Mini

Best Budget 3D Printer for Schools, Community Centers

4.0 Excellent

Bottom Line:

The XYZprinting da Vinci Mini is a consumer-oriented 3D printer that provides a winning combination of low price, ease of setup and use, solid print quality, and smooth, misprint-free operation.

PROS

  • Very low price.
  • Reasonably priced filament.
  • Good print quality.
  • No misprints in testing.
  • Easy setup and operation.
  • Quiet.
  • Prints over a USB or Wi-Fi connection.

CONS

  • Occasional problems in trying to launch prints.
  • Removing printed objects from the print bed is sometimes tricky.

Sold By List Price Price
Walmart $199.95 $199.95 See It (Opens in a new window)
Amazon $199.95 $199.95 See It (Opens in a new window)

Read Our XYZprinting da Vinci Mini Review

Toybox 3D Printer

Best Budget 3D Printer for Children

4.0 Excellent

Bottom Line:

The Toybox 3D Printer works well as a model designed for children, offering reliable printing from a browser or mobile device and a few thousand toys to print, plus creative options to output drawings or photos. Just bear in mind the tiny build area.

PROS

  • Reliable, misprint-free printing
  • Easy setup
  • One-touch operation
  • Well-composed help resources
  • Access to more than 2,000 printable toys and projects
  • Lets you create your own printable designs

CONS

  • Tiny build area
  • Not ideal for importing 3D files created elsewhere

Sold By List Price Price
Amazon $299.00 $299.00 See It (Opens in a new window)
Toybox Labs $379.00 $299.00 See It (Opens in a new window)

Read Our Toybox 3D Printer Review

Monoprice Mini Delta V2 3D Printer

Best Budget 3D Printer for Beginners, Non-Techies

4.0 Excellent

Bottom Line:

3D printing gurus will be intrigued by the Monoprice Mini Delta V2's use of the delta rather than Cartesian coordinate system, but beginners will just enjoy its low price, ease of use, and speedy printing.

PROS

  • Sub-$200 price
  • Quick, nearly misprint-free printing
  • Easy setup and operation
  • Sturdy steel-and-aluminum frame
  • Supports multiple filament types

CONS

  • Tiny build area
  • So-so print quality
  • Mere one-year warranty

Sold By List Price Price
Amazon $179.99 $179.99 See It (Opens in a new window)

Read Our Monoprice Mini Delta V2 3D Printer Review

Anycubic i3 Mega S

Best Budget 3D Printer With an Open Design, Big Build Area

3.5 Good

Bottom Line:

The Anycubic i3 Mega S, an inexpensive open-frame 3D printer, produced decent-quality prints in our testing. To get the most out of it, though, may require precise calibration.

PROS

  • Modestly priced
  • Large build area for an inexpensive printer
  • Supports a variety of filament types
  • Generally solid print quality
  • Uses well-known Cura software

CONS

  • Finicky print-platform alignment
  • Supported coils of filament are small
  • Poorly placed spool holder

Sold By List Price Price
Amazon $229. 98 $229.98 Check Stock (Opens in a new window)
AnyCubic $279.00 $279.00 Check Stock (Opens in a new window)

Read Our Anycubic i3 Mega S Review

Anycubic Vyper

Best Budget 3D Printer for the Biggest Build Area Possible

3.5 Good

Bottom Line:

Anycubic's modestly priced Vyper whips up large 3D prints on its open-frame design, and provides automatic print-bed leveling. Just know that some minor assembly is required—and printed objects may require a bit of cleanup.

PROS

  • Relatively large build area
  • Automatic bed leveling
  • Simple assembly

CONS

  • Short (one-year) warranty
  • Includes only a small starter filament coil
  • Using Cura software with the Vyper requires tweaking a couple of settings
  • Test prints showed some "hairy" filament residue

Sold By List Price Price
Amazon $429. 99 $429.99 See It (Opens in a new window)
AnyCubic $369.00 $319.00 See It (Opens in a new window)

Read Our Anycubic Vyper Review

Creality Ender-3 V2

Best Budget 3D Printer for Tinkerers and DIY Types

3.5 Good

Bottom Line:

Hands-on tweaking defines Creality's budget-price Ender-3 V2, an open-frame 3D printer that you build from a kit. It produces generally above-par prints, but its print bed can be tricky to keep leveled.

PROS

  • Inexpensive
  • Slightly above-average print quality
  • Good-size build area for its price
  • Supports several filament types

CONS

  • Manual print-bed leveling can be tricky
  • Setup instructions could be deeper, more legible
  • Questionable quality control on some parts

Sold By List Price Price
Amazon $299. 00 $246.00 See It (Opens in a new window)

Read Our Creality Ender-3 V2 Review

Flashforge Finder 3D Printer

Best 3D Printer for the Very Tightest Budgets

3.5 Good

Bottom Line:

The Flashforge Finder 3D Printer is moderately priced and offers good print quality, but it proved tricky to get up and running in our tests.

PROS

  • Quiet.
  • Good print quality.
  • Connects via USB 2.0 cable, USB thumb drive, or Wi-Fi.
  • Reasonably priced.

CONS

  • Some objects pulled off the platform during testing.
  • Poor documentation.
  • Modest build volume.
  • Limited to printing with polylactic acid filament (PLA).

Sold By List Price Price
Amazon $729.00 $729.00 Check Stock (Opens in a new window)

Read Our Flashforge Finder 3D Printer Review

Polaroid PlaySmart 3D Printer

Best Budget 3D Printer for Dabbling in Small Objects

3. 5 Good

Bottom Line:

The Polaroid PlaySmart 3D Printer is a compact, stylish 3D printer with above-par overall print quality, but, alas, a tiny build area for the money.

PROS

  • Small, lightweight for a desktop 3D printer.
  • Easy to set up and use.
  • Supports PLA, PETG, and wood composite filaments.
  • Multiple-color support.
  • Wi-Fi camera monitors print jobs.
  • Prints from USB drives, SD cards, or mobile devices.

CONS

  • High price for its capabilities.
  • Small build area.
  • Too-brief warranty.

Sold By List Price Price
Amazon $699.00 $699.00 See It (Opens in a new window)

Read Our Polaroid PlaySmart 3D Printer Review

XYZprinting da Vinci Jr. 1.0 A Pro

Best Budget 3D Printer With Closed Design, Roomy Build Area

3. 5 Good

Bottom Line:

The XYZprinting da Vinci Jr. 1.0 A Pro is a moderately priced closed-frame 3D printer with a large build volume and overall good performance, but a potentially balky filament-feeding system.

PROS

  • Spacious build area
  • Works with third-party filaments
  • Self-leveling print bed

CONS

  • Build plate is not heated
  • Limited to PLA- and PETG-based filaments
  • Guide tube is prone to detaching

Sold By List Price Price
Amazon $299.95 $199.95 See It (Opens in a new window)
Best Buy $449.95 $449.95 Check Stock (Opens in a new window)

Read Our XYZprinting da Vinci Jr. 1.0 A Pro Review

Monoprice Voxel 3D Printer

Best Budget 3D Printer for Cheap Filament

3. 0 Average

Bottom Line:

The Monoprice Voxel is an under-$400 3D printer that's easy to set up and use. It exhibits generally good print quality, but it was unable to print two of our test objects.

PROS

  • Easy to set up and use.
  • Budget price for printer and filament spools.
  • Supports PLA, ABS, and several composite filament types.
  • Versatile software.
  • Prints over Ethernet or Wi-Fi, or from a USB thumb drive.

CONS

  • Frequent misprints on certain test objects.
  • Slightly balky touch screen.

Sold By List Price Price
Amazon $449.99 $369.26 See It (Opens in a new window)
Walmart $429.99 $369.26 See It (Opens in a new window)

Read Our Monoprice Voxel 3D Printer Review

Buying Guide: The Best Cheap 3D Printers for 2022

How to Buy a Cheap 3D Printer

The biggest changes to 3D printers over the last few years have come to the cheaper models. Nowadays, many of those classic, ornery 3D-printing issues have been resolved (most of the time, anyway), even for consumer and bargain-priced 3D printers. Automatic print-bed leveling is the norm, and you can usually remove 3D-printed objects from heated and/or flexible build plates with a minimum of coaxing. And most 3D printer manufacturers have either developed and refined their own software, or have adapted an open-source printing platform such as Cura(Opens in a new window).

(Credit: Zlata Ivleva)

What separates more expensive 3D printers from cheap ones ("cheap" defined as $500 or less, for the purposes of this article) is often a select group of features. These include the build volume, the type of frame, the varieties of supported filament, the software, and the connectivity mix. Let's run through those in turn.

What's the Right Build Volume for a 3D Printer?

A 3D printer’s build volume is the maximum dimensions (HWD) of a part that it can print. (We say “a part” because a 3D-printed object can consist of multiple parts that are printed, then glued or otherwise pieced together.) While the smallest build volume of any 3D printer we have tested is 3.9 by 3.9 by 4.9 inches, we consider any build volume smaller than 6 by 6 by 6 inches to be small, any between that and 10 by 10 by 10 inches as medium, and any printer with at least one build dimension of more than 10 inches as having a large build volume.

(Credit: Molly Flores)

As a general rule, inexpensive 3D printers have small build volumes, while more expensive ones have larger build volumes. This depends in part on the type of printer. Closed-frame 3D printers—and most semi-open models, which have a rigid top, base, and sides but are open in front and, often, back—tend to have small build volumes, while open-frame printers, lacking as rigid a physical structure, often have relatively large build volumes for the price. You'll want to weigh the build volume against the kinds of objects you will print.

Should I Get an Open-Frame or Closed-Frame 3D Printer?

Which brings us to the frame "form factor" question: open-frame versus closed-frame. Closed-frame 3D printers are boxlike devices, with a rigid base, walls (with a see-through door in front), and top. Among their advantages? They muffle the operating noise, as well as reduce the odor from melted filament (which is potentially an issue with ABS plastic), and they provide some protection for people or pets who might inadvertently touch the hot extruder. A downside: They tend to have smaller build volumes than open-frame 3D printers, which have fewer (often, no) walls to constrict them.

(Credit: Zlata Ivleva)

Low-cost 3D printers include both open-frame and closed-frame models, as well as a few stereolithography printers. If a relatively large build volume is a priority, you’re likely to get more bang for the buck with an open-frame model. Open-frames do have some clear downsides by definition: They tend to be noisy, emit odors when certain plastics are melted, and provide little protection for someone who might touch the hot extruder.

(Credit: Molly Flores)

Also, recognize some potential negatives of open frames, depending on the model. Some require assembly, being essentially kits, and most require more setup care than a closed-frame printer, plus more maintenance to keep them running smoothly. Still, these very traits should not deter—and may even appeal to—hobbyists and DIY folks.

What Should I Look for in 3D Printer Software and Connectivity?

Gone are the days when tinkerers had to cobble together several different programs to get a 3D printer to run. Manufacturers either include their own 3D printing program or modify an existing platform such as the open-source Cura.

3D printing software performs three main functions: processing an object file (resizing, moving, rotating, and in some cases duplicating it), slicing it (into virtual layers, based on your chosen resolution), and printing it. These are almost universally combined into a seamless process. Some high-end printers have software that supports a wider range of settings you can tweak, but even the basic suites work at least reasonably well.

More likely to vary among the cheaper set is the array of connection options from model to model. Nearly all have a USB Type-A port to fit a thumb drive for printing from document files. Most also have a USB Type-B port for connecting directly to a computer, and some offer Wi-Fi, too (or as an alternative), while a handful let you connect via Ethernet to share the printer across a local network.

Some printers support storing 3D files on an SD or microSD card (which may also contain the printer’s system files). Most 3D printer manufacturers (even the discount ones) have a mobile app to launch and monitor print jobs, and a few provide access to cloud services from which you can print.

While high-end 3D printers tend to have an abundance of connection choices, discount models vary widely in their choices. Some are generous and some are basic, so it pays to assess what a given model offers.

What Should I Look for in Filament Support?

Filament support tends to be a key area that separates the cheaper models from the higher-end ones. (See our guide to understanding 3D printing filaments for more particulars.) Inexpensive 3D printers tend to support a limited number of plastic filament types, some of them only PLA and/or ABS.

Recommended by Our Editors

3D Printing: What You Need to Know

3D Printer Filaments Explained

(Credit: Molly Flores)

PLA (polylactic acid) is a biodegradable, plant-based polymer, while ABS (acrylonitrile butadiene styrene) is the same tough plastic that Legos are made from. Objects printed from ABS are durable and nontoxic, though the material can be tricky to work with. ABS can emit an acrid, unpleasant odor during printing, and the bottom corners of objects being printed with it have a tendency to curl upward a bit, especially if you are using a non-heated print bed. This can lead to unsightly prints, and/or prints prematurely pulling off the build plate, ruining them.

Many entry-level and low-price 3D printers stick exclusively to PLA. If you want to experiment with a larger variety of filaments—which include water-soluble filament, wood- and metal-laced composites, and both tough and flexible varieties—you may have to pay more, although a few discount models support a wide range of materials.

Should I Consider a 3D Printing Pen Instead?

Although they aren’t printers per se, inexpensive 3D pens are close kin to 3D printers—using the same filament types and a similar extrusion system—and we include them in the 3D printing category. Rather than tracing out a programmed pattern, you use the 3D pen much like a normal pen, except that you draw with molten plastic. You can trace a pattern or draw freehand, and even draw in three dimensions as the plastic quickly solidifies and hardens once extruded.

(Credit: 3Doodler)

Most 3D pens cost less than $100, and some cost $50 or less. At a glance, 3D pens may appear to be toys, but some artists and craftspeople have taken to them, as it is possible to make quite complicated and beautiful objects with them. If your aim in 3D printing is something closer to freehand design and free expression than computer-centric, structured, and repeatable output, you might give one a try.

So, What Is the Best Cheap 3D Printer to Buy?

Buying a budget 3D printer needn’t mean a world of sacrifice. Plenty of capable and reliable models sell at less than $500, and while they may not be as feature-rich as their more expensive cousins, there's no sense in paying for things you don’t need.

Many casual 3D-printing experimenters will be fine with printing over a USB cable or from a thumb drive, and sticking to PLA may be the best choice for a starter 3D printer. If you focus just on the features you want, you may be pleasantly surprised at what you find. Below, check out a spec breakdown of the best under-$500 3D printers we have reviewed, paralleling our picks above. Also, for a look at the broader market, see our guide to our favorite 3D printers overall.

5 goedkope 3D-printers voor beginners

Ben jeop zoek naar een goedkope 3D-printer voor beginners?
We laten je 5 beginnersvriendelijke en goedkope FDM-printers onder de 500 euro zien, die we alleen maar van harte kunnen aanbevelen voor je instap in 3D-printen.

Onze criteria voor beginnersvriendelijke 3D-printers

Er zijn inmiddels een groot aantal goedkope 3D-printers voor particulier gebruik. Voordelige toestellen zijn verkrijgbaar vanaf rond de 200 euro en zijn meestal direct klaar voor gebruik. Naast een redelijke prijs zijn voor ons ook andere factoren bepalend, op basis waarvan wij onze top 5 hebben gekozen:

  • Prijs onder de 500 euro
  • Eenvoudige montage
  • Gebruiksvriendelijkheid
  • Goede documentatie / begrijpelijke gebruikershandleiding
  • Goede afdrukkwaliteit

Als je algemene informatie wilt over waar je op moet letten bij het kopen van een 3D-printer en hoe verschillende apparaten verschillen, vind je hier onze uitgebreide guide voor beginners in 3D-printen.

1. Creality Ender V2

De Creality Ender V2 is een solide instapmodel met aantrekkelijke eigenschappen en geweldige prestaties voor een relatief lage prijs. Als opvolger van de legendarische Ender 3 is de Ender V2 volledig geüpgraded en verbeterd.

Dankzij het modulaire ontwerp is de 3D-printer snel en eenvoudig in te stellen, zelfs voor beginners. Een in het apparaat verborgen voedingseenheid zorgt voor een opgeruimd uiterlijk en verhoogt ook de veiligheid.

Grote installatieruimte | Bowden-extruder | Carborundum glasplaat

De Ender 3 V2 heeft een inbouwruimte van 220 x 220 x 250 mm, wat absoluut voldoende is om met 3D-printen aan de slag te gaan, en een hotend die gevoed wordt door een Bowden-extruder. Een draaiknop op de extruder maakt het eenvoudig om nieuw filament bij te vullen. Het verwarmbare bouwplatform is gemaakt van carborundumglas, wat een uitstekende hechting garandeert en snel opwarmt.

De maximale extrudertemperatuur is 255 °C, de maximale temperatuur van het verwarmingsbed is 100 °C.

Resume Print-functie | TMC2208 Stepper Driver | Kleurenscherm

De 3D-printer is uitgerust met de Resume Print-functie, die ervoor zorgt dat het printproces na een stroomstoring probleemloos kan worden voortgezet.

Een speciaal ontwikkeld moederbord met TMC2208 stepper driver zorgt voor soepele bewegingen en een laag geluidsniveau van minder dan 50 dB tijdens het printen.

De printstatus is ook altijd te controleren op een groot kleurendisplay.

Kenmerken van de Creality Ender 3 V2 in één oogopslag

  • Voorgemonteerd
  • 220 x 220 x 250 mm bouwruimte
  • Bowden-extruder
  • Enkele extruder
  • Max. extrudertemperatuur: 255 ºC
  • Max. Verwarmingsbedtemperatuur: 100 ℃
  • Verwarmbaar platform van carborundumglas
  • Resume Print-functie
  • Afneembaar LCD-kleurenscherm
  • Handmatige filamenttoevoer
  • Geluidsarme TMC2208 stepper driver
  • Handmatige bednivellering
  • Riemspanners op de X- en Y-as
  • Gegevensuitwisseling: microSD, USB
  • Meanwell-voeding
  • Gereedschapslade

2.

BIQU BX

De krachtige BIQU BX is niet alleen geschikt voor beginners, ook gevorderde gebruikers zullen zeker genieten van deze innovatieve 3D-printer.

Grote installatieruimte | Lichte Direct Drive Extruder | Automatische niveausensor

Met een bouwvolume van 250 x 250 x 250 mm kunnen met de BIQU BX grotere modellen worden gemaakt dan bijvoorbeeld met de Creality Ender 3 V2, die we zojuist hebben behandeld.

De BIQU BX verschilt ook van de Creality-printer in andere functies. De BX heeft een ultralichte direct drive extruder waaraan een ventilator en automatische nivelleringssensor zijn bevestigd.

Door zijn lage gewicht en een koppeloverbrengingsverhouding van 7:1 bereikt de extruder uitstekende printprestaties. De maximale extrudertemperatuur van de BX is 260°C, de maximale verwarmingsbedtemperatuur is 110°C.

Een van de grootste voordelen van de BIQU BX is de al genoemde automatische nivelleringssensor, die je verlost van de vervelende handmatige nivellering van het printbed. Het nivelleren is vaak een moeizaam proces, vooral in het begin, wat bij fouten kan leiden tot onbruikbare prints.

Dubbele Z-as | Glad binnenoppervlak van de nozzle

De dubbele Z-as structuur en het koolstofvezelachtige aluminium profiel garanderen robuustheid en stabiliteit. De 3D-printer kan ook in minder dan 10 minuten worden gemonteerd.

Een hoogwaardig messing mondstuk met een glad binnenoppervlak tot Ra0.4 zorgt voor een nauwkeurigere aanvoer en verwijdering van filament en voorkomt effectief verstopping.

Touchscreen | Krachtige CPU | Raspberry Pi | Octoprint

Een 32-Bit-Smart-Control-Card garandeert snelle rekenkracht en slimme assistent-functies zoals automatische nivellering.

Het 7 inch touchscreen met 3 bedieningsmodi is in 15 talen te bedienen. Een ingenieus BTT-moederbord ondersteunt de plug & play firmware-uitbreiding van Raspberry Pi. Benodigde onderdelen en het aansluitbord zijn goed geïntegreerd voor de integratie van de Raspberry Pi en zijn compatibel met RPi3 en RPi4.
De BIQU BX is ook de eerste 3D-printer met een geïntegreerde Octoprint

Kenmerken van de BIQU BX in één oogopslag

  • 250 x 250 x 250 mm bouwruimte
  • Direct-Drive-Extruder
  • Enkele extruder
  • Max. extrudertemperatuur: 270 ºC
  • Max. Verwarmingsbedtemperatuur: 140 ℃
  • Snelle montage
  • Zeer gebruiksvriendelijk
  • Dubbele Z-as structuur
  • Automatische bednivellering
  • 7 ” touchscreen
  • 32-bits slimme controlekaart
  • BTT-moederbord
  • Gladde binnenkant van de mondstuk
  • Raspberry Pi-integratie
  • Geïntegreerde octoprint
  • USB- en SD-kaartinterface

3. Artillery Sidewinder X1

De Artillery Sidewinder X1 overtuigt met het grootste bouwvolume van onze top 5. De grote inbouwruimte in combinatie met andere geweldige features en een lage prijs maken de 3D-printer tot een van de meest populaire 3D-printers op de markt en een zeer goed instapmodel apparaat.

Grote installatieruimte | Snel verwarmingsbed | Dubbele Z-as

Dankzij de inbouwruimte van 300 x 300 x 400 mm van de Sidewinder X1 kunnen grotere modellen worden geprint. Het luchtdoorlatende en keramisch gecoate glasprintplatform biedt een uitstekende hechting en gemakkelijke drukverwijdering zodra het verwarmingsbed afkoelt.

Het verwarmingsbed van de Sidewinder X1 zorgt ervoor dat andere printers er oud uitzien - het warmt in ongeveer 45 seconden op van kamertemperatuur tot 60 °C. De maximale verwarmingsbedtemperatuur is 130 °C.
Een dubbele Z-as zorgt voor synchrone bewegingen en hoge printprecisie.

Direct Drive Extruder

De Artillery Sidewinder X1 heeft een direct drive extruder met een maximale temperatuur van 260 °C, die ook geschikt is voor het printen van flexibelere filamenten. Dit is een voordeel ten opzichte van veel andere printers in het instapsegment.

Wil je weten wat precies het verschil is tussen een direct drive en een Bowden-extruder? In ons artikel “Direct-Drive-Extruder vs. Bowden-Extruder” kom je alle voor- en nadelen van beide soorten extruders te weten.

Touchscreen | Filamentsensor | Resume Print

Op een 3,5 inch kleuren touchscreen kun je het printproces altijd monitoren en besturen. De gebruikersinterface is gemakkelijk te gebruiken, zelfs voor beginners. Een filamentsensor laat je ook zien wanneer het filament bijna op is.

Ook fijn: als het filament op is, blijft het printbed verwarmd om het printen niet in gevaar te brengen en er later probleemloos mee verder te gaan.
In het geval van een stroomstoring kan het printen worden hervat vanaf het punt waar het werd onderbroken dankzij de Resume Print-functie.

Kenmerken van de Artillery Sidewinder X1 in één oogopslag

  • 300 x 300 x 400 mm inbouwruimte
  • Direct drive extruder (max. temperatuur 260 ° C)
  • Snel verwarmbaar (max. 130°C)
  • Dubbele Z-as
  • Voorgemonteerd
  • Keramisch gecoat glazen platform
  • Afdrukfunctie hervatten
  • Erg stil
  • Makkelijk in gebruik
  • Kleurenaanraakscherm
  • Snelle inbedrijfstelling
  • Filamentsensor
  • Interfaces: USB, SD-kaart

4.

Voxelab Aquila

De Voxelab Aquila is een zeer goedkope 3D-printer die ideaal is voor beginners.
Ondanks zijn lage prijs is de 3D-printer uitgerust met een relatief groot bouwvolume van 220 x 220 x 250 mm en heeft hij een robuust volledig metalen frame.

Modulaire opbouw | Gestructureerd ontwerp

De montage van de Voxelab Aquila is kinderspel. De 3D-printer wordt gedeeltelijk gemonteerd geleverd, dankzij de modulaire opbouw is deze snel in elkaar te zetten en kun je tijdens de montage meer te weten komen over de basisconstructie van het apparaat.
De kabelboom is verborgen, wat veiligheidsrisico's vermijdt en het onderhoud vereenvoudigt.

Bowden-extruder | Koolstofkristal silicium glasplaat

De Aquila 3D printer is voorzien van een Bowden extruder, de maximale printtemperatuur is 250 °C.
Een koolstof-kristal-silicium-glasplaat garandeert een uitstekende hechting aan het drukbed en minimaliseert het risico op kromtrekken. Het verwarmingsbed kan in minder dan 5 minuten worden opgewarmd tot 100°C (maximale temperatuur).

V-profiel rolgeleiders

V-profiel rolgeleiders zorgen voor gelijkmatige en soepele bewegingen, een lage geluidsontwikkeling en een hoge slijtvastheid.

Resume Print | Kleurenscherm

Bij stroomuitval schakelt de Voxelab Aquila in de pauzemodus. Het afdrukken kan dan worden hervat vanaf het punt waar het werd onderbroken.

De 3D-printer kan eenvoudig worden genavigeerd met behulp van een draaiknop op een 3,5-inch kleurendisplay met een aantrekkelijke gebruikersinterface.

Kenmerken van de Voxelab Aquila in één oogopslag

  • Bowden-extruder
  • 220 x 220 x 250 mm bouwvolume
  • Modulaire constructie
  • Volledig metalen frame
  • 250 °C max. afdruktemperatuur
  • 100 °C max. bedtemperatuur
  • Koolstofkristal silicium glasplaat
  • Makkelijk in gebruik
  • 3,5 ” touchscreen
  • Resume Print-functie

5.

Anycubic Mega Zero 2.0

De Anycubic Mega Zero 2.0 is de herziene opvolger van de Anycubic Mega Zero en de goedkoopste van onze geselecteerde instapmodel 3D-printers.
Door de modulaire opbouw van het apparaat is de 3D-printer snel en eenvoudig in elkaar te zetten en klaar voor gebruik.

Magnetisch printbed | Double-Gear-Extruder

Met 220 x 220 x 250 mm behoudt de Mega Zero 2.0 hetzelfde bouwvolume als zijn voorganger. In tegenstelling tot de Mega Zero is de Mega Zero 2.0 voorzien van een verwarmbaar printbed dat opgewarmd kan worden tot 110 °C. Je bent dus niet alleen gerust als het gaat om de hechting van het printbed, er kunnen dankzij het verwarmde printplatform ook meer filamenttypes worden geprint.

Het filament wordt verwerkt door een Double-Gear-Extruder, die een sterke koppel heeft en dus een zachte extrusie mogelijk maakt. De maximale printtemperatuur is 255 °C.

Praktisch is ook de flexibele magnetische drukplaat, die kan worden verwijderd. Dankzij het gestructureerde oppervlak zorgt het voor een goede hechting en gemakkelijk losmaken van het model na het printproces.

Resume Print

Bij een onverwachte stroomstoring kan het printen gewoon worden hervat.

Kenmerken van de Anycubic Mega Zero 2.0 in één oogopslag

  • Bowden-extruder
  • Modulaire constructie
  • 220 x 220 x 250 mm bouwvolume
  • Verwarmingsbed tot 110 °C
  • Double-Gear-Extruder
  • Maximale afdruktemperatuur: 255 °C
  • Flexibele magnetische drukplaat
  • Resume Print

3D food printer from Moscow scientists prints chocolate, cakes and even nuggets

A 3D food printer with a system of "smart" recipes that prints food products with specified properties was created by scientists from the Moscow State University of Food Production (MGUPP). The new device consists of 99% domestic components and can be used to design vending machines that print products according to the client's order. The 3D printer already prints with dough and chocolate, and in the future it will be able to produce even meat products - nuggets, for example, have already been successfully obtained. nine0003


chocolate chess

One of the goals of developing a 3D food printer was to create food rich in vitamins, micronutrients and antioxidants that would be a healthy alternative to traditional meals.

“Today, many are deficient in nutrients and micronutrients that can be replenished with elements in chemical form, but eating foods fortified with them contributes to their better absorption. The main goal of creating a food printer was the ability to produce personalized functional products using a system of "smart" recipes, which will be like instructions for the printer," says Aleksey Kuchumov, Vice-Rector for Research and Development of MGUPP. nine0003

The main difference between the development of MGUPP scientists and existing 3D printers is the units modified for the tasks of the food industry. The unique technology allows you to take a device for printing with plastic and upgrade it for printing with food raw materials.

“We made one unique extruder (a nozzle through which the raw material exits) of a revolving type. Inside it is a drum into which various raw materials are fed, which allows you to speed up the production process and use fewer parts. This is also our innovation - the use of one powerful drum extruder, into which various raw materials are fed under different pressures and temperatures, ”notes Alexey Kuchumov. nine0003

The development of MGUPP scientists allows you to make a 3D printer of any size and for any task, as well as increase the print area to one and a half meters, which is 1.2 meters more than existing analogues.


3D printer

In addition, the new device provides the ability to produce artificial meat using bioprinting technology. At the same time, the printer performs the function of a freezer - a refrigerator, and with different setting temperatures. It is designed in such a way that the necessary climatic environment will be formed for each type of raw material: its own temperature, its own humidity, etc. Among other things, a laboratory for the production of “cultured” meat is being opened together with 3D Bioprinting Solutions. nine0003

“The bioprinter prints a special plant-based substrate, on which live cells taken painlessly from animals are applied. This device prints according to a given digital model, using special nozzles - devices that allow you to print both cellular material and plant fibers. Such meat can be called “ethical”, and it will be in demand on the market,” comments Alexey Kuchumov.

As 3D Bioprinting Solutions Managing Partner Yousef Hesuani, 3D Bioprinting Solutions Managing Partner, added: “At this stage, it is possible to obtain the structure and organoleptic properties of the product similar to a natural product. The technology of printing with plant fibers followed by the application of a cell culture to the printed fibers has been developed, and special food bioprinters have been developed that allow automating the printing process. For example, the nuggets obtained using this technology were prepared according to a special recipe.” nine0003

Today, the MGUPP 3D-farm operates continuously, students and graduate students independently assemble printers and debug printing with food raw materials and living cells. The development is carried out within the framework of the MGUPP strategic project "Additive Technologies and Ingredients of the FoodNet Market" under the program of the Russian Ministry of Education and Science "Priority 2030" within the framework of the national project "Science and Universities".

Clay 3D printer Most likely, you will think about plastic. Someone might have heard about metal powders, gypsum, wax... It was a discovery for me that clay can be used for 3D printing. nine0003

1617 views

In fact, this is not a new invention, more than one company is engaged in the production of 3D printers for printing from clay. Here I want to talk about the Cerambot Eazao printer from Cerambot. I found this project on the Kickstarter crowdfunding platform.

Retrieved from https://www.kickstarter.com/

Why clay?

Clay is an environmentally friendly, affordable and affordable material. Sculptures, pots, dishes are made from it. Unlike plastic, clay does not pollute the environment and is safe for health. Clay products are easy to recycle and reuse, just soak the product in water. nine0003

In order for the printed product to be of good quality, it is important to achieve the correct consistency when kneading the clay. Clay should be elastic, not too hard and not too soft. It should not stick to your hands and crack when squeezed.

Source https://cute4home.ru

About the printer

Cerambot Eazao is designed for home use. It comes pre-assembled, so it's ready to go right out of the box. All you need to do is fill the cartridge with clay and start printing. nine0003

Retrieved from https://www.kickstarter.com/

The maximum printing speed of Cerambot Eazao is 40 mm/s. The thickness of the layers is set by different nozzles and varies from 0.8 to 2 mm. After printing, the clay remains soft and pliable for some time, so you can correct the shape of the product and eliminate imperfections.

This is the second model of a 3D printer from Cerambot. The first project raised $286,000 on Kickstarter from 1,000 sponsors.

In the second model, the developers took into account the wishes of users, improved their product and added a clay kiln to the kit. nine0003

The oven allows firing products at high temperatures at home without the use of specialized ovens. It consists of a heat-resistant heat-insulating material - ceramic fiber and a high-temperature absorbing material - silicon carbide. Inside there is a cavity for the finished product.

Retrieved from https://www.eazao.

Learn more