Ender 3 3d printer bed size

The Ender 3 (V2 / Pro) Bed Size vs Print Area Explained – Clever Creations

Creality’s Ender 3 3D printers are well-known for providing excellent value for money in the budget 3D printer segment. They offer a sturdy metal frame and a decent feature set that delivers excellent print quality. Their print volume also rivals that of more expensive 3D printers in the market.

And it is this build volume that causes confusion for new 3D printer buyers and beginners in the field. Creality lists the Ender 3 bed size as 235 x 235 mm, yet the actual printing area is just 220 x 220 mm.

Why is there a difference between the two values? In this article, we’ll explore the Ender 3’s build volume and bed size in detail, and look at why Creality chose to reduce the usable build area.

Ender 3 Dimensions

The dimensions of a 3D printer are one of the essential things that you need to look out for. With Creality Ender 3, there are three main dimensions that we need to look at. These are the total size of the 3D printer, its bed size, and the print volume.

The Creality Ender 3 is a relatively compact 3D printer due to its open-frame design. The overall footprint of the 3D printer is 440 x 410 mm, which makes it small enough to fit on most desks while still leaving a good amount of space around it. Almost half of it is taken up by the external components and the structure, and the other half is used for the print volume.

In contrast, the print volume is the actual usable space you get for 3D printing. The Ender 3 has a print volume of 220 x 220 x 250 mm, and it means that the Ender 3 can print any object with a length, width, and height equal to or less than those dimensions.

Image: MEGABITS via Reddit

A visual interpretation of the Ender 3’s build volume

When it comes to the Ender 3 bed size, Creality has it listed as a rectangular bed with a size of 235 x 235 mm. This indicates that the actual bed size of the Ender 3 is actually 15 mm greater than its print area on both the X-axis and Y-axis. And this is where the confusion occurs. Why would Creality reduce the print area on this 3D printer when there is still enough space left on the printing bed?

Difference Between Ender 3 Bed Size and Print Area

Now that we’ve looked at the difference between the print bed size and the print area, let’s understand why you get a smaller printing area.

If you do the math, you will notice that the 220 x 220 mm build area is 12% smaller than what you would get if you would utilize the entire 235 x 235 mm print bed. This reduction in the build area is made to accommodate for two things – the binder clips and the Ender 3’s mechanical tolerances.

Image: Whambam Systems

The Ender 3 bed size vs print area

Aside from the Ender 3 Pro, both the original Ender 3 and the V2 use a non-magnetic print bed. To keep the bed in its place, Creality uses a set of binder clips on the edges of the print bed. These clips take up some of the usable print area of the bed, and hence you can see a decrease of 7. 5 mm on each edge of the printing bed.

Another reason for reducing the print area is to account for the tolerances of the Ender 3’s mechanical components. It consists of many parts. Some of these are stationary, like the aluminum extrusion, and some move around, like its extruder and mechanical joints. Each piece has its tolerance limits, which the manufacturer sets.

For example, there might be some error during the manufacturing of the V-slot extrusions, belts, or switches. The spring tension of the end switches on the X and Y axes might get loose after a while. The same goes for the loosening of bolts and joints in the printer’s frame over time.

When you add all of these values, you get a ‘stack up tolerance’ that accounts for all the tolerances in the assembly. In the case of the Ender 3, Creality decided that a value of 15 mm on each axis will be enough to account for these and ensure that you can easily 3D print without running into any problems.

How to Increase the Print Area of the Ender 3

We’ve now understood the underlying reason behind the bed size and the print area difference. While the reduced print area might not be a big deal, what if you want to print 3D models that fit the entire printing bed?

As mentioned earlier, one reason for a smaller print area is the binder clips typically used for printing beds. The easiest solution is to replace the big-sized binder clips with smaller ones, and it’ll help you free up some space on the edges, thus increasing the effective printing volume.

An even better way to increase the print area is to skip the binder clips entirely and instead use a magnetic bed. With a magnetic print surface, you get to use the entire bed for 3D printing and have the added benefit of easy print removal associated with magnetic print beds.

Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel...

Check Price

Aside from upgrading the heated bed, there are many other ways in which you can upgrade your Ender 3. Be sure to check out our article with the best options.

Recommended:

The Best Ender 3 (V2 / Pro) Upgrades

If you prefer to increase the entire printing volume of the Ender 3, you can modify your printer setup using an Ender Extender kit. These are specifically designed for the Ender 3 and allow you to increase the overall printing volume by extending the print bed and the printer size of the 3D printer.

Once you’ve chosen your preferred method for extending the Ender 3 bed size, all that’s left is to tweak the settings in the firmware. You’ll have to modify the Ender 3’s new printing volume in the firmware and upload it to the 3D printer. To be on the safe side, instead of inputting the edge-to-edge value of the printing bed, it is wide to leave at least a 5 mm tolerance on each axis.

Other Useful Ender 3 Upgrades

While the above solutions will directly affect your printing bed size, there are other valuable upgrades that you can install to enhance your 3D printing experience with the Creality Ender 3. Here are some of our top picks.

Ender 3 Enclosure

The Ender 3 is an open-frame design and does not have a built-in enclosure. Understandable, given its low price-point. However, having an enclosed 3D printer can be useful for various reasons.

For example, not having an enclosure limits you from 3D printing ABS and PETG due to its warping nature. Additionally, you will run into 3D printer fumes that are released during the filament extrusion process. These can be toxic and not friendly to use in a home environment.

Creality’s official Ender 3 enclosure is designed to cover your 3D printer from all sides and isolate it from the external environment. It thus protects the Ender 3 from any dirt, dust, keeps any fumes inside, and provides a printing space with a stable temperature. The enclosure has a clear window on the front for monitoring prints, and the enclosure material is flame retardant to keep you safe in case of a problem with your printer.

Creality Ender Enclosure for 3D Printer, Fireproof Dustproof 3D...

Check Price

Another option is to build a DIY 3D printer enclosure. While these take more time and effort to create, they are fully customizable to your needs.

BLTouch Auto-leveling Sensor

Image: Cerkit

A leveling sensor like the BLTouch is a must-have for any Ender 3D printer

The Creality Ender 3 does not come with an automatic bed leveling setup, and it can get tiresome to level the printing bed manually. To resolve it, you can install a BLtouch auto-leveling sensor. It probes the bed before printing and lets your 3D printer make micro-adjustments to adjust for misalignments in the printing bed. Perfect first layers every time!

Recommended:

What is a BLTouch Sensor and How to Use It

Official Creality BL Touch V3.1 New Upgraded 3D Printer Auto Bed...

Check Price

Silent Motherboard

Older Ender 3 3D printers come with V4.2.2 3D printer controller boards, which either have TMC 2208 or HR4988 stepper motor drivers. These drivers are fairly outdated and more importantly, cause your stepper motors to be very noisy.

To dial down the stepper motor noise and improve the performance of the 3D printer, you can upgrade your Ender 3 with a V4.2.7 motherboard.

It is a 32- bit silent motherboard with the TMC2225 stepper drivers. It lets you print entirely in silence and gives you the option to upgrade to Marlin 2.0 if you want to.

Creality Original Motherboard Silent 32-Bit V4. 2.7 with TMC2225...

73 Reviews

Check Price

Alternative 3D Printers to the Ender 3 With a Larger Print Bed

Ender 5 Plus

The Ender 5 Plus 3D printer is a bigger version of the original Ender 5, and it comes in a cube-shaped design with a printing bed that moves vertically on the Z-axis. The highlighting factor of the Ender 5 Plus is its giant build volume. It has a total printing volume of 350 x 350 x 400 mm, giving you enough space to 3D print a full-sized helmet.

It comes with a pre-installed BLTouch leveling sensor that helps you to get an excellent first layer on its massive printing bed. Creality has installed a dual-z-axis setup with two leadscrews and four linear rods in the printer frame to support its vast print bed size.

If you want to get a larger Creality 3D printer to 3D print truly big objects, the Ender 5 Plus is a great upgrade from the Ender 3. Given its low price, it is not perfect, but there are plenty of Ender 5 upgrades you can install to remove its shortcomings.

Official Creality Ender 5 Plus 3D Printer with BL Touch Auto-Leveling,...

Check Price

Creality CR-10S

The Creality CR-10 series of 3D printers is designed to target users who need a large 3D printer with a small footprint. In many ways, the design of the CR-10S is similar to the Ender 3, except for its massive printing volume of 300 x 300 x 400 mm and a separate power supply and control unit.

Other than that, the CR-10S comes with dual z-axis set up to support the large X-axis beam and a glass print bed for glossy first layers of your 3D prints. Compared to the Ender 3, the CR-10 S does take up quite a bit of extra space on your desktop, measuring 640 x 530 mm.

Creality CR-10S Pro V2 3D Printer, Upgrade Creality CR-10 with BL...

Check Price

Frequently Asked Questions

How big is the Ender 3 print area?

The X-axis and Y-axis on the Ender 3 both measure 220 mm. Its total stock print area is 220 x 220 mm.

What kind of filament does the Ender 3 use?

In its stock configuration, Ender 3 can use PLA, ABS, and PETG. For TPU you will need to make some modifications to the 3D printer. For more information, you can check out our recommendation for the best Ender 3 filaments.

Recommended:

The Best Filaments for the Ender 3

How much does the Ender 3 weigh?

The Ender 3 weighs 7.72 kg, which is about 17 lbs. It’s a relatively lightweight 3D printer that’s easy to move around, making it perfect for small spaces.

What is the warranty on the Ender 3?

Creality offers a one-year warranty on their Ender 3 model. This means that if any parts of your printer break or stop working properly within the first year, you can contact Creality and they will send you replacement parts for free. However, this does not include damage caused by user error. So be sure to read the manual carefully and follow all safety instructions to avoid voiding your warranty.

What is the print volume of Ender 3 Pro?

The print volume of the Ender 3 Pro is 220 x 220 x 235 mm. This printer offers a good printing size for many different projects. It has a high printing quality, and it is perfect for people who are looking for an affordable 3D printer.

How big is the build plate of the Ender 3 V2?

The Ender 3 V2 has a glass build plate with a print bed size of 235 x 235 mm. This is the same size as the Ender 3’s build plate, so you can use the same models and templates for printing. The printer also has a vertical resolution of 100 microns, so you can create detailed prints with ease.

What size table do I need for the Ender 3?

The Ender 3 has a footprint of 440 x 410 mm, so you will need a 3D printer table that is at least this size. If you want to be able to move the 3D printer around on the table, you may want to consider a table that is larger.

Recommended:

The 10 Best 3D Printer Tables and Workbenches

What is the size of the Ender 3 nozzle?

The stock Ender 3 nozzle size is 0.4mm. This is a standard size for 3D printers and is suitable for most printing applications. If you need to print with finer detail, you can purchase a smaller nozzle size (such as 0. 2mm) and install it on the printer.

Conclusion

Creality’s Ender 3 series remains one of the top budget 3D printers and provides excellent value for money for users of all categories. While it comes with a print bed with a size of 235 x 235 mm, the actual printing area of the bed is just 220 x 220 mm.

This marginal reduction in the print size is made to account for the stack-up tolerances of the Ender 3 assembly. You can choose to increase the default printing area by installing smaller binder clips or a magnetic build surface; however, this marginal increase in the printing volume might not make much of a difference in your actual 3D printing experience.

Let us know your thoughts on the Ender 3 bed size, does a difference of 15 mm on both sides of the print area matter much to you? Leave a comment below.

Recommended:

Creality Ender 3 V2 Neo Review: A Welcome Refresh

Ender 3 (V2 & Pro) Bed Size & Print Volume – Correct Values

Author
Recent Posts

Martin

Martin has a M. Sc. in physics and has gained many years of experience in industry as a lab manager and quality assurance manager. He has now tested dozens of 3D printers and is happy to share the collected experience with each new article.

What is a Printing Bed?

The printing bed is one of the most important components of a 3D printer. Your 3D object is created on the printing bed. There it is applied layer by layer. There are printing beds that stand still and some that move up and down or back and forth.

It is important that the printing bed is of high enough quality to hold the filament firmly in place. If the filament slips when hitting the printing bed, the 3D print will fail or it will warp and look unattractive.

At the same time, the printing bed has to be constructed in such a way that the 3D print can be removed from the bed after completion. You will achieve particularly good results with a heatable printing bed.

Luckily, most printing beds are interchangeable and you can use a better one in your 3D printer if you are having trouble with yours. The Creality Ender 3 has a good printing bed, though. The included printing bed is made of glass and works quite well for the start.

What Do the Measurements Mean?

With all the 3D printers available on the market, it is a bit complicated to read and understand all the size and dimensional information. The 3D printer Creality Ender 3 is built extra compact.

Nevertheless, the manufacturers also wanted to offer a satisfactory printing surface. This should satisfy more customers. Because some only want to print small models, others also want to print large ones.

There are rather few 3D printers on the market that are really designed for large prints. However, there are some tricks that can help you to print a larger object even with a small print volume.

The construction volume of the Creality Ender 3 is (just) 220 × 220 × 250 mm. With this size it will certainly not win any price. Nevertheless, it is optimally designed for small 3D prints.

With its small overall size of 440 × 410 × 465 mm, which should never be confused with the building volume when reading the measurements, it fits anywhere on your desk and you don’t need to make a lot of room for the 3D printer.

The area of the printing bed is 235 × 235 mm. This makes you wonder why only a construction volume of 220 × 220 × 250 mm is given, doesn’t it? Are 15 mm misappropriated by the manufacturer or how does this figure come about? We will explain it to you below. Now let’s summarize again briefly:

Creality Ender 3 Dimensions

Printing volume: 220 × 220 × 250 mm
Printing bed size: 235 × 235 mm
Size of the device: 440 × 410 × 465 mm

Why is 14% of the Bed Size Misappropriated?

In total, Creality thus states 14 % less print volume than the size of the printing bed could provide. The Ender 3 is guided by mechanical joints.

These do not always work 100% accurately.

Therefore, tolerances must be included when calculating the print volume. In order to achieve perfect prints, a certain number of tolerances are calculated and specified depending on the manufacturer.

In addition, it always depends on the printing bed itself. The supplied printing bed is fixed with binder clips. These require a large amount of play. Binder clips are not the best way to achieve a perfect 3D print.

But even there, there are ways to make the printing process easier and more efficient with a few small steps.

Can I Exceed the Printing Volume?

The truth is that you can easily exceed the size of your specified printing volume. There is no reason at all why you should not!

There are some 3D printing experts who have even pushed the print volume to 235 × 235 × 250. However, we would not recommend this to you as a beginner. The manufacturer Creality has decided that 220 × 220 × 250 mm is exactly the right print size for the Ender 3 3D printer.

3D printers require a tolerance margin, as the prints can always deviate slightly. The printing bed can also be shifted by a few millimeters, for example after cleaning. The manufacturer has taken this into account in its specifications in order to guarantee the best possible printing result.

But that doesn’t mean you can’t print bigger. A margin of 5 mm on each side should be perfectly adequate. You do not need 15 mm. So you gain 10 mm and get an area of 230 × 230 × 250 mm – after all.

If you like to experiment a little bit with your 3D printer and don’t mind possibly producing a few failed prints and cleaning your 3D printer several times, then you can of course go even closer to the 235 × 235 × 250 mm.

Surely it can also be a lot of fun to deal with, research and play with your new device in this way.

What Can I Change to Increase the Printing Volume?

Surely it annoys you, like most other users, that you cannot use so much of your installation space. But there are a few simple solutions for this:

Replace the clips
Replace the printing bed
Modify the firmware

Instead of using the supplied binder clips on the Creality Ender 3, you can simply replace them. Don’t even bother with them, just replace them directly.

For this you exchange the binder clips for those with a smaller profile. Best are those that you can also find behind picture frames.

These springs are the perfect mount for your Ender 3, they lock much better and are guaranteed to hold their position. It will certainly be a relief for you when the bulky binder clips are gone.

Here* you can watch such clips on Amazon.

But you can also replace the printing bed. From Creality there is a magnetic printing bed*. This fits perfectly on the surface of the Ender 3 because it was specially designed by the manufacturer.

Magnetic Printing Bed for the Ender 3*

This also makes it much easier to remove your printed object from the printing bed. But keep in mind that magnetic printing beds wear out very strongly from 60 °C. They are therefore not suitable for ABS* filament.

Now you have to reprogram your 3D printer. Because its software is programmed to the manufacturer’s specified dimensions. For this purpose, you update the firmware of the mainboard. There you simply set the new dimensions.

Upgrading the Creality Ender 3

There are a lot of variants to upgrade the Ender 3. Many different printing bed variants are now available on the market.

This includes, for example, a printing bed made of polypropylene*. Filaments such as ABS* and PLA* adhere better to it during printing. Once the printing bed has cooled down, the objects can be removed from the printing bed very easily.

Polypropylene also has the advantage that it is easier to clean. You can fix the printing bed with clamps or simply with adhesive tape.

Another possibility to exchange the printing bed is a printing bed made of hardened glass*. It is fixed with clamps.

Thanks to a silicone and carbon coating, the prints on this bed will hold perfectly. No slipping and therefore no distortion. The printing bed is especially suitable if you want to print with ABS. This printing bed is extremely heat-resistant and therefore suitable for all common types of filament.

We have already mentioned the magnetic, removable printing bed* above. It can be easily bent after printing, so you can easily remove the object from the printing bed. However, the prints will hold better on the glass or polypropylene bed.

Many other components can be exchanged and upgraded at Ender 3. This includes the hotend, for example. But you can also add components.

A nice special is the laser engraver*. With it, you can really enhance your 3D prints. Don’t you want to engrave your name on the objects? Or create a very personal gift with your printer?

If you want to better protect your device, you can purchase a case for the Creality Ender 3*. This protects it from dirt and dust.

Ender 3 Case/Enclosure*

It has a viewing window in the front area so that you can still easily observe your printer. Your printer is well protected while you still have full control over your 3D printing.

According to the manufacturer, the housing is even fireproof and does not allow fire to penetrate to the outside. Let’s hope you never need this feature.

Of course, the mainboard can also be exchanged* or extended. Creality also sells new updates on a regular basis to enhance your 3D printer. The installation is very easy and can be used by everyone. You don’t need to know much about it.

So you can see that with a Creality Ender 3 you have all possibilities. There are many more small upgrades that you will surely get to know bit by bit through the platforms once you have bought an Ender 3. It is worthwhile to check these platforms, again and again, to not miss important and practical upgrades:

3DJake*
3DPrintersBay*

Perfect Use of Space

The Creality Ender 3 offers a nice print volume compared to other 3D printers for its small dimensions of 440 × 410 × 465 mm. The 3D printer fits perfectly on every desk.

Compared to other devices, it is lightweight and therefore easier to transport. So if you want to move it a bit, it is not a big deal. Of course, it is always a personal question if you like the look of the Creality Ender 3.

The obvious spool holder is not for everyone. However, the Ender 3 offers a lot of advantages, which may make you forget the optics.

Fortunately, you can also replace the spool holder if it bothers you. If the attached spool holder at ender 3 is too steep for you, you can replace it with an external spool holder. However, this will make your 3D printer bigger, as the external spool holder is attached to the side.

Comparable 3D Printers

If the Creality Ender 3 does not suit you one hundred percent, there are of course comparable devices that come close to its construction volume. These include the Prusa i3 MK3S *, the Anycubic i3 Mega* and the Creality Ender 5*.

Prusa i3 MK3S

The Prusa i3 MK3S 3D printer* offers a construction volume of 250 × 210 × 200 mm. It is very similar to the Creality Ender 3, both in construction and handling. It is even more popular than our test model, but is also considerably more expensive.

Prusa i3 MK3S 3D printer*

For beginners, the Ender 3 is completely sufficient. However, the Prusa i3 MK3S can be warmly recommended as a follow-up model.

Anycubic i3 Mega

The Anycubic i3 Mega 3D Printer* has a construction volume of 210 × 210 × 205 mm. It is also a very good 3D printer that costs little and is easy to use.

Anycubic i3 Mega 3D Printer*

However, it is significantly lower than the other 3D printers presented. Therefore it is of course not suitable for high objects.

Creality Ender 5

The Creality Ender 5 3D printer* has a construction volume of 220 × 220 × 300 mm. With this, high objects can be printed very well. With 300 mm it has a very nice size, which is rarely found in the price range.

Creality Ender 5 3D printer*

Compared to the Ender 3, it still has the advantage that it is somewhat more robustly built than its brother.

Disclosure: This website is the property of Martin Lütkemeyer and is operated by Martin Lütkemeyer. Martin Lütkemeyer is a member of the Amazon Services LLC and other Affiliate Programs. These are affiliate advertising programs designed to enable websites to earn advertising revenue through advertising and linking to Amazon.com and others. Links marked with * are affiliate links.

Ender 3 Ultimate Bed Level Free STL File・Design for Download and 3D Printing・Cults

CR-10 Ultimate Bed Leveller

Free

Embossed/Debosted Ender Storage Box + Step File

Free

Another Bloody Ender 3v2 Tool Holder

Free

nine0003 Multicolor Owl Lights for NeoPixel Lights

Free

# Filament runout sensor mounting

Free

Silica gel holder for small beads

Free

ESP32 D1 Mini Development Board Case Click Shut WEMOS + STEPS File

Free

nine0003 Ender 3 V2 Electronic Expansion Unit Mainborad Silent fans (v1)

Free

The best files for 3D printers in the Tools category

Vasecube - calibration cube/purge nozzle

Free

derSchraederFlatter - Tire deflator for Schraeder valves

Free

nine0003 T-RIG Tablet RIG

Free

Prusa Gears Knob

Free

Windows Hourglass Cursor Extruder Visualizer

Free

Paint Mixer

Free

Lumix lens mount replacement 14-42

0,94 €

nine0003 Ultimaker 2 temperature torture calibration test

Free

Bestsellers in the Tools category

Spartan pen holder

1,80 €

PET-Machine, make your own plastic bottle filament at home!

15 €

ENDER 3 S1/PRO SPRITE, V3 AIR DUCT 5015 OR 4020, LED strip

~~€2. 69~~ -twenty% 2.15 €

telephone ring holder

0,90 €

Quick Print Paint Bottle Rack (6 sizes)

2.86 €

SUPERBOX

1,50 €

nine0003 3D printed wave transmission (harmonic drive)

4.99 €

ARTEMIS -> Shop for Alligator 2 || 6.5" arrows || Repeating crossbow

6.25 €

Cut-Man - PET bottle cutter with handle!

€3.49

UNIVERSAL BED LEVELING INDICATOR FOR VERY ALL PRINTERS

2,81 €

PRECISE DIAL INDICATOR 3D PRINT DIY

1,90 €

Bambu AMS Stand for placement raised 2nd block behind

1. 13 €

Ender 3, 3 V2, 3 pro, 3 max, dual 40mm axial fan hot end duct / fang. CR-10, Micro Swiss direct drive and bowden compatible. No support required for printing

1.55 €

ENDER 3 S1/PRO SPRITE, HOTEND 4020 OR 5015 FAN PROBE NO Y OFFSET

~~€2.28~~ -twenty% 1.82 €

well designed: Hemera fan duct

2.50 €

Tool holder for 3D printer V3.0

1.04 €

Do you want to support Cults?

Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people, so supporting us in maintaining activities and creating future developments is very easy. Here are 4 solutions available to everyone:

AD: Disable your AdBlock banner blocker and click on our banner ads. nine0006
AFFILIATION: Shop online with our affiliate links here Amazon.
DONATIONS: If you want, you can donate via PayPal here.
* INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community!

Creality accepts orders for Ender-3 S1 Plus 9 FDM 3D printers0001

News

Subscribe to the author

Don't want

The Chinese company Creality has released another addition to the line of best-selling Ender-3 family - the Ender-3 S1 Plus 3D printer, a larger version of the Ender-3 released late last year S1 with direct extruder Sprite and automatic calibration.

The Ender-3 S1 FDM 3D printer is currently positioned as the flagship model in the Ender-3 budget line. The main difference between the new Ender-3 S1 Plus and the flagship lies in the increased construction area - 300x300x300 mm versus 220x220x270 mm. The novelty is offered in almost assembled form: the final assembly consists of only six steps. nine0006

Like the previous Ender-3 S1 and Ender-3 S1 Pro models, the new system is equipped with a lightweight Sprite geared direct extruder with two pinion gears, a ratio of 1:3.5 and a force of 80 N. The assembly weight does not exceed 210 grams. The use of a gearbox reduces the load on the motor and increases the smoothness of the material feed, while the installation of a feeder on the head (direct feed) makes it easier to work with flexible filaments compared to Bowden extruders. nine0006

The hot end reaches a maximum temperature of 260°C, allowing you to work with the most popular polymer materials, including PLA, ABS, PETG, thermoplastic polyurethane and others. 3D printing is carried out on a removable flexible table made of sheet steel with an adhesive polycarbonate coating. The table is attached to the heated platform with magnets.

The calibration system is also inherited from the Ender-3 S1: the 3D printer builds a sixteen-point grid of the stage surface using the CR-Touch optical sensor. Positioning on the Z axis is carried out using a synchronized double drive. nine0006

The electronics include a 32-bit board with quiet drivers providing no more than 50 dB noise, as well as a 4.3-inch color touch display. Additionally, a filament sensor and the function of saving and resuming workflows in case of an unplanned power outage are provided.

If desired, the 3D printer can be equipped with an optional laser engraving attachment, Wi-Fi Cloud Box 2.0 remote control system and LED lighting. nine0006

Ender-3 S1 Plus 3D Printer Specifications:

Construction area size: 300x300x300 mm
Number of extruders: 1
Extruder Type: Sprite geared direct extruder with double drive
Table: steel coated with polycarbonate
Nozzle diameter: 0.
Learn more

Ender 3 3d printer bed size

The Ender 3 (V2 / Pro) Bed Size vs Print Area Explained – Clever Creations

Ender 3 Dimensions

Difference Between Ender 3 Bed Size and Print Area

How to Increase the Print Area of the Ender 3

Other Useful Ender 3 Upgrades

Ender 3 Enclosure

BLTouch Auto-leveling Sensor

Silent Motherboard

Alternative 3D Printers to the Ender 3 With a Larger Print Bed

Ender 5 Plus

Creality CR-10S

Frequently Asked Questions

How big is the Ender 3 print area?

What kind of filament does the Ender 3 use?

How much does the Ender 3 weigh?

What is the warranty on the Ender 3?

What is the print volume of Ender 3 Pro?

How big is the build plate of the Ender 3 V2?

What size table do I need for the Ender 3?

What is the size of the Ender 3 nozzle?

Conclusion

Ender 3 (V2 & Pro) Bed Size & Print Volume – Correct Values

What is a Printing Bed?

What Do the Measurements Mean?

Creality Ender 3 Dimensions

Why is 14% of the Bed Size Misappropriated?

Can I Exceed the Printing Volume?

What Can I Change to Increase the Printing Volume?

Upgrading the Creality Ender 3

Perfect Use of Space

Comparable 3D Printers

Prusa i3 MK3S

Anycubic i3 Mega

Creality Ender 5

Ender 3 Ultimate Bed Level Free STL File・Design for Download and 3D Printing・Cults

CR-10 Ultimate Bed Leveller

Embossed/Debosted Ender Storage Box + Step File

Another Bloody Ender 3v2 Tool Holder

# Filament runout sensor mounting

Silica gel holder for small beads

ESP32 D1 Mini Development Board Case Click Shut WEMOS + STEPS File

The best files for 3D printers in the Tools category

Vasecube - calibration cube/purge nozzle

derSchraederFlatter - Tire deflator for Schraeder valves

Prusa Gears Knob

Windows Hourglass Cursor Extruder Visualizer

Paint Mixer

Lumix lens mount replacement 14-42

Bestsellers in the Tools category

Spartan pen holder

PET-Machine, make your own plastic bottle filament at home!

ENDER 3 S1/PRO SPRITE, V3 AIR DUCT 5015 OR 4020, LED strip

telephone ring holder

Quick Print Paint Bottle Rack (6 sizes)

SUPERBOX

ARTEMIS -> Shop for Alligator 2 || 6.5" arrows || Repeating crossbow

Cut-Man - PET bottle cutter with handle!

UNIVERSAL BED LEVELING INDICATOR FOR VERY ALL PRINTERS

PRECISE DIAL INDICATOR 3D PRINT DIY

Bambu AMS Stand for placement raised 2nd block behind

Ender 3, 3 V2, 3 pro, 3 max, dual 40mm axial fan hot end duct / fang. CR-10, Micro Swiss direct drive and bowden compatible. No support required for printing

ENDER 3 S1/PRO SPRITE, HOTEND 4020 OR 5015 FAN PROBE NO Y OFFSET

well designed: Hemera fan duct

Tool holder for 3D printer V3.0

Do you want to support Cults?

Creality accepts orders for Ender-3 S1 Plus 9 FDM 3D printers0001

Subscribe to the author

Learn more