Creality ld002r lcd resin 3d printer

Creality LD-002R 3D Printer | LD-002R 3D LCD Resin Printer

Home Collections [CA Warehouse Clearout]LD-002R LCD Resin 3D Printer

$ USD

2 Reviews Pricing Not Include Tax

Ship From

Canada

Resin

LD-002R

Ship to

It is expected to arrive within and will cost $ USD to ship

This item can't be shipped to this Country/Region

Bundles

Quantity

28 Available

Add To Cart Buy It Now

Continue To Shopping View Cart

People who bought this item also bought

LD-002R LCD Resin 3D Printer

BUILD AND MOTION: Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.

ANTI-ALIASING： MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.

QUICK LEVELING： Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.

PERFORATED PRINT PLATE： Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.

AIR FILTER： A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.

LD-002R LCD Resin 3D printer news

LD-002R LCD Resin 3D Printer high strength interpretation of ultra-high cost-effective configuration

LD-002R adopts the "LCD selective area light transmission principle" molding technology. The LD-002R 3D printer integrates many functional technologies in printing accuracy, printing speed, and product functions, and has nine high-end configurations, making the new LD-002R available for more market choices.

learn more

What are SLA, DLP, and LCD resin 3d printers? What are their molding principles and differences?

Regarding resin 3D printing, most people may only know the molding method of SLA,（Photo-curing: After being irradiated with light, a special photosensitive printing liquid is cured to become a 3D printed object. ） And most people will know that the market prices will come from 1,000 to 10,000 US dollars, even more, which is relatively expensive.

learn more

Download

Customer Reviews

Based on 2 reviews

50%

(1)

50%

(1)

Write A Review

Ask A Question

Reviews (2) Questions (0)

$ USD

ADD TO CART BUY IT NOW

Write a review

Ask a Question

Creality LD-002R Review: MSLA Resin 3D Printing on a Budget

Tom's Hardware Verdict

The Creality LD-002R offers solid print quality, but at painfully slow speeds.

Pros

+
+ Sturdy metal construction
+
+ Integrated carbon air filter
+
+ Solid print quality

Cons

-
Build platform arrived with scratches on it
-
Lackluster build speed
-
Built-in demo model takes over 19 hours to print

Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.

Today's best Creality LD-002R deals

No price information

Check Amazon

The smaller of the two printers in the Creality LD-002X family, the LD-002R is an MSLA resin 3D printer with a modest build volume, relatively slow build speeds, and a retail price coming in around a very-reasonable $199. The 2K, 5. 5-inch masking LCD gives the LD-002R an XY accuracy of .075mm while the 9 second exposure time per layer means this printer will spend more time printing than the best 3D printers in this price range.

Specifications

Machine Footprint	8.7" x 8.7" x 15.9" (22.1cm x 22.1cm x 40.3cm)
Build Volume	4.69" x 2.56" x 6.30" (119mm x 65mm x 160mm)
Resin	DLP Photopolymer Resin
UV Light	30W 405nm UV LED
Masking LCD Resolution	2560 x 1440
Masking LCD Size	5.5"
Interface	3.5" LCD Touchscreen
XY Axis Resolution	.075mm

Creality LD-002R: Included in the Box

(Image credit: Tom's Hardware)

The Creality LD-002R includes all of the mechanical components you need to get up and running, including the resin vat, the build platform, a USB drive, and a power cable. It also includes some basic tools and consumables like a set of Allen keys, a brush, an extra FEP film for the vat and a pair of scrapers for removing parts from the build platform.

I was surprised to see that the LD-002R didn’t ship with any nitrile gloves or a surgical face mask, which are included with similar MSLA resin printers like the Anycubic Photon Mono, Phrozen Sonic 4K, and the Elegoo Mars 2 Pro. It would be helpful if those items were highlighted in the listing as not being included. This is a minor point, but it’s worth noting you should order those items with the machine if you’re planning on using it the same day you unbox it.

(Image credit: Tom's Hardware)

The build platform that was included with our review unit, which we bought from Amazon, showed clear signs of use, including scratches on the surface, a small amount of uncured resin on the top, and some staining present all over the component. I cleaned it up with some isopropyl alcohol and was able to get it looking a bit better, but I wasn’t expecting the platform to arrive in a used state. The rest of the printer (LCD, Z-axis, etc.) all look brand-new and unused, so this may just have been an error in the packing process. We reached out to Creality customer service and marketing for comment and, after several days, received no response, also a bad sign.

(Image credit: Tom's Hardware)

Similar to most MSLA resin 3D printers, the Creality LD-002R consists of four primary components: a base, a lid, a resin vat, and a build platform. The base on the LD-002R is made from bent sheet metal and has a substantial feel to it and the 3.5-inch touchscreen LCD user interface is bright and responsive.

The UV-blocking lid is a bright orange color which I like due to how much visibility you have into the printer even while the lid is on. The resin vat features built-in thumbscrews that make it easy to remove and also has markers embossed on the back to show how full the vat is. Finally, the build platform has a four point leveling system, similar to the Anycubic Photon Mono or the Phrozen Sonic Mini 4K.

(Image credit: Tom's Hardware)

The Creality LD-002R uses a 5.5-inch, 2K masking LCD with a resolution of 2560 x 1440 pixels to block the light from the UV light source which gives the printer an XY resolution of .075mm. The actual per-layer cure time is a little confusing on this printer, with the website spec sheet recommending 4 seconds / layer, the manual recommending 6 seconds / layer, the included test model being set at 8 seconds / layer and the slicer settings programmed for 9 seconds / layer.

(Image credit: Tom's Hardware)

The Creality LD-002R features an active carbon air filtration unit on the top of the base, which pulls air through the filter and out through the exhaust of the printer. The air filter worked well during my testing, and removing the lid during printing made it clear how much air it was scrubbing. I didn’t see a lifespan for the filter listed in the manual, but it didn’t seem to lose any efficacy during my 45+ hours of testing.

(Image credit: Tom's Hardware)

The side of the printer has an access panel that can be removed to easily access the main controller board of the LD-002R. The wiring is clean and professional, and the plastic terminals for the fans, UV light source, and Z-axis motor have been epoxied into place to prevent them from coming loose during shipping or printing. I noticed the manual indicates an empty set of headers where a Wi-Fi module can be installed, but the Creality LD-002R ships without one.The potential to add a Wi-Fi module is a competitive advantage for this printer, but as of this review, Creality does not appear to offer this module for sale on their site.

Set Up of Creality LD-002R

I had the Creality LD-002R up and running in just under an hour, with a non-trivial amount of that time spent cleaning the build platform. This printer is a mechanically simple machine, so getting it up and running consists only of installing and leveling the build platform, installing and filling the vat, putting the cover on, and hitting ‘Print.’

Leveling the Build Platform on Creality LD-002R

(Image credit: Tom's Hardware)

The Creality LD-002R uses a bracket with four screws to calibrate and align the build platform so it sits parallel with the masking LCD and also has an offset to compensate for the thickness of the FEP film on the vat.

Interestingly enough, the manual included with the LD-002R indicates that the platform should be dropped directly onto the LCD, which can potentially crack or shatter the screen. While the included plastic LCD protector may offer a slight offset for the very first level, once it’s removed, you’ll still need to use a piece of paper between the sensitive LCD and the metal build platform.

Printing Safety with Creality LD-002R

(Image credit: Tom's Hardware)

The Creality LD-002R uses 405nm UV resin, a material that you need to handle safely when in an uncured state to avoid injury. The resin can be harmful when making contact with skin, so make sure to wear gloves when pouring, cleaning up, or handling uncured resin. I also make sure I’m wearing gloves when removing the build platform after a print, as the resin tends to pool on top of the platform and can drip off while the platform is being removed.

Make sure you use the Creality LD-002R in a well-ventilated room to minimize the danger from inhaling fumes. Any spills or uncured resin stuck to a surface should be cleaned using 99% Isopropyl Alcohol and the container for the resin should be kept closed and secured when not actively pouring material.

(Image credit: Tom's Hardware)

After filling the vat with Elegoo Clear Green Photopolymer Resin , I noticed a minor issue that could be frustrating to users looking to fully clean the printer after each print. When the build platform lowers into the vat, the resin level rises and climbs over both the platform as well as part of the bracket holding it in place. This means the screws on the inside of the bracket, which are difficult to reach, were soaked in resin and were difficult for me to clean, even with the bracket fully removed. In comparison, the Elegoo Mars 2 Pro has solved this problem by increasing the distance between the bracket and build platform, which was much easier for me to clean in comparison.

Printing the Included Test Print on the Creality LD-002R

(Image credit: Tom's Hardware)

The Creality LD-002R ships with a USB stick that contains a test print titled ‘Eiffel Tower 8s. ctb’. Opening this model in the included Chitubox software gave me an estimated build time of 16 hours and 57 minutes; this is a substantial time investment for a test print, especially one that uses only 10.6 grams of material.

I’m not a fan of test prints that exceed two or three hours. Ideally the print should be fast enough for you to be present and observe the machine to see how it works and quickly fix any issues that may pop up during your first print.

(Image credit: Tom's Hardware)

The Eiffel Tower model actually took 19 hours and 15 minutes to print out, which is far more time than I’m usually comfortable with for a first print. To give Creality credit, the model printed with no issues and the detail on the model was eye-poppingly crisp. However, I still think that a more reasonable technical demonstration makes sense for a first print, as a 19-hour failure could cause serious problems if the vat is punctured, the LCD is cracked, or other problems occur.

(Image credit: Tom's Hardware)

Despite the 19+ hour print time, I was impressed with the fine detail on the test model. The smallest feature (the rails surrounding the first level) measured around .15mm in thickness, which is right around twice the minimum XY resolution. Printing a complex lattice structure like this also highlights the rigidity of the motion system, as any play in the gantry or Z axis would show up as uneven or disconnected layers.

(Image credit: Tom's Hardware)

Preparing Files for Printing with Chitubox

(Image credit: Chitubox)

The Creality LD-002R uses the included Chitubox software for importing, preparing, and exporting files to the printer. Chitubox is a robust software that offers the ability to import a model, hollow the model, add drain holes, and more. Chitubox has a native profile for the Creality LD-002R built-in, which meant all I had to do was select “Creality LD-002R” from the configuration to get started.

(Image credit: Anycubic)

The profile provided by Creality has an exposure time of nine seconds, which means each layer of the print (after the bottom layers) receives nine seconds of UV exposure. Compared to the two-second exposure time of the Anycubic Photon Mono and similar Mono LCD printers, this translates to very long print times on tall parts. The lift and retract speed settings are also about one third of the speed of the Photon Mono, which also add to the total print time.

Printing with the Creality LD-002R

(Image credit: Chitubox)

The first model I printed was the Upper body of a giant, Klytios, a 2nd Century BC sculpture scanned and digitized by the Staten Museum for Kunst (National Museum of Denmark). This model has lots of fine detail visible on the face and hair, which makes it an ideal test model.

Layer Height	0.05 mm
Bottom Exposure Time	50 seconds
Exposure Time	9.0 seconds
Bottom Layer Count	10

I used the default resin profile included in Chitubox (CREALITY General-purpose resin for LCD) for this print, which has a nine second exposure time and a bottom exposure time of 50 seconds for the first 10 layers.

(Image credit: Tom's Hardware)

This bust printed in seven hours and eight minutes, almost a full hour longer than the original print estimate of six hours and 15 minutes. The raft that adheres to the build platform to anchor the supports printed was a little misaligned, and the second layer looked like it was offset slightly from the first. Despite this, the model itself printed without any visible defects and I was able to peel away the support material easily after rinsing the model.

(Image credit: Tom's Hardware)

The fine detail on the hair and beard of the model looks sharp and clear, and the only visible stepping is on the chest and nose of the model where the layers were parallel with the build platform. Overall, the level of detail on this model is what I would expect from a 2K LCD on an MSLA resin 3D printer, but it doesn’t quite have the same high resolution as the Phrozen Sonic Mini 4K, which is able to print small models like this with almost twice as much detail on the XY plane.

(Image credit: Tom's Hardware)

Printing Miniatures on the Creality LD-002R

(Image credit: Chitubox)

To test out the detail when printing miniatures, I printed the Energy Crystal model from Loot Studios to see how the LD-002R would perform. The model has a thin base with a dense patch of support structures as well as multiple tall support structures which extend to the top of the model. The part printed out in just under six hours and I was easily able to snap the support material off the model without damaging even the smallest feature.

(Image credit: Tom's Hardware)

The detail on the base looked great, and I was impressed with how easy the support removal process was. The only problem I ran into was the dimpled surface on the very bottom of the model which was left by the dense support structure.

(Image credit: Tom's Hardware)

Print Speed Comparison of the Creality LD-002R vs. Anycubic Photon Mono

(Image credit: Tom's Hardware)

Creality offers two MSLA resin 3D printers in the LD-002X family; the LD-002R, the subject of this review, and the LD-002H. The primary difference between the two is the LCD used for masking; the LD-002R uses a 5.5” RGB LCD screen which requires a longer exposure time while the LD-002H uses a 6.08” inch Mono LCD which can make layers at almost four times the speed. Mono LCD screens allow more of the UV exposure to reach the vat, which greatly reduces the amount of time required to cure each layer.

To get a clearer picture of the build time difference between the Creality LD-002R and a printer with a Mono LCD, I compared the Eiffel Tower print from the $199 LD-002R with the Verdant King print I made on the $240 Anycubic Photon Mono. MSLA resin printers create parts layer by layer, as opposed to the volumetric approach used by FDM filament printers which means the total print time is generally based on the height of the model, not the width or amount of material used.

	Anycubic Photon Mono	Creality LD-002R
Exposure Time	2.0 seconds	9. 0 Seconds
Lift Speed	180mm/min	65mm/min
Retract Speed	240mm/min	150mm/min
Print Height	118.73mm	120.93mm
Print Time	6 Hours	19 Hours 15 Minutes
Print Speed	19.79mm/hour	6.28mm/hour

The difference in print speed is dramatic due to the differences in the exposure time and lift speeds. These settings are individually adjustable in the Chitubox software, but it can be tricky for a beginner to understand how these parameters can affect a printed part. While it’s easy to increase the lift and retract speeds as well as reduce the exposure time on the Creality LD-002R, a beginner shouldn’t need to focus on these changes to get quality prints, and an experienced user won’t want to spend time dialing the printer in through a process of trial-and-error.

(Image credit: Tom's Hardware)

At first glance, spending less than $200 on an MSLA Resin 3D printer seems like a bargain. However, the one thing we can never buy is time and the Creality LD-002R takes a ton of it to complete a model. The fact that our store-bought review unit had a clearly-used platform and that we didn’t receive a response from Creality also makes us concerned about quality control and customer support.

The $30 difference between the Creality LD-002R and the Anycubic Photon Mono makes the gap between these two machines seem that much larger, with the Photon Mono offering superior features and specs across the board for only a relatively-small cost increase. The RGB LCD used by the LD-002R suffers from a relatively long exposure time when compared against MSLA resin 3D printers like the Anycubic Photon Mono that use a Mono LCD for faster print speeds.

If you’re looking for a budget MSLA resin 3D printer at a price point of under $200 and want to stay in the Creality ecosystem of products, the LD-002R may be a fit for you. However, you’ll need a lot of patience while waiting for those prints and hoping for any response from Creality customer service.

Andrew Sink first used a 3D printer in 2012, and has been enthusiastically involved in the 3D printing industry ever since. Having printed everything from a scan of his own brain to a peanut butter and jelly sandwich, he continues to dive ever more deeply into the endless applications of additive technology. He is always working on new experiments, designs, and reviews and sharing his results on Tom's Hardware, YouTube, and more.

3D printer Creality LD-002R LCD in Moscow

Out of stock

Add to compare

Item added to compare Go

Free shipping within Russia

20 900 ₽

26 900 ₽

-22%

Notify me of admission

Official distributor

We work directly with manufacturers.

Any form of payment

See the 3D printer in action in our demo room.

Own warranty service

Warranty and post-warranty service for equipment purchased from us.

Permanent 10% discount on consumables

When you buy a 3D printer from us,
, you get a 10% discount on all consumables.

3D printer Creality LD-002R LCD is a new compact LCD printer at an affordable price. The Creality LD-002R LCD is a combination of solid build quality, high print resolution and ease of use. The model is suitable for both beginner makers and for professional use.

Advantages of Creality LD-002R LCD 3D printer:

High print resolution - 2K, spot resolution 26.1 microns.

Parallel LCD matrix provides stable, uniform illumination up to 90%.
4X / 8X uniform smoothing function.

Large build area allows you to print many models at once.
The perforated plate guarantees the best adhesion of the model to the platform.
Ball screw and Z-axis linear guide ensure stable movement and print accuracy.

Dual fans and an active activated carbon filtration system effectively remove odors from the air.

Simple four-screw calibration.

All-metal housing reduces vibration for smoother printing.
3.5-inch display for real-time settings management and print monitoring.

Convenient resin pot with FEP protective film and level marks.

Convenient side window provides quick access for printer maintenance.

3D printer
Print bed
Photopolymer bath
USB stick
Plastic spatula
Metal spatula
Screwdriver, wrenches 2, 2. 5, 3 mm
Paper funnels 4 pcs.
Power supply
Gloves 2 pairs
Release film
Brush
Masks 2 pcs.

Sernat

08/31/2020

Your review is the only one I found in RuNet. Thanks for it. To complete the picture, there are not enough printouts of test models. Without this, it is impossible to evaluate the errors in the printouts. If you don't mind, please add a review. Thank you.

Payment and delivery

Delivery scale

Delivery to all regions of Russia and countries of the Customs Union.

Free shipping

When you buy a 3D printer (except assembly kits) you get free shipping.

Cash

In our store you can pay for your order in cash.

Online payment on the website

You can pay for orders with a bank card on the website of our online store.

Buy with this product

Add to compare

Product added to compare Go

Out of stock

Photopolymer resin ESUN Water Washable gray (0.5 l.) Materials

Add to compare

Product added to compare Go

Available

ESUN Hard-Tough Resin, blue, (1L) Photopolymer resin for 3D printers

Add to compare

Product added to compare Go

Out of stock

Photopolymer resin ESUN Standard white (1 l.) Photopolymer resin for 3D printers

Add to compare

The item has been added to compare Go

Out of stock

Photopolymer resin ESUN Standard gray (1 l.) Photopolymer resin for 3D printers

Add to compare

Product added to compare Go

Out of stock

Anycubic Wash&Cure model cleaner and curer Additional equipment

Similar Items

Free Shipping

Add to Compare

Item added to Compare Go

Out of stock

Phrozen Sonic Mini 3D Printer 3D printers

Free shipping

Add to compare

Item added to compare Go

Out of stock

3D Printer Elegoo Mars UV Photocuring LCD 3D printers

Free shipping

Add to compare

Item added to compare Go

Out of stock

Anycubic Photon S 3D printer black 3D printers

Free shipping

Add to compare

Item added to compare Go

Out of production

Anycubic Photon Zero 3D Printer 3D printers

Free shipping

Add to compare

Item added to compare Go

Out of production

Wanhao GR1 3D printer 3D printers

features, photos and customer reviews

1 795 ₽Go to the store

This product is no longer for sale, see similar ones there are similar and similar

The price decreased by 25.

55 ₽ Cheaper than average, slightly

-1

Seller reliability - 0%

Not recommended to buy, E-life Fortress Store

On the site for more than 2 years

7 Low overall rating (

) dissatisfied with communication
Items not as described
Slow shipping
No dissatisfied customers found for the last 3 months

Prices from other sellers from 1622.7 ₽

1 623 ₽

Part 3D printer 2K-screen for LD-002R 3D printer with a resolution of 2560x1440

0 ONITS

Reliability-89%

Seller Shenzhen Xinshenics COO., LTD.

Go to StoreGo to Store

Found 48 Similar Items

-2

% -002h QA object uv display printer part

Reliability of the seller 89%

-0. 4

4 598 ₽

1 pc. 2K screen for Crely 3D LD-001 DLP spare parts for 3D printer

The seller’s reliability 100%

Equal data

305.21 ₽

Crely 3D SLA LD-006 FEP, released film 200*140*140*140*140*140*140*140*140*140* 0.15mm for halot-one/ld-002h/ld-002r uv resin 3d printer parts

Seller Reliability 0%

13 251 – 23 835 kr

Creality 3d ld-002h/ld-002r lcd resin 3d printer uv photocuring lcd with 3.5 inch touch screen air filtration z axis linear rail

The reliability of the seller 72%

1 856-3 480 ₽

FEP Anycubic 0.15-0.2 mm FEP 140x200 mm 3D printer IMPRESORA for LD-002R LCD Polymer Crealy 3D Picture

Reliability of the seller 83%

-3

983. 29 Spare parts

The reliability of the seller 55%

2 693 ₽

Monochrome LC-Excranis Voxelab, 6 inches, 2K, for a 3D printer near, resolution 2560x144 0, accessories for other brands

Reliability of the seller 83%

-0.9

Creality 3d 200*140*0.15mm light curing FEP insulated release liner for ld-002/ld-002r uv resin 3d printer parts

917.69 – 3 279 ₽

Creality 3d 200*140*0.15mm light-curing fep insulation release liner for ld-002/ld-002r uv resin 3d printer parts

3 Seller Reliability 55%

-4

10003

Vigorous custom flexible resin printing plates 138x78mm spring steel sheet 3d printer parts + base for creality ld-0003 09002r 3 9000

008 0

The reliability of the seller 55 %

-0. 8

690.51 ₽

Glass protectors compatible with a 5.5-inch 2560x1440 2K LS055R1SX03 for a photon 3D printer Wanhao D7

0,000

Seller Reliability 100%

-7

1 639 – 3 082 ₽

Creality 3d 42-48 object of service agreement hybrid stepper motor two-phase 48 mm reprap y axes for ld-002 crhr2 -200b lcd display diy 3d printer parts

The reliability of the seller is 83%

1 813 ₽

Tronxy 2K 3.5-inch LCD, 3D accessories, 3D printer, photo-adapted LCD-screen

Seller Reliability 89%

Creality 3d 42-48 QoS object hybrid stepper motor two phase 48mm reprap y axis for ld-002h ld-002r cr-200b diy 3d lcd display -printer parts

The reliability of the seller 89 %

-1

3 476 ₽

5. 5 inches 2k 2560x1440 LS055R1SX04 LCD -Tabled Film Protective Glass for Anycubic Photon D7 UV SLA SLA 3D 3

Reliability of the seller 72%

1 639 – 3 082 ₽

Creality 3d 42-48 object of service agreement hybrid stepper motor two-phase 48 mm reprap y axes for ld-002hr ld-002hr 200b lcd display diy 3d printer parts

Reliability of the seller 55%

1 508 ₽

2 pcs. creality 3d 0.15mm light curing pep insulated release liner film 200*140*0.15mm for ld-002r ld-002h ld-001 resin uv 3d printer parts

Seller Reliability 83% 900

Glass protectors compatible with 5.5 inch LCD 2560x1440 2k ls055r1sx03 for photon wanhao d7 light curing 3d printer

The reliability of the seller is 100 %

-3

4 591 ₽

5. 5 inches 2560x1440 2K -display Lights Curly Screenshop Modules MODUL SECROM SPERE SCARN ENECBEC s uv printer part

Seller reliability 89%

-0.3

protective glasses compatible with lcd screen 5.5 inch 2560x1440 2k ls055r1sx03 for wanhao d7 photonic 3d printer

The reliability of the seller 100%

962.57-1 104 ₽

Case for 3D printer, protective insulating lid LD-002R ANYCUBIC Photon Mono X/PHROZEN

9000 1

9000 Seller Reliability 83%

-0.2

New tronxy light-curing 3d printer parts 5.5 inch 2k lcd with tempered glass display screen for dlp lcd 3d printer projector

The reliability of the seller 72 %

-0. 2

6 035 ₽

Spare parts for a 3D printer, LCD display 2560x1440 2K LS055R1SX03, set for light curing, display for photon 3D-printing , VR projector

0 9000

The reliability of the seller 89 %

-8

1 942 ₽

WiseCOCO 5.5 inch photon 3D printer LS055R1SX04 2560X1440 QuAD-HD for a photon printer DIST + Film from the dummy from the tank of the blessed glass 9000 9000 9000 1

The reliability of the seller 89 %

-9

1 933 ₽

WiseCOCO Photon 3D prints 2K-screen 5.5 inch 2560x1440 QUAD-HD Display LS055RSX04 + FILLICARY FROM TURGE

The reliability of the seller 89 %

-5

2 030 ₽

WiseCOCO 6 inches LS060RSX01 screen 2560x1440 for the DLP SLA 3D printer LCD

Seller reliability 89%

952. 22 ₽

New 1.4 3d printer screen display 12864 lcd ender-3 ramp screen + cable for creality ender-3 3d printer

-3

Parabated data

1 049 -7 609 ₽

with LCD 2560x1440 2K LS055R1SX03 DISPECAL Display Lamp WANHAO Duplic DuPLO and D7 Object of Agreement 3D -printer parts

Seller Reliability 0%0003

The reliability of the seller 83 %

-7

2 020 ₽

WisecoCo photon 3D Exchanger Printer 5.5 inch 2560x1440 2K Quad-HD for photon princes of the high brightness of LS05R1SX04 sx04

The reliability of the seller 89 %

-9

917. 00-3 320 ₽

Removable plates for 3D printing, 138x78 mm, for Crelyity LD-002R

1 413 ₽

2 pcs Protective Glass are compatible for 5.5 inches LCD 2560x1440 2K LS055R1SX03 for photon Wanhao d7 3D printer

9000 . 5.5 inches LCD-display 2560x1440 2K LS055R1SX03 Glass protective screen for Anycubic photon Wanhao D7 3D printer part

Reliability of the seller 100 %

-0.3 9000 9000 %

002 899.05 ₽

1 pc, a protective lamp for the LCD screen 5.5 inch 2560x1440 2K LS055R1SX03

The reliability of the seller 89%

2 09000 LD-002H UV 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405nm 405NM Beadboard Lamp Panel Integrated Beads Violet for Creality LD-002H/LD-002R DLP 3D Printer

The reliability of the seller 55 %

9000. 6

9000 %

2 084 ₽ 9000 ₽ 9000 ₽ 9000 ₽ - 4.3' inch touch LCD;'control panel screen with connected cable for creality cr-10s pro 3d printer

''control panel screen with connected cable for creality 3d cr-10s pro 3d printer mainboard parts

1413 ₽

Ls055r1sx04 5.5 inch 2k lcd 2560x1440 tft lcd screen for diy project 3d printer dlp sla

The reliability of the seller 51 %

-11

1 381-1 386 ₽

9000 2K-screen 2560x1440 LS055R1SX03 for Photon Wanhao D7 Light-adaptable panel for 3D Removable backlight

4,0003

The reliability of the seller 51%

35 350 ₽

UV curing VR Panel for DLP/SLA 3D Printer LS060RSX01 6.

Creality ld002r lcd resin 3d printer

Creality LD-002R 3D Printer | LD-002R 3D LCD Resin Printer

LD-002R LCD Resin 3D Printer

LD-002R LCD Resin 3D printer news

Creality LD-002R Review: MSLA Resin 3D Printing on a Budget

Tom's Hardware Verdict

Pros

Cons

Specifications

Creality LD-002R: Included in the Box

Set Up of Creality LD-002R

Leveling the Build Platform on Creality LD-002R

Printing Safety with Creality LD-002R

Printing the Included Test Print on the Creality LD-002R

Preparing Files for Printing with Chitubox

Printing with the Creality LD-002R

Printing Miniatures on the Creality LD-002R

Print Speed Comparison of the Creality LD-002R vs. Anycubic Photon Mono

3D printer Creality LD-002R LCD in Moscow

Payment and delivery

Buy with this product

Similar Items

features, photos and customer reviews

The price decreased by 25.

Seller reliability - 0%

Prices from other sellers from 1622.7 ₽

Found 48 Similar Items

3 Seller Reliability 55%

002 899.05 ₽

Learn more