3D scanner comparison


Best 3D scanner 2023 - Expert selections for every need

What is the best 3D scanner?

Many different types of 3D scanners exist, from desktop 3D scanners to handheld 3D scanners and advanced metrology systems. 3D scanners serve an extremely wide range of applications, from reverse engineering to 3D body scanning or even forensic investigations.

However, given the low number of reliable 3D scanner reviews, it can be challenging to find the best 3D scanner. It can also be complex to know what kind of 3D scanner to get based on your application. A $2,000 3D scanner won’t be sufficient for part inspection, and a $60,000 3D scanner would be overkill if you don’t need the precision.

With that in mind, our goal is to offer an overview of the best 3D scanners in different categories. We broke down our best 3D scanner picks into actionable selections:

  • Professional: A mix of the best desktop and handheld options for professionals
  • Affordable: Entry-level 3D scanners for makers with prices starting at around $400
  • Metrology: High-precision 3D scanners for demanding use cases
  • Handheld: Portative devices that can access hard-to-reach places
  • SLAM and iMMS: Mobile laser 3D scanners for BIM and other large-scale applications
  • TLS: Terrestrial LiDAR scanners
  • Dental (desktop): Stationary 3D scanners for the dental labs
  • Jewelry: Closed, high-precision 3D scanners for jewelers
  • 3D body scanners: Booths and handheld color 3D scanners

Note that there can be some overlap between categories. For example, some handheld 3D scanners are precise enough for metrology or can capture colors and work for 3D body scanning.

Tip: Use the table of contents to the top left of your screen to easily navigate between our selections.

We also run through different 3D scanning applications (reverse engineering, 3D inspection, architecture, etc.) and provide concise explanations of the various 3D scanning technologies that exist.

Professional 3D scanner selection

This category groups some of the best professional 3D scanners. Our selection spans a wide price spectrum and includes both desktop scanners and handheld 3D scanners. These 3D scanners can cover most professional use cases.

BrandProductAccuracyCountryPrice

Approximate starting prices based on supplier-provided information and public data. Prices may vary by region, over time and do not include additional products or services (taxes, shipping, accessories, training, installation, …).

SCANTECH (HANGZHOU) CO., LTD

This brand is a certified partner from our network.

iReal 2E 0.1 mm0.003937 inChina$ 3,9803 980 €3,530 £593,243 ¥Quote
Shining 3D

This brand is a certified partner from our network.

EinScan H 0.1 mm0.003937 inChina$ 4,9994 999 €4,434 £745,131 ¥Quote
Shining 3D

This brand is a certified partner from our network.

EinScan HX

This product has been reviewed by our team.

0.04 mm0.001575 inChina$ 12,00012 000 €10,644 £1,788,672 ¥Quote
MeditSolutionix C500 0.01 mm0.000394 inSouth Korea$ 40,00036 500 €35,482 £5,962,240 ¥Quote
Creaform

This brand is a certified partner from our network.

HandySCAN BLACK Elite

This product has been reviewed by our team.

0.025 mm0.000984 inCanada$ 65,00057 000 €57,658 £9,688,640 ¥Quote
GOMATOS Q

This product has been reviewed by our team.

Germany upon requestQuote
GOMGOM Scan 1

This product has been reviewed by our team.

Germany upon requestQuote
SCANTECH (HANGZHOU) CO., LTD

This brand is a certified partner from our network.

SIMSCAN

This product has been reviewed by our team.

0.02 mm0.000787 inChina upon requestQuote

Expand to see more specs

The products in the table are ranked by price (low to high).

BrandProductTechnologyCategoryCountryPrice

Approximate starting prices based on supplier-provided information and public data. Prices may vary by region, over time and do not include additional products or services (taxes, shipping, accessories, training, installation, …).

SCANTECH (HANGZHOU) CO., LTD

This brand is a certified partner from our network.

iReal 2EStructured lightMobile > HandheldChina$ 3,9803 980 €3,530 £593,243 ¥Get a quote
Shining 3D

This brand is a certified partner from our network.

EinScan HHybridMobile > HandheldChina$ 4,9994 999 €4,434 £745,131 ¥Get a quote
Shining 3D

This brand is a certified partner from our network.

EinScan HX

This product has been reviewed by our team.

Structured lightMobile > HandheldChina$ 12,00012 000 €10,644 £1,788,672 ¥Get a quote
MeditSolutionix C500Structured lightStationary > DesktopSouth Korea$ 40,00036 500 €35,482 £5,962,240 ¥Get a quote
Creaform

This brand is a certified partner from our network.

HandySCAN BLACK Elite

This product has been reviewed by our team.

Laser triangulationMobile > HandheldCanada$ 65,00057 000 €57,658 £9,688,640 ¥Get a quote
GOMATOS Q

This product has been reviewed by our team.

Structured lightStationary > IndustrialGermany upon requestGet a quote
GOMGOM Scan 1

This product has been reviewed by our team.

Structured lightStationary > DesktopGermany upon requestGet a quote
SCANTECH (HANGZHOU) CO., LTD

This brand is a certified partner from our network.

SIMSCAN

This product has been reviewed by our team.

Laser triangulationMobile > HandheldChina upon requestGet a quote

Overview of the best professional 3D scanners

The iReal 2E is another versatile 3D scanning option in the entry-level price range. It uses VCEL structured light to capture medium- to large-sized objects. Like infrared light, VCEL light is invisible to the human eye and is therefore also particularly adapted to face and body 3D scanning.

Scantech has reported diverse use cases for the iReal 2E 3D scanner, namely in forensic investigations, healthcare, and even culture preservation. In the latter, Scantech’s customer 3D scanned a woman performing different Tai Chi movements– an interesting and uncommon application!

Contact manufacturer Get a quote Add to comparison

The EinScan H was launched alongside the EinScan HX in September 2020. It uses a combination of structured LED light and infrared light, with a built-in color camera for texture acquisition.

This 3D scanner can therefore serve a range of applications involving color capture, with uses in retail, art preservation, healthcare, and more. Furthermore, its infrared light is eye-safe and won’t blind users during a face or body scan.

Shining 3D’s versatile EinScan H is a great entry-level deal for most basic use cases, and its software is getting more intuitive by the update.

Contact manufacturer Get a quote Add to comparison

The EinScan HX features hybrid technology: it has both structured LED light and laser triangulation capabilities, an industry-first from Shining 3D. Each technology is accessible through a specific mode that the user chooses at the beginning of a 3D scanning process.

After reviewing the HX, we found that it is a powerful and versatile product, capable of 3D scanning parts of various properties (sizes, colors, textures). It has a nice and sturdy finish and is easy to manipulate. In addition, the little weight it has is very well distributed to offer an ergonomic balance.

In this price range and at this level of performance, the EinScan HX is unrivaled.

Read the full review: Shining 3D EinScan HX review

Contact manufacturer Get a quote Add to comparison

The SIMSCAN is extremely lightweight for a handheld 3D scanner, weighing only 570 grams. It’s also very compact– the absolute smallest in its class– with dimensions of 203 x 80 x 44 millimeters. Scantech earned a Red Dot Design Award in 2021 for the SIMSCAN’s disruptive design.

After using the SIMSCAN to 3D scan various types of parts, we can confirm it’s an excellent product that feels, looks, and works great. With a price of around €25,000, the SIMSCAN’s price-to-performance is outstanding. The only blemish lies in the software, but it receives updates regularly and you can export your scans to your preferred suite.

Read the full review: Scantech SIMSCAN review

Contact manufacturer Get a quote Add to comparison

The BLACK Elite tops out Creaform’s flagship HandySCAN range, which we have reviewed several times over the years. It delivers a powerful performance that reminds us of the Metrascan 750, but without all the hurdles (complex setup, number of parts and accessories, and large footprint).

Creaform’s HandySCAN BLACK Elite boasts a clean, robust finish. Everything exudes quality and rigor, the attention to detail is similar to the feeling that Apple products give off. It’s no wonder this scanner received a Red Dot Design Award (2019).

Read the full review: HandySCAN BLACK Elite review

Contact manufacturer Get a quote Add to comparison

With a starting price of around €20,000, the GOM Scan 1 is GOM’s most entry-level, metrology-grade solution. We visited GOM’s Benelux HQ to review the scanner in early 2022, and were not disappointed.

The offer? GOM quality and performance at an affordable price. It is on par with high-end metrology 3D scanners and is quite fast at 6,000,000 points per scan. The GOM Scan 1 also benefits from the same, powerful GOM Inspect software as its more premium counterparts.

It is a small, lightweight, and precise machine packed with very serious capabilities.

Read the full review: GOM Scan 1 review

Contact manufacturer Get a quote Add to comparison

The ATOS Q is part of GOM’s ATOS lineup, a range of industrial-grade optical metrology solutions. It is aimed at industrial users looking for a powerful and flexible metrology solution at a reasonable price.

One of the ATOS Q’s key selling points is the fact that it can be easily moved along an assembly line or from one site to another. It can’t be qualified as “portable”, but is without a doubt “transportable”.

The scanner also offers a lot of flexibility in part type and size thanks to its multiple lenses and is able to acquire difficult surfaces thanks to its blue light equalizer.

Read the full review: GOM ATOS Q review

Contact manufacturer Get a quote Add to comparison

Solutionix is part of the larger, South-Korean Medit group, and is known for its high-precision dental 3D scanners. Their C500 is able to scan larger objects while benefitting from the same, excellent precision and resolution. Its automatic turntable not only turns but also tilts, providing very thorough scans.

While the Solutionix C500 is sensitive to dark and shiny surfaces, it offers very clean data and high resolution when such surfaces are matted with special spray (like AESUB). The C500 comes with four different sets of lenses for varying fields of view, resolution, and accuracy. Its smallest lens set gives an accuracy of 10 microns and a resolution of just 28 microns (point-to-point distance).

The C500 is particularly adapted to small parts, but can be mounted onto a tripod for the occasional large scan.

Contact manufacturer Get a quote Add to comparison

Affordable 3D scanners for makers

This selection includes some of the best affordable 3D scanners for makers.

BrandProductAccuracyCountryPrice

Approximate starting prices based on supplier-provided information and public data. Prices may vary by region, over time and do not include additional products or services (taxes, shipping, accessories, training, installation, …).

Scan DimensionSOL Denmark$ 599609 €531 £89,285 ¥Buy
RevopointPOP 2 0.1 mm0.003937 inChina$ 699711 €620 £104,190 ¥Buy
CrealityCR-SCAN 1 0. 1 mm0.003937 inChina$ 700700 €621 £104,339 ¥Contact
Matter and FormScanner V2 0.1 mm0.003937 inUnited States$ 749761 €664 £111,643 ¥Buy
Shining 3D

This brand is a certified partner from our network.

EinScan-SE (Elite) 0.1 mm0.003937 in$ 1,1991 219 €1,064 £178,718 ¥Contact

Expand to see more specs

The products in the table are ranked by price (low to high).

BrandProductTechnologyCountryPrice

Approximate starting prices based on supplier-provided information and public data. Prices may vary by region, over time and do not include additional products or services (taxes, shipping, accessories, training, installation, …).

Scan DimensionSOLLaser triangulationDenmark$ 599609 €531 £89,285 ¥Buy on Amazon France
RevopointPOP 2Structured lightChina$ 699711 €620 £104,190 ¥Buy on Revopoint
CrealityCR-SCAN 1Structured lightChina$ 700700 €621 £104,339 ¥Contact manufacturer
Matter and FormScanner V2Laser triangulationUnited States$ 749761 €664 £111,643 ¥Buy on Amazon US
Shining 3D

This brand is a certified partner from our network.

EinScan-SE (Elite)Structured light$ 1,1991 219 €1,064 £178,718 ¥Contact manufacturer

Overview of the best affordable 3D scanner options

Revopoint launched the POP 2 towards the end of 2021 after a successful Kickstarter campaign with the original POP. We reviewed the original POP shortly before this release, and it seems that some of the quacks (mainly software-related) we encountered have since been worked out. Their new software features a calibration process and a new “Wi-Fi host” mode.

The POP 2 is an interesting option for makers or beginners looking to learn more about 3D scanning. We wouldn’t particularly recommend it for professional use cases, though it can get the job done if you don’t need high resolution.

The Revopoint POP 2 can be used on a small tripod or as a handheld device, and is able to capture colors.

Buy on Revopoint Add to comparison

The EinScan-SE is a powerful entry-level desktop 3D scanner designed to capture small- to medium-sized objects in 3D. Launched back in 2017, it’s still relevant today as an affordable, professional-grade option.

It is based on white structured light technology and offers two 3D capture modes: Fixed Scan and Auto Scan (with a rotating table). The Shining 3D EinScan-SE is a versatile and fast 3D scanner, suitable for a wide range of applications and designed with 3D printing applications in mind.

Contact manufacturer Add to comparison

This affordable desktop 3D scanner is geared towards hobbyists and tech enthusiasts. The SOL 3D scanner is equipped with an automatic turntable to complement its hybrid 3D scanning technology (a combination of structured light and laser triangulation).

Scan Dimension notes that this 3D scanner is easy to use, thanks to a simplified app that lets users avoid complex calibration and software manipulation.

Buy on Amazon France Add to comparison

The CR-SCAN 1 is another 3D scanner under $1,000. It can be used on a tripod as well as in handheld mode. According to Creality, the use of markers is unnecessary thanks to their AI-based alignment algorithm.

Contact manufacturer Add to comparison

Matter and Form has been producing affordable desktop 3D scanners since 2014. The 3D Scanner V2 (a.k.a. MFS1V2) is, as its naming suggests, the second version of their flagship product, the Matter and Form MFS1V1 3D scanner.

It boasts a great price-to-performance ratio and is able to quickly scan 3D objects while displaying results in real time. Matter and Form also manufactures the Bevel dongle for use with 3D scanning smartphone apps.

Buy on Amazon US Add to comparison

Metrology 3D scanner selection

3D metrology is the process of acquiring highly accurate physical 3D measurements of an object. The result is a digital 3D model that users can analyze or retro-engineer.

Take quality inspection, for example. Professionals can compare the 3D scan to a reference CAD model to make sure the object respects established norms and standards. 3D metrology helps ensure product quality while saving time and, thus, lowering costs.

Handheld 3D scanner selection

Handheld 3D scanners have been gaining a lot of popularity over the past few years. They offer various benefits over other types of 3D scanners:

  • Ability to access hard-to-reach places
  • Relative ease of use
  • Portability

Their versatility makes them suitable for a wide range of industries, including automobile, aerospace, engineering, and design, and some can even be used for 3D body scanning.

SLAM 3D scanner selection

SLAM (Simultaneous Localization and Mapping) technology allows a device to position itself and navigate through a given space based on its surroundings. Sometimes called CML (Concurrent Mapping and Localization), it was initially developed for robots and autonomous appliances.

In 3D scanning (mobile mapping), SLAM algorithms combine and use the sets of data collected from one or more sources to track the scanner’s position, all while building up an accurate, complete 3D point cloud of the surrounding environment.

SLAM-based 3D scanners can work in extremely remote locations where GPS or GNSS signals are unavailable, and make it easy to quickly 3D scan large areas like building sites and underground caves.

TLS (Terrestrial Laser Scanner) selection

Terrestrial laser scanning (TLS) is a form of 3D scanning in which tripod-mounted laser scanners are used to capture large objects and environments. The technique is widely used in construction, surveying, forestry, and other disciplines.

Also known as long-range laser scanning, TLS involves deploying a scanner in a static location, whereas other laser scanners may be handheld or mounted to vehicles to capture data from a greater number of vantage points. TLS produces more accurate scans than mobile scanning — at the expense of speed and simplicity.

These 3D scanners are often generically called LiDAR scanners, though terrestrial scanners aren’t the only type of scanner to use the technology.

Desktop dental 3D scanner selection

Bit by bit, dentists are beginning to replace traditional methods with digital dentistry. This involves the use of digital capture, digital design, and digital production technologies to improve the speed, accuracy, and profitability of dental practice.

A key part of digital dentistry is the use of 3D scanners, which capture 3D shapes using a combination of cameras and light projection before transferring the result to a computer.

Desktop dental 3D scanners capture dental models or impressions (negative imprints of a patient’s teeth and gums) and are usually used in a laboratory setting.

Jewelry 3D scanner selection

A popular use of 3D scanning technology is jewelry 3D scanning. This is the process of 3D scanning jewelry, precious metals, and gemstones with the goal of creating a digital copy of the original object. The digital twin can be used for many purposes, such as repairing or duplicating a valuable item.

3D scanners have been adopted as a supplementary tool by traditional jewelers, but the technology has also allowed newcomers to enter the field, many of which have combined 3D scanning with jewelry 3D printing.

Most jewelry 3D scanners are enclosed or partly enclosed desktop machines that offer ideal lighting conditions. Desktop jewelry 3D scanners almost always feature an automatic turntable, or auto-rotating table, on which the piece of jewelry is placed to be scanned.

3D body scanner selection

3D body scanners are designed to capture your full body in 3D. The result is a 3D model (or 3D avatar) of your exact body shape with accurate data such as body measurements, posture analysis, textures, …

Originally developed for the fashion industry as fast and accurate 3D measurement solutions, 3D body scanners are now used in various other fields such as healthcare, 3D figurines and 3D photos, fitness, and entertainment.

To obtain a full-body 3D scan, the customer or patient holds a pose for a few seconds, which is the time it takes for the 3D scanner to capture images from all angles. The 3D software then reconstructs the final 3D model of the body by “stitching” all of the images together, generating a highly detailed 3D model. Models can have colors and textures depending on the type of body scanner.

Which 3D scanner is the best for me?

3D scanning can be used in a large variety of fields. For every application, the features necessary to generate a great 3D model are different. The 3D scanner must be chosen according to your desired use and results.

What the best 3D scanner is for you will depend on many factors, detailed below.

3D scanning field of application

The first thing to take into consideration is the field in which the 3D scanner will be used. It could be for example:

Professional use
  • Small objects: dentists, jewelers, and other professionals can use 3D scanning to capture small pieces.
  • Big objects: professionals such as architects and archeologists might need to 3D scan large objects such as statues, archeological fields, or buildings.
  • 3D body scanning is increasingly used in various professional fields such as healthcare and 3D figurines.
Personal use
  • Occasional scanning: A person might need to use 3D scanning on rare occasions or maybe just one time.
  • 3D scanning on a regular basis: You can use 3D scanning for various things from making personalized objects to making a replica of yourself, friends, or family members.

Type of 3D scanned object

Dimensions and distance of the object (scan area and scanning range)

The “best 3D scanner” will depend on the dimensions and the distance of the objects you wish to 3D scan. A desktop 3D scanner can’t 3D scan a 2-meter-tall statue, and a handheld 3D scanner might not be the best option to 3D scan a very small and precise piece.

Surface of the object

Not every 3D scanner is able to capture colors. For color capture, you need a scanner with photogrammetry.

It can also be challenging to capture objects with black, shiny, or reflective surfaces. However, as 3D scanning OEMs fine-tune their technology and hardware, such surfaces are becoming less and less of a challenge. For cases where it is a challenge, it is always possible to use a white mattifying spray.

Desired resolution

Not all 3D scanners offer the same level of resolution. Therefore, depending on the quality you need, some 3D scanner models are more adapted than others. Reverse engineering requires high resolution and precision, for example.

Desktop 3D scanners

Desktop 3D scanners can be ideal for both professionals and hobbyists that need to scan small parts. They tend to be more accurate since you aren’t holding and moving the 3D scanner around yourself.

Also, many desktop 3D scanners come with (or at least optionally) an automatic turntable, which makes it much easier to get clean 3D scans.

Handheld 3D scanners

Handheld 3D scanners, a.k.a. portable 3D scanners, are versatile and can 3D scan small to very large objects. They also enable users to 3D scan hard-to-reach places. The precision and the ability to capture color and texture will depend on the 3D scanner model.

3D body scanners

3D body scanners have applications in numerous fields.

  • Professionals: professionals might want to 3D scan a person to make a 3D figurine, prepare for a surgical intervention, follow-up on a pregnancy or skin conditions, etc.
  • Individuals: 3D body scanners can help with fitness goals and personal shape. These 3D scanners usually can’t capture color and texture but offer a high resolution.
3D scanning mobile apps

3D scanning mobile apps are ideal for occasional users that are not willing to or are unable to invest in a 3D scanner. They are not as precise as most 3D scanners, but mobile apps are a great way to get familiar with 3D scanning.

3D scanner price

3D scanner prices can range from just several hundred dollars to over $100,000.

Desktop 3D scanner price

Desktop 3D scanner prices vary a lot from one model to another. It can start at a few hundred dollars and can top out at around $50,000 for the more advanced 3D scanners. More industrial-grade, robot-mountable scanners can cost double.

Handheld 3D scanner price

The handheld 3D scanner price range is very wide. A professional handheld 3D scanner can start at around $5,000 and can reach up to over $70,000 for very high-end and advanced 3D scanners.

There are plenty of great entry-level options for a couple of thousand dollars. Mid-range handheld 3D scanners tend to cost between $10,000 and $30,000.

Industrial 3D scanner price

Industrial 3D scanners generally offer more cutting-edge features and higher precision. Hence, their prices can be pretty high, ranging from $10,000 for the simplest ones to more than $100,000 for the most evolved ones.

3D scanning applications

There are many reasons to buy a 3D scanner, for various industries and applications.

Reverse engineering

Reverse engineering, also known as retro-engineering, is the process of extracting information from an object or process and studying it. 3D scanners can be used to capture all the parts of a disassembled object to create a 3D model. The user will then be able to digitally study it in 3D afterward.

Jewelry

Jewelers are starting to use 3D printing and 3D scanning to build casts in order to create amazing jewels. Read more on our 3D printing and 3D scanning for jewelry page.

Dental

Dentists and dental labs are using 3D printing to build and create various dental appliances. Find more information on our 3D printing and 3D scanning for the dental industry.

Medical

3D scanners are very versatile and are used in many different ways in healthcare, from making prosthetics to studying a person’s posture. Find more information in our guide to 3D scanning and 3D printing for the medical industry.

A dental 3D scan by Pierre-Antoine.

Metrology/inspection

Industries need to make sure their factories are producing perfect products that are perfectly in line with the products’ reference dimensions. 3D scanners enable professionals to efficiently measure potential discrepancies.

Figurines and 3D selfies

3D portraits or mini-me’s are increasingly popular. To make one, you scan yourself in 3D and 3D print your mini lookalike. To learn more about the subject, you can visit our 3D printed figurines, 3D selfies, and 3D portraits page.

Architecture

Architects can use 3D scanning to capture an area, building, or habitation and present it in a more efficient way to their clients. Find more information on our 3D scanning and 3D printing for architects page.

Archeology and museums

Archaeologists, museum curators, and researchers are starting to use 3D scanning to get a better view and capture ancient pieces. To read more about this topic, you can visit our 3D printing and 3D scanning in archeology and cultural preservation page.

A dot cloud of Notre Dame. Source: engadget

Overview of 3D scanning technologies

Photogrammetry

Photogrammetry consists of taking measurements from photographs to recover the exact positions of surface points.

The principle of photogrammetry is to analyze several photographs of a static subject, taken from different viewpoints, and to automatically detect pixels corresponding to the same physical point.

Photogrammetry enables scanners to capture an object’s color (a.k.a. texture). This technology also often serves to detect positioning markers (sticky targets placed on or around the object to help the scanner precisely align scans together).

Structured light

3D scanners using structured light project a series of linear light patterns onto an object.

The system is then able to examine the deformations of each line and to calculate the distance between the 3D scanner and the object’s surface. With this data, the software is able to build an accurate 3D model of the object.

Structured light 3D scanning technology. Source: Depth Biomecanics

Triangulation

A 3D scanner using triangulation technology will project a laser beam on the object’s surface and measure the deformation of the laser ray (similar to structured light, but with one or more lasers).

3D scanning laser triangulation technology. Source: NeoMetrix

Contact

Contact 3D scanners probe the subject via physical touch. A touch probe moves along an object’s surface to record 3D information.

For more precise and detailed explanations, you can visit our 3D scanning technologies page.

FAQ

What is the most accurate 3D scanner?

The most accurate 3D scanners are metrology 3D scanners, which generally offer an accuracy of around 20 microns.

Is a 3D scanner worth it?

This is entirely up to how much you will be using your 3D scanner. We can however say that 3D scanning is an impressive technology that does help save a lot of time for product design, reverse engineering, part inspection, and many other use cases.

How much does a good 3D scanner cost?

Again, the definition of “good” is quite subjective in 3D scanning. Some of the best 3D scanners we have reviewed cost between $10,000 and $30,000. But a $5,000 3D scanner can do “good” if its specs meet your requirements.

Is 3D scanning expensive?

Not only is 3D scanning hardware generally expensive, but so are the necessary, professional software solutions. Sometimes, it’s a one-time fee for a permanent license; other times, a monthly or yearly subscription is the only way to access a software suite. And to run such software, you will likely require a powerful, monster of a PC with a lot of RAM and a high-end graphics card. You may also need to buy a tripod or turntable if they aren’t included in your 3D scanner package. All of this can quickly amount to several thousand dollars.

Day-to-day 3D scanning expenses can include cans of mattifying spray and rolls of adhesive markers if you need them. Other than that, aside from potential software subscriptions, there are no extra hidden costs.

Best 3D Scanner - The Top 10 3D Scanners for 2023 [Reviews]

Much like a regular scanner, laser scanning 3D uses various methods to analyze a physical object and then relay that data to a computer to create digital 3D models. The 3D digitizer process might be automatic or users might need to complete the model to their requirements by using software. The aim is usually to get an accurate model to the right standard and format, ready for 3D printing, for virtual reality applications or other purposes. 

Such scanners are used in many professional industries, but with advances in home 3D printing, there are now also a good variety of home options. They are sometimes called portable 3D scanners or handheld scanners if they’re designed as such. These allow you to easily scan small to medium-sized objects for 3D printing.

Some come completely assembled while others, like 3D printers themselves, you’ll have to put them together by yourself. The benefit for those that are good with that type of thing is it reduces the price and allows for easier upgrades and modifications.

Scanning is typically done using laser triangulation or various forms of structured light to surround the object and measure its 3D dimensions or ‘geometry’. High-quality 3D scanner camera lenses also capture the color and surface texture of the object. Using accompanying or third-party software, the model can then be scaled up or down, or completely modified. 

It’s never been easier to scan 3D objects!

How Do 3D Scanners Work?

So, how do you scan 3D objects into a computer? Whether it’s on an industrial scale, at a small business, or on a desk at home, 3D scanners all share similar characteristics in the way they work. 

The majority use laser and/or white light technology and cameras. The physical object is placed in a bed, tray, or suitable location. Electromagnetic light bounces off the object, measuring its circumference, full dimensions, and all its finer details. 

Depending on the scanner it may use multiple light sources, cameras, and other tech to aid this process. The collected data is called a point cloud, which refers to the number of points captured by the laser. 

The more points collected the more accurate the scan. A high-resolution scanner can capture hundreds of thousands of points in seconds and reach millions overall. The whole process only takes a few minutes.

While the light tends to be a measure of the object’s geometry, HD cameras tend to capture the surface detail and color.

The data recorded can then be fed into a computer-aided design program or similar software for inspection and manipulation. E.g. if you’re planning to use it for 3D printing, the model might need scaling up or down, hollowing, have added support structures, be re-colored or have brightness/contrast changes, etc.

There are, of course, different types of 3D scanner and scanning technology. So, let’s take a closer look at each one:

Types of 3D Scanners

There are several 3D scanner types. Before making your decision check out the section below:

Handheld vs Stationary

Handheld and stationary 3D scanners often use the same technology and can overlap in their functions. The difference lies mainly in the design.

 A handheld scanner has a grip and lets the user move around the object themselves to capture it at every angle.

A stationary scanner has to be positioned in front of the object, which is typically placed on a rotating plate and captures it as it spins 360 degrees. The user may have to reposition the object several times to capture every angle. 

Newer designs are becoming smaller and more easily portable.

Laser Triangulation

The most common technology used in 3D scanning is laser trigonometric triangulation. It records millions of different points on the surface of the object to build an accurate overall polygon mesh. These are common in handheld options and industrial-grade scanner machines. They can also work long-range and for laser-tracking objects.

Structured-Light 3D Scanners

Similar and often used interchangeably with laser triangulation, structured light or ‘white light’ projects itself in a grid-like pattern over an object. It can then measure the structure of that grid as it applies to the object by using sensors/3D scanner cameras and triangulation.

Long Range

Longer range scanners use phase shift or pulse technology that can capture millions of points while rotating 360 degrees with the aid of mirrors. This is more commonly used to scan large objects like cars or buildings.

They might also use ‘time of flight’ technology that measures the distance of an object in relation to the speed of light and the time it takes for it to return to a sensor.

This is less relevant for everyday 3D scanning and printing.

3D Scanning Applications

There are many different applications for 3D laser scanning - from those for 3D printing at home, to prototyping, industrial scale medical supply production and even architecture. 

Hobbyist 3D printing

Cheaper 3D scanners are typically used by home users for scanning simple objects and 3D printing them for fun. 

Medical

The medical field and dentistry commonly use 3D scanning to create implants and aids to serve their patients’ needs. For example, scanning people’s feet with a high-quality 3D scanner allows for the creation of orthotics (shoe inserts). It is also used in the creation of prosthetics.

Virtual Engineering

Industrial 3D scanners are used both in the creation and quality control of cars, planes, and even aerospace. It ensures existing parts are as accurate as their original models and that new viable parts are made.

Reverse Engineering and Repairs

From the home computer desk to the manufacturing floor, 3D scanning allows users to reverse engineer or copy existing objects. Saved models also allow for the reconstruction of damaged objects.

Virtual Reality

From creating realistic 3D worlds to the people that occupy them, 3D scanning devices are integral to the growing virtual reality industry. This ranges from AAA video games, virtual cinematography, and computer-generated imagery (CGI), to virtual tours and office meetings. It is also a side industry to motion capture.

Forensics

CSI has come a long way. Forensic experts nowadays don’t just have to rely on memory, photos, and evidence of a crime scene. They can capture the entire location in a full 3D model for closer inspection and for running through different scenarios.

Archeology and Archiving

From museums to libraries, 3D scanning is being used to log and preserve everything from artifacts to digitizing books. This also gives experts and the public remote access.

Architecture

3D scanning can also help architects map the areas they will be designing their buildings in, take inspiration from existing architecture, and aid in building miniatures/prototypes. 

What Should I Know Before Buying a 3D Scanner?

Before you buy a 3D scanner, there are several things to consider: 

  • your budget 
  • what you’ll actually be using it for 
  • it’s speed and accuracy
  •  the device’s other features.
3D Scanner Cost

3D laser scanner price ranges vary greatly. On the cheaper end, you may be able to pick one up for home for just shy of $300, like the XYZprinting 3D Scanner 1.0 A. However, if you want the highest overall quality and the ability to scan small and large objects. Or, if you’re a professional and need a 3D part scanner in a field like medical implants or automotive parts, you’re looking at anywhere between $3,000 and $35,000.

Typically, it’s best to look for 3D scanners for sale online where you can find the best selection and prices.

3D Printing

While a dual 3D printer scanner combo is rare, if you want to scan models for 3D printing, you will need to make sure it has good accuracy and resolution. The software also must be able to export to a usable format. You will need to check your 3D printer and its own software to see what file types it accepts and then choose your scanner accordingly.

Fortunately, almost all of our 3D scanner reviews include devices that can export in common file types like OBJ and STL.

It’s typically only the more expensive scanners that are good for other applications, like VR, full-body scanning, architecture, and engineering.

Handheld vs Stationary

We already explained the difference, but basically, a handheld scanner is mobile, while the stationary one will require you to move and adjust the object. Neither is necessarily better than the other, it’s all down to your needs.

Speed

How fast is the scanner? Do you have a lot of spare time or require the job to be done as fast as possible? All 3D scanners will take a few minutes to complete, while many scanning complex objects in high resolution can talk half an hour or longer.

Accuracy and Resolution

Accuracy refers to how close to the object being scanned your digitized model will be, measured in millimeters. Therefore, the smaller the better. The term resolution may be used interchangeably with accuracy or refer to the resolution of any cameras being used as part of the scanning process. 

Generally, the lower the millimeter, the better. Other factors also play a role in overall quality, such as lighting conditions, color, and depth.

Object Size and Space

Some types of 3D scanners excel at scanning small objects while others are better at medium to large. Others are all-rounders. Before buying a scanner, you should decide the general size of the items you will be scanning. 

You will also need to make room for the scanner. Although all the products on our list are small and relatively portable, stationary scanners at least need a table to work from. Likewise, there will be a minimum and maximum distance the scanner must be in relation to the object being scanned. 

You’ll need more room when scanning larger objects in full.

Connected Devices

All 3D scanners need to be connected to a computer or device to help monitor the process and for saving the digital model. This is usually done via a USB or HDMI cable. You will need to check that your computer or laptop meets the minimum requirements for the scanning and modeling software. Also, make sure that you have a tablet to make real-time monitoring easier. 

Software

Your device will either come with its own software or a popular third-party program to aid the process and to help touch-up the model once it’s scanned. Different 3D printing software is better suited to different skill levels. Some programs have a lot of features for experienced users and others do most of the basic tasks automatically. Check our 3D scanner reviews to see the software each device comes with and how advanced and easy to use it is.

Wrap Up

Whether you’re looking for a tool for your home or something more on an industrial scale for your business, our 3D scanner reviews have something for everyone. From handheld devices to structured lightboxes with turntables, you’ll be creating 3D models or reverse engineering parts in no time. Perhaps you’ll even do a 3D selfie or two!

If you’re still unsure about 3D printing after reading our reviews and guides, check out our answers to your most commonly asked questions below.

we choose the best in 2022 in our direction

In order to expand the user audience, SHINING3D offers universal solutions - the same 3D scanner is able to satisfy the needs of ordinary consumers and large businesses and be in demand in the conditions of industrial production of products. Based on the feedback, comments and reviews of device owners, taking into account their needs, the developers have improved the line of models, making 3D digitization and additive technologies even more accessible.

Content:

  • 3D 3D series EINSCAN
  • for beginners, designers or educational directions
  • Scanners for objects of different sizes
  • 3D scanning people and their persons
  • 3D EINSCAN PRO 2X 2020 900 9000 9000 3D 3D scanner 3D? Transcan C
  • What other indicators you need to understand in order to choose what you need
  • Accuracy
  • Ability to digitize in motion
  • Application of 3D scanners in mechanical engineering
  • Application of professional 3D scanners in metrology
  • reverse engineering
  • Quality control
  • Laser Laser 3D scanner Freescan UE
  • High-precision 3D scanner Autoscan
  • OptimScan 3D 3D? AutoScan-DS-MIX Scanner
  • EinScan Series 3D Scanners

    For Beginners, Designers or Education

    th

    The application of scanning relatively small objects requires precision and advanced settings in the snapshot processing program. The first thing users are guided by is the scanning area. With the help of two models - EinScan-SP and EinScan-SE - it will be possible to scan an object from 30 × 30 mm. Very important for the buyer and their price, as well as mobility and ease of movement.

    EinScan-SP and EinScan-SE are useful for beginners, designers and educational users. Desktop scanners SE and SP are the easiest to learn.

    Key benefits:

    • Easy scanner setup with Plug and Play technology;
    • Russian software interface;
    • the ability to scan objects of different sizes - from small to large;
    • texture tracking.
    Photo of 3D Scanner EinScan-SP
    • one scan time - 4-8 seconds;
    • Russified software;
    • automatic and fixed operation;
    • Align scanned data with marks.
    3D scanner photo EinScan-SE
    • 8 seconds per scan;
    • time required for 360 degree scanning in Auto Scan mode - 2 minutes;
    • Russified software;
    • automatic alignment of multiple scans;
    • API access service for 3D printers of any brand.

    Scanners for objects of different sizes

    Due to their large dimensions, some parts need to be scanned from a distance of several meters - in this case, portable devices are used. In this category, models with the “H” index successfully demonstrated their capabilities: EinScan H , EinScan HX from the line of mobile hybrid devices. If you choose by price, the most affordable is the portable EinScan H.

    Two of these models stand out from the list of products that SHINING3D produces by the presence of hybrid light sources:

    • EinScan H - an invisible infrared emitter spectrum has been added to the LED backlight;
    • EinScan HX - white LED light combined with a blue laser.

    This high-tech solution makes it possible to use these two professional scanners. Manual mode allows you to scan objects of different sizes - medium and large.

    To improve the accuracy of the photographs, glossy surfaces are treated with a matting spray. But with the help of some devices, the digitization of such objects is performed without preliminary application of auxiliary compositions to their surface, which saves a little time.

    Photo of a 3d scanner EinScan HX
    • Structured radiation from an LED source and a scanner laser projecting crossed laser beams onto the surface.
    • In Laser Scan mode, object scan accuracy is 0.04 mm.
    • Minimum distance to point is 0.05 mm in laser mode.
    • High efficiency in fast scan mode - 1,200,000 points/s.
    • Full color reproduction of the part.

    Copying accuracy is so great that when scanning objects of works of art, it is possible to obtain an almost perfect replica. For medical institutions, this is also a worthy find. Separately, it should be noted the presence of a built-in color camera.

    There is a free download of PC software with many functions for setting up and calibrating the equipment. The installation package is also supplied on a USB stick if you need a stand-alone installation in the absence of Internet access. Even an operator without experience and knowledge can work with the intuitive interface of the program, which saves time on staff training.

    3D scanning of people and their faces

    If living objects are selected for work, a special scanning technology is required. You can get a digital copy of a fragment of a human body, face and hair using EinScan H hybrid models - thanks to two light sources and a color camera, they produce an ideal 3D model with texture preservation. A special requirement for the model: it must not move.

    • Two scanning technologies - LED and infrared light, invisible to the human eye, combined in one device.
    • Scanning people (portrait, full-length) and other living objects.
    • High accuracy of scanned data up to 0.05 mm and volumetric accuracy of 0.1 mm/m.
    • Resolution up to 0.25 mm.
    • Fast scanning and large scanning FOV 420 × 440 mm.

    According to experts who have been conducting research in the world of additive technologies for many years, specific criteria are set for certain tasks: the more complex the part geometry, the higher the scanner resolution should be. But it will also take more time to digitize, and the file size will increase due to the multiplication of the number of cloud points with a smaller distance between them.

    Of the three samples, the HX version is the universal laser scanner model, and the Einscan Pro HD/Einscan Pro 2x 2020 are multifunctional scanners that have the ability to perform tasks in various industries.

    The EinScan Pro HD is an upgrade from the older model of the Einscan Pro 2x series, thanks to its ergonomic and high quality design. Models in this range can be used with a special tripod.

    This professional 3D scanner provides high precision scanning of objects in both operating modes: up to 0.045+0.3 mm/m.p. in manual mode and up to 0.04 mm. in fixed scan mode.

    Manual object scanning has two submodes: Rapid and HD, the latter providing a higher level of detail (resolution). Depending on the complexity of the geometry of the object, the presence of deep holes and 3D scanner parameters, such as resolution (distance between points), the final image may require further processing in the program.

    The maximum possible scanning speed for this scanner is 3 million points per second. Even if we ignore the specifications, we can see that this device is extremely fast in real-life scenarios. For example, a 220 x 71 cm low-relief sculpture takes less than one minute to digitize in color.

    Scanning of human bodies is also possible with this device, it provides decent quality. Last but not least, using a 3D color scanning camera with the device allows you to get scans with color and texture and realize even more projects. To keep the best price and reduce costs, manufacturers offer such cameras as an additional Color Pack option, which is paid only by those consumers who work with texture models and who really need it.

    EinScan HX is more expensive than the EinScan H scanner, and functional professional scanners, which include the EinScan Pro HD, are traditionally more expensive than other classmates and therefore are available to large manufacturers in the field of additive technologies.

    EinScan Pro 2X 2020 3D Scanner

    This portable and versatile handheld 3D scanner helps you get highly accurate results.

    The EinScan Pro 2X 2020 3D Scanner is an excellent option for scanning small, medium and large objects.

    3D scanner EinScan Pro 2X 2020

    The updated scanner model has improved the main characteristics, added new 3D scanning algorithms. Thus, Einscan Pro 2x 2020 has become a more affordable version of Einscan Pro HD, retaining the advantages and features of the old model.

    The main improvements of the new model:

    • A new principle of 3D scanning of the device in manual HD mode, which allows scanning without the use of markers (as Einscan Pro HD does). The old model could not scan without markers in this mode. The quality and detail of scans have also been improved.
    • Higher device scanning accuracy in manual HD mode, improved volumetric accuracy for scanning large objects.
    • Higher scanning speed in manual HD mode.
    • Increased 3D scan area.
    • Added alignment modes in manual HD mode: alignment by markers, by geometry, hybrid alignment. This expands scanning capabilities and efficiency in a wider range of tasks and areas.

    Einscan Pro 2x 2020 3D Scanner is compact and lightweight, you can take it with you anywhere. It has a comfortable handle and is light (namely 1.13 kg) and easy to hold in your hand, and if you need HD mode accuracy, put the scanner on a tripod. The scanner is connected via USB 3.0 to a computer or laptop.

    According to experts, the latest developments in the field of data capture and optimized algorithms make the 3D scanner Einscan Pro 2x 2020 a truly breakthrough - its scanning speed reaches 1,500,000 points per second (at 30 frames per second) in manual scanning mode.

    If you need to expand the functionality of the scanner, Shining 3D offers several optional options:

    • Color Pack 3D Scanner is an optional camera that allows you to scan with color and texture.
    • Industrial Pack - accessories such as turntable and tripod. Suitable for high quality scanning of small objects in the studio.

    Transcan C 3D Scanner

    The Transcan C 3D Scanner is a professional grade scanning 3D scanner capable of capturing “superiorly” accurate high-resolution scans of small to medium objects thanks to two 12 megapixel color cameras with adjustable scan range and multi-level switching permits within a single project.

    The 3D scanner has a sliding design that allows you to easily switch the scanning range between 150 x 96 mm and 300 x 190 mm when working with objects of different sizes. The multi-resolution fusion algorithm makes it possible to mix high, medium and low resolutions in one project, which makes the scanner much more efficient, and its two cameras can capture a 24-bit color map to capture detailed 3D color data and provide better results.

    The

    Transcan C has a structured light scanning mode with an automatic turntable that, in combination with the scanning software's stitching algorithm, allows efficient 3D model acquisition without manual intervention.

    What other indicators you need to look at to choose what you need

    The technical characteristics of the devices determine their use in a particular area: in jewelry, high detail is required, in industry - accuracy, in art - the possibility of color digitization, in the field of education - ease of setup and others. Of course, the properties are considered in a complex: the most important parameter is considered as a basic one, the rest are considered as auxiliary, but at the same time mandatory.

    3D Scan Accuracy

    The degree to which the copy matches the original is perhaps the most important indicator. The technical characteristics of scanners indicate the maximum allowable deviation of the scan size from the real object. The indicator is measured in millimeters or microns (1 micron = 0.001 mm). The smaller the number, the more accurate the 3D scan will be. But the deviation in reality can be larger, since it is quite difficult to create ideal conditions for the device to work, the result is affected by:

    • characteristics of the object;
    • user qualification;
    • scanner settings.

    It is important to understand that accuracy and resolution are different characteristics of scanning equipment. Detail is the smallest distance between points, the limitation of which is due to the resolution of the cameras and the principle of the scanner.

    Ability to digitize in motion

    Triangulation 3D scanners will help to scan moving objects, which can lead to an increased cost of devices of this type. This technology is not usually found in handheld 3D scanners, but among the offerings of the company with a rich history of SHINING 3D is the 2020 model EinScan HX, which at that time implemented triangulation technology.

    The use of professional 3D scanners in metrology

    3D scanners cope with the processes of measuring sizes and shapes of models in a matter of minutes, unlike traditional coordinate measuring machines, in which coordinates are read by contact sensors. The non-contact mode of operation enables the device to scan and measure surfaces of complex shapes (internal corners and edges), recesses and other hard-to-reach places.

    After receiving all the necessary data during the processing of the object, they are transferred to the computer for processing. The program performs a comparison of indicators in order to identify deviations - a mismatch in shape and size, the presence of chips, cracks and other deformations caused by mechanical stress or corrosion processes.

    Innovatively adapted blue laser 3D scanning technology

    OptimScan-5M, 3M and AutoScan Inspec "scanner-inspector" are designed for metrology purposes for scanning a small object. All these devices, to some extent, belong to the same price niche, are multitasking, provide an opportunity to obtain high-quality digital 3D models for comparison with reference samples, demonstrating:

    • the highest scanning accuracy;
    • the ability to upload scans to processing programs;
    • compatible with CAD/CAM technologies;
    • work with objects of various sizes and shapes, including those with complex geometry;
    • texture tracking and color imaging.

    Professional, they are also industrial, 3D scanners help to perform a wide range of tasks:

    • reverse engineering;
    • ultra-precise 3D quality control;
    • implementation of intermediate stages of the technological chain of creating products using additive technology;
    • faster prototyping and other operations.

    On the Russian market, you can find interesting offers for the purchase of scanning devices for photogrammetry at a fairly reasonable price. However, you should pay attention to their characteristics, especially such as the resolution of cameras, the distance between points, and some others that are important for measuring instruments, since the accuracy of the results depends on them.

    3D scanning in mechanical engineering

    Integration of 3D scanning technologies into production processes provides undoubted preferences. Properties of modern industrial scanners:

    • high speed;
    • ultra-precise measurement and digital copy saving;
    • processing of objects regardless of the size and complexity of the form;
    • possibility of implementation in automated process control systems.

    With the help of 3D scanners and specialized software, numerous processes can be performed:

    • reverse engineering, or reverse engineering;
    • metrological control;
    • test measurements of geometric parameters for the purpose of quality control and detection of defects;
    • creation of archives of digital models.

    Reverse engineering

    Reverse engineering of complex shapes is one of the areas of industrial engineering. A physical sample is translated into a digital copy using a 3D scanner, which can be reproduced on CNC machines and turned into a finished product. To do this, the resulting polygonal model is converted into a popular CAD format. The digital copy is modified and modified to achieve the specified parameters. This allows you to move from traditional design to a new level, when it takes several times less working time to work. The finished object becomes the basis for serial production of products.

    With a large selection of laser and optical 3D scanners on the market, there are not so many budget devices in this segment that are used for prototyping and solving other engineering and everyday tasks related to 3D modeling.

    Quality control

    Metrological 3D scanners make it possible to obtain a point cloud of the test sample, on the basis of which an ultra-precise 3D model of the part is formed. It is compared with a digital copy of a reference sample or with an existing CAD model.

    Benefits of 3D quality control:

    • Absolutely accurate data for reference comparison;
    • measurement of millions of surface points;
    • high speed operation;
    • possibility of automatic operation.

    The obtained data can be used for reverse engineering.

    Scanners from the metrological category are recommended for quality control. It can be either stationary or portable.

    FreeScan UE Handheld 3D Laser Scanner

    Shining 3D FreeScan UE is the latest addition to the FreeScan line of high performance 3D scanners. The device uses the patented blue laser technology and features high accuracy and stable repeatability.

    Sunny Wong, product manager of Shining 3D, states: “Innovative adaptation of blue laser 3D scanning technology, high precision and stable repeatability, and easy and convenient operation of hardware and software, allow FreeScan UE to effectively and accurately upgrade digital workflows in engineering and inspection tasks, ensuring the quality of the final product.

    The metrology-grade FreeScan UE system delivers 0.02 mm accuracy and 0.02 mm + 0.04 mm/m volumetric accuracy. With a maximum scan area of ​​510 x 520mm, users get a field of view suitable for large-scale reverse engineering projects.

    AutoScan Inspec high-precision stationary 3D scanner

    AutoScan Inspec
    • The interface is immediately clear to the user.
    • The accuracy of the 3D model reaches the metrological level with an error of 10 µm (0.01 mm).
    • The device can be used for non-contact measurement and quality control.
    • The process is fully automated.

    Works with native software developed by SHINING 3D programmers for industrial applications. The PC communication program supports STL format output files. This simplifies further 3D printing of parts from various transparent photopolymers on a 3D laser printer and saves time on intermediate data processing.

    OptimScan-5M 3D Metrology Scanner

    OptimScan-5M

    Professional metrological 3D scanner OptimScan-5M shows the best consumer characteristics required just for 3D inspection:

    • accuracy - 0. 015 mm;
    • two 5-megapixel cameras;
    • high processing speed;
    • blue light scanning technology.

    AutoScan Inspec Desktop Scanner is a two-in-one scanner-inspector that works in automatic mode. The scanner performs 3D scanning with the highest precision and 3D inspection of objects. For working with complex parts and the smallest elements, this is one of the best devices:

    Solutions for dentistry

    In dental orthopedics, 3D scanners – intraoral and dental – have become indispensable assistants for orthopedists and dental laboratory specialists. The former are used for scanning, creating digital impressions and then manufacturing perfectly fitting prostheses, crowns, veneers and other dental restorations using a 3D model using CAD / CAM technology. The second digitizes plaster casts or abutments with tiny elements.

    Aoralscan 3

    Aoralscan 3 is a compact, powerful device with simple and user-friendly operation and updated algorithm:

    • Light weight, only 240 g. for a full arc.
    • 2 tip sizes, suitable for adults and children.
    • AI Scan - Speed ​​up the scanning process.
    • Powerful software, ortho modeling and oral health report.

    AutoScan-DS-MIX Dental 3D Scanner

    AutoScan-DS-MIX

    AutoScan-DS-MIX is an exceptional performance dental scanner with two 5 megapixel cameras and advanced blue light 3D scanning technology:

    • scanning speed of one jaw - 13 seconds;
    • high accuracy - 7 µm;
    • data export to virtual articulator;
    • the ability to work with non-separable objects;
    • own fully Russified Dental Scan software compatible with most CAD/CAM solutions.

    Among the 3D modeling and additive manufacturing products offered by SHINING 3D, at an affordable price, you can easily find the right equipment to solve the tasks in industry, medicine, education and everyday life.

    Comparative review of professional 3D scanners Shining Transcan C and RangeVision Spectrum.

    Who is better?

    3Dtool

    Loading

    07/28/2022

    986

    Reviews

    3DTool is with you!

    Quite often we receive comments asking for the selection of 3D Scanner for solving reverse engineering problems in the daily work of 3D printing studios and small repair shops. And indeed, among the abundance of offers from various brands, sort out "9What is the difference between a more expensive device and a cheaper one, or why do you need a stationary 3D scanner instead of a manual one, is quite difficult to figure out. In this video, we will try to compare the recently reviewed Shining Einscan Transcan C with the popular model from domestic developers - RangeVision Spectrum, along the way demonstrating the scanning process and the final result on various household items.0003

    Buy a professional 3D scanner Shining Einscan Transcan C or RangeVision Spectrum, other CNC or 3D equipment and consumables, ask your question, or make an offer, you can contact us:

    • By phone: 8(800)775-86-69
    • E-mail: Sales@3dtool. ru
    • Or on our website: https://3dtool.ru/

    We also post our materials in the Telegram channel, on Zen Yandex and in our VKontakte group

    Article comments

    More interesting articles

    zavetiq

    Loading

    01/16/2023

    1269

    5

    Subscribe to the author

    Subscribe

    Don't want

    Creality's Halot Ray printer came out relatively recently, but surprisingly the information on it ...

    Read more

    1

    Subscribe to the author

    Subscribe

    Don't want

    In this article, we summarize and get acquainted with the best 3D printers for dentistry.


    Learn more