3D printed mountain bike accessories

5 Original 3D Printed MTB Accessories

My role at Pinkbike/Outside is mostly spreadsheets, meetings, cat-herding Levy, and the occasional salty comment. But every winter I try to learn something, and in 2021 I got a MatterHackers Pulse XE and spent a bit of time learning about 3D printing. Additive manufacturing on an industrial scale has huge potential for brands like Atherton Bikes (check out our podcast with them for more additive nerding), but I’ve been even more interested in the accessories and gadget-level stuff. It’s just neat.

Through my very slow learning process I’ve made spacers, pedals, pump mounts, cable guides, bottle cages, and more. I’m constantly blown away at how easy it is for someone with zero engineering experience to think of something, model it on a computer, press a button, and then it just… exists?

I thought it’d be interesting to highlight a few things I’ve been messing around with, and hopefully encourage you to get out and make your own stuff. I've included STL files for a few of the designs below so anyone with a 3D printer can pull down the file and try printing them. Let me know below what you think I could improve with these designs, or what you think needs to get made!

Presta Valve to Schrader Rim Adapter

I’ve been off the mountain bike with some injuries for a while now, so I’ve gotten a bit weird with a cargo-bike build that’s based on an Omnium Minimax. I ordered carbon rims from Light Bicycle drilled for Schrader, but forgot to order Schrader tubeless valves. I’ll eventually put some Stan's Schrader tubeless valves on, (to be honest, I might secretly be pro-Schrader valve now that wide rims are more common) but in the meantime I wanted to run these excellent 76 Projects Hi Flow tubeless valves.

The top of these valves is big enough to seal against the Schrader-sized 8mm hole in the rim, but on the spoke side there was nothing to keep the ~6mm valve centred. There’s no sealing required at the spoke side since it’s all done at the rim tape, so basically an adapter just has to centre the valve by taking up the space between valve and rim.

This was everything that home 3D printing is good for. 5 minutes with callipers and a tiny bit of basic 3D modelling, and I had an adapter printing. The only real challenge was matching the curve of the rim. I got lucky, the first one was almost right, then I chamfered a couple of edges, adjusted the radius to make it sit a little more flush, and the second try was good to go.

It cost about $0.06 to print, and saved me $30+ and a week’s wait. Even if Schrader makes sense on this bike, I’m very happy with this in the meantime.

Cobbled together in Fusion360.

STL download here. The design of the 76 Projects valve is a little thicker than others, so this should adapt most tubeless Presta valves to most Schrader rims. You do need to double check that your Presta valve is capable of sealing against the rim at the rim tape side, but if it doesn’t work you’re only out a couple of cents.

OneUp Pump Inline Mount

I started working on this OneUp pump mount for a frame builder who’s doing a very cool build for her entry to a handmade show later this year. We wanted a light, low profile pump holder that would sit in-line with the frame. I don’t know why, but mounts that stick out off the side of my bike bother me for no good reason. A long time ago I did a design that was similar to the excellent Jank Components one, but wanted something a little more minimal and with two sides further apart for more stability.

Initially, I struggled to make my design actually hold the pump firmly. If I made it too tight or wrap too far around, it was hard to get into and the pump still spun in the holder—while if I made it looser or with less wrap, it popped out too easily. I’m sure the engineers here are rolling their eyes at this, but the breakthrough for me was understanding that “everything is a spring.” Once I made the holder elliptical rather than round, it held the pump firmly and wasn’t too hard to get into. Now it’s solid enough that I think I will run it without any retention on my gravel and XC bikes, but I gave it an option to run a bombproof Voilé Nano strap as well.

I'm sure there was an easier way to model this design.

The wings have 45° angles so it could easily be printed on a standard FDM (fused deposition modeling) printer. I could have dropped the whole thing lower to the frame, but that would require ultra-low, hard-to-find bolts. I decided to stick with a sensibly low 3.5mm bolt-height, and am happy with that. I think it looks decent and it’s fairly low profile.

This setup apparently mounts nicely to the back of the King Cage Side Loader. I have to check fitment because I'm not sure it'll clear on larger downtubes, but for bikes with limited space in the front triangle this could be a great way to keep the cage and pump tighter to the frame.

Details:
• 12g (a lot lighter than stock)
• Printed with NylonX filament on a MatterHackers Pulse XE FDM printer
• Fits OneUp pumps
• 64mm mount point eyelet spacing
• Integrates compactly with King Cage Side Loader
• Optional Voilé Nano strap retention

Really happy with how this one prints.

No STL download. This design isn’t quite finished and I might eventually try to sell a few of them. Here's the STL for the old original pump mount I made that works nicely on tubes with rounder profiles. Or if you want to buy an inline OneUp mount right now, check out the one from Jank Components.

Master of Fun Drink Holder

I’m guessing most of us have stuffed a beer into a bottle cage and had it flop out at some point. There are good can-specific cages out there, but I wanted something that could fit everything from Red Bull cans to wobbly pops.

Overall this was a simple design. Again I used an ellipse to give it some clamping force around each can/bottle size, but I made the drinks drop in from the top so that they couldn’t wiggle out the front.

Section view

The hardest part was dialling in the design for printing efficiently. I generally use an unnecessarily low 0. 1mm layer height so it builds up from the build plate (Z-axis) very slowly, but the finish looks nice and smooth. In the XY axes the nozzle I use is 0.4mm wide, which, after a bunch of frustration on my part, turns out prints 0.45mm lines of filament. You can adjust this in your slicing programs, but I don’t think any slicers adjust it dynamically during your prints. What that means is my wall thickness needed to use multiples of 0.45mm to make it print cleanly rather than struggling to fill gaps. I settled on 2.25mm walls, so 5x passes of the nozzle printing a little 0.45mm snausage of plastic.

The design really only works holding your cans vertically, so it’s mostly for putting on your town bike’s bars. Even with extra clamp force I think bottles would shake out if you just ran it on your downtube, but I figured it was still worth sharing. Or maybe you have an idea to make it work on a mountain bike too?

STL download here. I’d call this a work in progress still, so let me know how it works if you print one. There’s enough height for each of the sizes to hold a full bottle fairly well, but I would love for it to be even more secure. I am also not sure if this is one worth printing commercially—it costs ~$6 to print with good filament on my MatterHackers FDM system at home, but because it takes up so much build volume, doing it on a local HP system would probably cost closer to $30. Too much to sell at a reasonable price if you want a healthy margin. Maybe this would be a good candidate for injection moulding—something to learn for next winter?

To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video

Views: 3,877 Faves: 0 Comments: 0

AirTag Tube Strap Bracket

A simple tube strap bracket was one of the first things I made when I got a 3D printer, because Kaz was lamenting that there weren’t many good options at the time. I’m also a huge fan of Project 4AGZE's 3D printed AirTag holder, and have them on most of my bikes. It’s not a foolproof bike tracking system, but for a smash and grab it’s a nice bit of extra security. It’s also helpful when the airline loses your bike for weeks on end.

I wanted something that didn’t look like an AirTag holder, and I wanted to keep a tube strap bracket on my bikes that only had one spare set of bottle mounts. So I smushed the two concepts together and landed on a two-piece design with a channel for a Voilé Nano strap to hold your tube. I designed it to look as invisible and understated as possible, and if you use security Torx bolts on it, I think it’s a reasonable way to slow down a would-be thief.

Ended up being fairly low key on the bike.

I had Tempus3D make a few with their multi-jet fusion HP machine. Love this finish.

Most of the design was fairly simple. I used a little labyrinth “seal” to resist water and I gave it a tiny draft angle to make the two sides fit together snugly. I experimented with some bigger, more symmetrical designs, but decided on keeping it as small as possible. It does work with standard 29” tubes, but works best with Schwalbe Aerothan or other ultralight tubes.

Added small cutouts to save weight and for smuggling emergency things, because apparently that's my niche now.

The toughest part for me was nailing the fit of the AirTag into the top half of the mount. I wanted it to snap into place solidly and had a design that consistently did that on my own MatterHackers setup, but I ended up liking the design enough that I sent it off to Tempus3D in Trail BC to get printed on their industrial HP setup. On that industrial printer I found there were tiny tolerance variations that made the fit inconsistent. Nobody thinks much about manufacturing variations when buying bike stuff, but we should. It’s been a big lesson for me that design manufacturability is as important as whether or not the unit we happen to be testing is perfect.

It wasn’t the HP printer’s fault that I couldn’t get a good fit, it was that my pretendgineered design required unrealistic tolerances. I put this problem out on Instagram, and got a flood of actual engineers generously sharing ideas with me. Again the solution was that “everything is a spring.” I tightened it up, gave it a reverse draft angle (there’s probably a better word?), and used fewer contact points. Now it’s perfect every time.

Details:
• 34g (with 9” Voilé Nano strap and AirTag, or 23g without AirTag)
• Bracket + AirTag + Aerothan tube is ~130g, which is ~110g lighter than a traditional bracket + AirTag + regular 29er tube. It’s safer and cheaper to save weight on accessories and mounts than tires and rims.
• Fits an Apple AirTag to keep track of your bike
• Works best with Aerothan and Tubolito style ultralight tubes

No STL download. I kind of want to do a small run of these too, but I haven't figured that out yet. They’re not cheap to have printed commercially and I’d probably need to sell them for ~$45 with the Voilé strap, which feels a bit high. On the other hand, that’s about the same as buying a separate AirTag holder and tube strap bracket.

For a more modular solution you could try Project 4AGZE’s 3D printed AirTag holder and see if it works under a traditional tube strap bracket. I really like 76 Projects's Micro Piggy, it’s a lot more low profile than most. And if you like, you can download my original tube strap bracket STL here.

Climb Switch High Performance System

This was originally a gift for Mike Levy that I spent way, way too much time on, and then enough people bugged me about getting one that I did a small production run of them. It stows a Mini BIC, one hitter, and material inside your steerer tube or pump via OneUp’s EDC standard. Of course I strongly condemn any impaired riding. This is for transport of legal things only, and if anyone asks, it’s officially a fire safety kit.

The hardest part about the design was finding a way to stuff a 22.2mm OD Mini BIC into a steerer tube. Even with the threaded OneUp system, there’s almost no space. Once I figured out how to package the lighter next to the one hitter and to have it pop out the back, I had to find a way for the lighter to snap into place. I used the sparkwheel at the top as a pivot and spring to add tension. It’s not 100% intuitive, but after the first time you do it it’s easy and satisfying. The screw-on compartment for material at the bottom was also super easy, especially once Cedric from Lal Bikes made some suggestions about chamfering the start of the threads.

I think these turned out pretty well.

Low key.

It took an embarrassing amount of trial and error to dial in the design, but once I nailed it I had Tempus3D do a small run of them with MJF and they turned out great. Since I was already doing the carriers in BC, I figured I should do the one hitters here too. Brian from Autmog makes very fancy pens on his lathe here in Vancouver. Their claim to fame is no post-processing or polishing, their stuff just comes fresh off his machines. I’m not much of a weedologist (weedographer?), so I actually had to get some user testing done before Autmog did a small run, but apparently they’re very good.

Also fits into a OneUp pump.

link="https://www.w3.org/1999/xlink">
View this post on Instagram

A post shared by Brian Park (@brianpark4)

Production costs for the carrier, one hitter, O-rings, and shipping box ended up being slightly under $30 each to my door. I put them up for $69 USD + shipping on April 20th, and sold all 40 of them in a day and a half. Wild. Netting out ~$1500 profit was cool, but I definitely spent several hundred hours on this dumb thing because I don't know what I'm doing, so I made about half the Canadian minimum wage on it. Not about to quit my day job!

I'm sure I could get costs down significantly if I went overseas, especially if I did huge volume production, but that kind of kills the point of all this iterative, small-run stuff for me. I’m not sure I’ll ever do another run, but if I do I’ll probably do it the same way as this first one.

Details:
• System weight is ~35g (including carrier, one hitter, and Mini BIC)
• Fits a standard Mini BIC lighter, custom one hitter, and material
• Nylon carrier is 3D printed using HP's multi-jet fusion tech
• 6061 one hitter is machined with no coatings or chemicals, and has fine holes
• Uses the OneUp EDC threaded top cap system only. *no affiliation with OneUp Components, but I did bring them some
• Inconspicuous and durable

I originally held a couple Climb Switches back in case I needed to replace any, but nobody’s had any issues so I may as well sell them. If you want to buy one I put the rest up on Etsy, just to try the platform. [UPDATE: they're all gone. If you want to get on a list of people to message if I ever make more, send me a DM on Pinkbike or Instagram with your email address.] For the record, Etsy sucks. They end up taking almost $15 for each sale, and I don’t think the platform brought me a single direct sale. I’ll probably sell through the ones I put on Etsy, and then if I ever do another run I’ll find a different system. Suggestions?

No STL download in case I ever make more. I should also mention there’s a cool Iozzo steerer tube one hitter thing worth checking out. It doesn’t need a OneUp threaded steerer and it’s a slick project.

To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video

Views: 2,836 Faves: 3 Comments: 2

To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video

Views: 2,781 Faves: 1 Comments: 2

I did this Ribbon Cage Nalgene side loader as a way to hold a boatload of water in a small front triangle. It was fun to learn about surface modelling but I'm not totally happy with it yet. It needs to be a little more rigid, and it'd be nice to bring the cost down. It's super annoying to print with so many supports on my home machine, and crazy expensive to print with MJF. Anyone have any suggestions?

Downloads for some other things I've made:
• Original Nano tube strap bracket
• Raaw Madonna cable guide
• Tern GSD Strider bike rack

Final thoughts

One thing I’ve noticed is that engineers and makers are all incredibly generous with their time and ideas. Every time I post something up on my Instagram, people like Cedric from Lal Bikes, Brian from Autmog, Emory from Farside Components, the 5Dev crew, David from Matterhackers, North Shore Billet, Ben from OneUp, Em from WZRD, Ivan from Bjorn, OutsideBrendan, Trickstuff, and lots more have hit me up with ideas, suggestions, and encouragement. This whole community of people who make things is really welcoming and supportive of each other. That’s so damn cool.

Now you tell me, what should I make next? What would you improve on the next iterations of these designs? Should I do another of these stories sometime or are you altogether over my dorking out on additive manufacturing?

🚲 Best STL files 3D printed for Bike・Cults

🚲 Best STL files 3D printed for Bike

Download free Bike Accessories 3D files

Find out a selection of valve cap, mounts, holders and racks for your bike to make with a 3D printer. There are so many accessories for bikes and they can be really expensive, 3D printing is a great way to reduce the cost! 3D printing is also a great solution to invent ideas to make daily live on your bike easier.

Customizable Bike Mount for Modular Mounting System

Free

3D Printed Bike

Free

Wall Rack

Free

mountain bike wall mount

Free

GoPro bike mount

Free

Bicycle Water Bottle Cage

Free

Stand Phone For Bike

Free

Water Bottle Holder

Free

Pizza Valve Cap

Free

Stormtrooper Valve Cap

Free

Coffee Cup Holder

Free

Brompton logo tap

Free

Presta valve cap with thread _ Presta Cap valve with thread

Free

Smartphone Support Magnetic Bike

€0. 50

GoPro Handlebar Mount (customizable)

Free

bike flashlight mount

Free

MOUSQUETON

Free

SR Suntour fork top cap socket (FAA122 replacement)

Free

Handelbar mount for Samsung S5 with wireless Qi charging - weather proof

Free

bike support go pro diameter 32 mm

Free

Bike Light

Free

Triathlon extension

Free

Smartphone bike holder

Free

Bar-End bike Plugs

Free

Saddle mount for "Smart LED / Planet Bike" lights

Free

Bike FlashLight Quick Release Mount

Free

iPhone 6 Holder

Free

Draisienne bike (IKEA hack collection) by Andreas Bhend and Samuel N.

Bernier

Free

The Bicycle Bubble Machine

Free

iPhone XS/6s Holder for GARMIN Mount (eTrex/Oregon/Colorado Series)

Free

bike holder

Free

Pinces pantalon pour le velo - Cycling Trouser Clips

Free

Mud Bike

Free

TUTUGO | Coffee Cup Valve Caps

Free

Fizik ICS Integrated Clip System Saddle adapter for Planet Bike / SMART Led Lights

Free

Clamping Knob For M8 Nut

Free

Bead buddy for bicycle tire installation

Free

Deer Bike Rack

Free

iPhone 6 Plus Holder

Free

Bicycle Stand - 2 Part for use on the Road

Free

bike cleaning wheel

Free

Lightweight press-fit MTB handlebar plugs

Free

Graziella Back Light Mount

Free

Yet Another Bicycle Flashlight Holder

Free

Beach umbrella holder for your bike

Free

Bike Attachment for iPhone 5, 4 and 4S

Free

ISCG bash guard

Free

derSchraederFlatter - Tire deflator for Schraeder valves

Free

Here is our selection of the best STL files for Bike, all these accessories are from the 3D file library Cults and are perfectly 3D printable.

This collection includes free 3D files of Bike accessories. The numerous 3D models will adapt perfectly to all types of bike: Mountain bike, city bike or racing bike. No restriction on the type of bike so you can even modify the size or shape of the 3D files to fit the shape of your bike or its frame.

The 3D designers who propose their creations on the 3D file download platform Cults have therefore competed in ingenuity to facilitate your daily life on a bike. For example you can easily hook your phone to the handlebars, carry your water bottles or attach a GoPro on your bike. Once you get home, there are printable 3D solutions that will allow you to store your bike. You can even stand out by 3D printing customizations for your bike such as valve caps 3D printed in the shape of a pizza or a Lego man's head!

🚲 Best Bicycle 3D Printable STL Files・Cults

🚲 Best Bicycle 3D Printable STL Files

Free Download Bicycle Accessories 3D Files

A selection of valve covers, mounts, holders and racks for your bike that you can make with 3D printer. There are so many bike accessories out there and they can be very expensive, 3D printing is a great way to cut costs! 3D printing is also a great solution for inventing ideas that will make everyday life on your bike easier. nine0007

Customizable Bike Mount for Modular Mounting System

Free

3D Printed Bike

Free

Wall Rack

Free

mountain bike wall mount

Free

GoPro bike mount

Free

Bicycle Water Bottle Cage

Free

Stand Phone For Bike

Free

Water Bottle Holder

Free

Pizza Valve Cap

Free

Stormtrooper Valve Cap

Free

Coffee Cup Holder

Free

Brompton logo tap

Free

Presta valve cap with thread _ Presta Cap valve with thread

Free

Smartphone Support Magnetic Bike

0,50 €

nine0008 GoPro Handlebar Mount (customizable)

Free

bike flashlight mount

Free

MOUSQUETON

Free

SR Suntour fork top cap socket (FAA122 replacement)

Free

Handelbar mount for Samsung S5 with wireless Qi charging - weather proof

Free

bike support go pro diameter 32 mm

Free

Bike Light

Free

Triathlon extension

Free

Smartphone bike holder

Free

Bar-End bike Plugs

Free

Saddle mount for "Smart LED / Planet Bike" lights

Free

Bike FlashLight Quick Release Mount

Free

iPhone 6 Holder

Free

Draisienne bike (IKEA hack collection) by Andreas Bhend and Samuel N.

Bernier

Free

The Bicycle Bubble Machine

Free

iPhone XS/6s Holder for GARMIN Mount (eTrex/Oregon/Colorado Series)

Free

bike holder

Free

Pinces pantalon pour le velo - Cycling Trouser Clips

Free

nine0008 Mud Bike

Free

TUTUGO | Coffee Cup Valve Caps

Free

Fizik ICS Integrated Clip System Saddle adapter for Planet Bike / SMART Led Lights

Free

Clamping Knob For M8 Nut

Free

Bead buddy for bicycle tire installation

Free

Deer Bike Rack

Free

iPhone 6 Plus Holder

Free

Bicycle Stand - 2 Part for use on the Road

Free

bike cleaning wheel

Free

Lightweight press-fit MTB handlebar plugs

Free

Graziella Back Light Mount

Free

Yet Another Bicycle Flashlight Holder

Free

Beach umbrella holder for your bike

Free

Bike Attachment for iPhone 5, 4 and 4S

Free

nine0008 ISCG bash guard

Free

derSchraederFlatter - Tire deflator for Schraeder valves

Free

Here is our selection of best stl files for bike, all these accessories are taken from 3D Cults library files and 3D printed beautifully .

This collection includes free 3D files of bicycle accessories. Numerous 3D models of are perfect for all types of bikes: mountain, city or racing bike . There are no restrictions on the type of bike, so you can even resize or reshape the 3D files to match the shape of your bike or frame.

In this way, 3D designers offering their creations on the Cults 3D file upload platform compete in ingenuity to make your everyday life on a bike easier . For example, you can easily attach your phone to the handlebar, carry water bottles, or attach your GoPro to the bike. Once you get home, there are 3D printable solutions that will allow you to store your bike. You can even stand out by 3D printing custom decorations for your bike, like 3D printed valve caps in the shape of a pizza or a Lego man head!

26 3D printed smart gadgets for urban cyclists

Urban cycling is gradually gaining popularity. Two-wheeled monsters have taken over the streets, which is great for the health of the planet and the bank account. However, every cyclist has his own style, habits and needs, which bikes do not always meet. Fortunately, the days when everyone had one approach are long gone. And 3D printing technology played an important role in this.

We've rounded up 26 of the most useful and practical things for cyclists, and even added photos to show them off! These 3D printed smart gadgets will make your travels (and life in general) much easier and more enjoyable...

1. Carry handle.

No more awkward ladder climbing.

Designer Pookas

2. Bag hook and water bottle holder.

Stop riding a bike with one hand, it's life threatening!

Designer Renaud DeFrancesco

3. Bottle holder.

It seems to be made of metal, but this is only an appearance. It's actually nylon. And it should be noted that this holder perfectly fixes a water bottle. nine0007

Designer greenengineer

4. Needle beads.

How can you consider yourself a stylish cyclist if there are no beads on the spokes of your bicycle?

Designer Jonathan Monaghan

5. Stainless steel jewelry.

Only with these little things will you be able to rightly call your bike "My Prelest".

Designer vorwaertz

6. Steering wheel with mirrors.

Don't sacrifice safety for beauty. Better choose both! nine0007

Designed by Annabel Nichols from New Zealand

7. Bicycle bow tie.

Honestly, it looks very attractive.

Designer Tristan Hummel

8. Bicycle headlight.

Simple and practical accessory that will make you stand out from the crowd.

Designer kdw

9. Bottle wing.

Another great way to stand out. And another way to use a water bottle. nine0007

Designer Pookas

10. Bicycle watch.

No more cycling with one hand or frantically searching for your watch in your pocket. And it's great!

Designer Phil Viloubay

11. Flower pot.

Stylish ladies on iron horses will love this accessory. Take flowers with you on the road…

Wearableplanter designer

12. Clutch control mechanism.

For improved control.

Designer Rich Olson

13. Valve caps.

If the choice always gives you pain, then you are in big trouble. Designers have prepared hundreds of original models for you!

Designer prathos

Designer Pookas

14. Bottle holder.

Everyone knows how inconvenient it is to get a bottle out of a backpack while driving…

Designer smaddox3

15. Bicycle rack.

You remember Clug, the great and handy bike rack?

16. Bicycle license plate.

Make your bike stand out. Just because you can.

Designer yourhandsmyface

17. Chain stop.

Why get your hands dirty?

Designer scottamayson

18. Wallet.

You must have had situations in your life when you stood in line for coffee dozens of kilometers from home and suddenly realized that you forgot your keys and bank card at home. It was scary, right?

Designer marius_p

19. Travel bottle opener.

No one will start the party without you. Checked!

Designer chromoly

20. Unique tire tread pattern.

If you're worried you won't find your way home, or planning on having another drink. nine0007

Designer Nalio

21. A wide variety of mounts and holders.

Do you want to decorate your bike with gadgets? Here you will find mounts for all occasions.

Designer Bruininkp

Designer James Rowlands

Designer David Hotard

Designer GIOPANTONI