Home » Misc » Peopoly phenom 3d printer

Peopoly phenom 3d printer


Phenom Prime by Peopoly

Roll over image to zoom in Click on image to zoom

Save $1,300.00

Peopoly

Country: US

Product: Prime

Kit: None

None

Panel & 2x FEP & 2KG Deft White

Curing Box Pro

4KG Deft White

4KG Deft Grey

Variant

US / Prime / None - $1,499.00US / Prime / Panel & 2x FEP & 2KG Deft White - $1,737.00US / Prime / Curing Box Pro - $1,705.00US / Prime / 4KG Deft White - $1,540.00US / Prime / 4KG Deft Grey - $1,540.00

Share this product

Free shipping for a single Prime until Nove 30(only for the US )

Prime review at 3D Printed Props

Faster, Sharper, Rock Solid MSLA Printing

*Available in stock for immediate shipping!

Introducing Phenom Prime, it boasts an all-new 5448 × 3064 resolution (5. 5K HD) panel with a best-in-class 51 um pixel pitch. The monochrome panel has a significantly higher light transmission rate that leads to an over 70% reduction in exposure time. When used in conjunction with Peopoly Deft resin and Peopoly FEP film, users can expect a 100% increase in speed over the current Phenom. Prime also has 3 times longer LCD panel expected lifespan than Phenom and sports the newly designed cooling system to handle the heat from printing. With a build volume of 276 × 155 x 400 mm, Phenom Prime is 400% bigger than Form3 and 500% faster when printing at full capacity. Read more coverage on All3DP

MSLA is much faster than other resin technology when printing a large object or a full plate of small objects because the entire layer is cured of resin. Peopoly’s customized light engine has even more light distribution than other printers using MSLA technology and a cooling system to improve print results while extending the life of the mask.

Phenom Prime is also powered by the latest Chitu System controller board that can output up to 8K with faster processors. The upcoming CHITUBOX Pro software will have many advanced features and is the best slicer choice for Phenom Prime and Chitu Systems board.

Details

- Printer Size: 452x364x780 mm
- Print volume: 277 × 156x 400 mm
- Resolution: 51 um
- Technology: MSLA 3D Printing
- Vat Volume: 2.5 kg
- Additional FEP film x1
- Panel Lifespan: 1200 on average using recommended resin and settings

Additional Consumables

Phenom Forge by Peopoly

Roll over image to zoom in Click on image to zoom

Save $500.00

Peopoly

Country: US

US

CA

EU

UK

Other

Product: Forge

Kit: None

None

Panel and 2x FEP

Curing Box Pro

4x Deft White

4x Deft Grey

4x Nylon-Like

Variant

US / Forge / None - $999. 00US / Forge / Panel and 2x FEP - $1,255.00US / Forge / Curing Box Pro - $1,239.00US / Forge / 4x Deft White - $1,065.00US / Forge / 4x Deft Grey - $1,065.00US / Forge / 4x Nylon-Like - $1,088.00CA / Forge / None - $999.00EU / Forge / None - $1,499.00EU / Forge / Curing Box Pro - $1,540.00UK / Forge / None - $1,699.00UK / Forge / Curing Box Pro - $1,784.00Other / Forge / None - $1,699.00Other / Forge / Panel and 2x FEP - $1,893.00Other / Forge / Curing Box Pro - $1,930.00Other / Forge / 4x Deft White - $1,749.00Other / Forge / 4x Deft Grey - $1,749.00Other / Forge / 4x Nylon-Like - $1,769.00

Share this product

Free shipping for a single Forge until Nove 30 (only for the US )

Order now for immediate shipping.

Introducing Forge, a production-grade large-format MSLA printer built for workshops and factories. It is the only large MSLA printer with heated Vat, the highest contrast monochrome screen, and the most accurate parallel light source. It is powered by the all-new Vlare Core controller with features that will make printing easier, faster, and more accurate. Read more coverage on All3DP

Key Features

- Build Volume 288 x 163 x 350mm
- High Contrast (500nit) 6K Monochrome Panel for even better resolution and excellent life span.
- Vlare Core controller board with Open File Format support and onboard EMMC storage
- Build-In masking function for more even light distribution
- Slicer options: Lychee Slicer, Tango Voxeldance, and Vlare Slicer
- WiFi and Infrared Camera for remote monitoring and management
- Temperature-Controlled Vat for more consistent printing
- Fleet management functions for print farm
- Advanced Parallel LED for higher resolution
- More power-efficient, less fan noise design with UL Certified power source.
- Highly customizable with add-ons like air duct vent, chamber heater, LED strip, and more.
- All new Nylon-Like Tough resin to work with Forge printer

Forge is shipped in two boxes and requires 30-60 minutes of assembling to connect the top and the bottom part of the printer. The assembling does not require any special tools or soldering.

For users who print for productions, speed and ease of use are often as important as resolution if not more so. The flat build plate allows for quick removal and cleaning, unlike a perforated plate. The heated vat ensures printing consistency and avoids reprint that costs time and money. Users can swap a new film or a new panel in under 20 minutes instead of an hour. And most components can be accessed by removing one panel for quick maintenance.

Details

- Printer Size: 470x 360x 640mm
- Print volume: 288 x 162 x 350mm
- Resolution: 50 um
- Technology: MSLA 3D Printing
- Vat Volume: 2. 5 kg
- Physical Weight: 30KG
- Shipping Weight: 43KG
- Additional FEP film x1
- Panel Lifespan: 1200 on average using recommended resin and settings

Additional Consumables

Peopoly Phenom 3D printer in Moscow

Out of stock

Add to compare

Item added to compare Go

Free shipping within Russia

135 000 ₽

200 200 ₽

-33%

Notify me of admission

Official distributor

We work directly with manufacturers.

Any form of payment

See the 3D printer in action in our demo room.

Own warranty service

Warranty and post-warranty service for equipment purchased from us.

Permanent 10% discount on consumables

When you buy a 3D printer from us,
, you get a 10% discount on all consumables.

New from Peopoly - The Phenom 3D printer was created with the aim of making large-format photopolymer printing available to a wider range of users. Phenom offers high-resolution, high-speed professional printing suitable for dental, SMB and SMB applications. A build area of ​​276 x 155 x 400 mm allows you to print products such as automotive parts, tools, props, home furnishings, electrical appliance cases, shoe insoles, jewelry and dental models, and even small-scale small-scale production.

Peopoly Phenom 3D printer uses MSLA (LCD + LED) technology. It is equipped with a 12.5-inch 4K LCD panel, a UV-LED panel below it, and a special optical lens to distribute light evenly over the work platform. This technology provides an optimal ratio of quality and print speed. Phenom print speed is 500% faster than Form3. The specially developed FEP film reduces the adhesion of the cured layers to the bottom of the bath, thereby preventing the model from peeling off the print platform.

Built-in cooling system and lens option block the infrared radiation of the lamps, significantly increased the life of the optical panels. And the modular design allows for future upgrades and upgrade many printer components.

  • Print platform
  • Photopolymer bath
  • Additional FEP film
  • Tools
  • USB stick
  • Funnels
  • Power cord
  • Spatula
  • Instructions in Russian in email. vide

Peopoly Phenom series photopolymer 3D printers can be named among the brightest novelties of this year. Peopoly made a small revolution by releasing high-precision MSLA (LCD + LED) printers with a really large printable area and affordable prices for such printers.

But first things first…

Read more

Scale of delivery

Delivery to all regions of Russia and countries of the Customs Union.

Free shipping

When you buy a 3D printer (except assembly kits) you get free shipping.

Cash

In our store you can pay for your order in cash.

Online payment on the website

You can pay for orders with a bank card on the website of our online store.

Peopoly Phenom L 3D printer in Moscow

Out of production

Add to compare

Item added to compare Go

Free shipping within Russia

Official distributor

We work directly with manufacturers.

Any form of payment

The opportunity to see the 3D printer in action in our demo room.

Own warranty service

Warranty and post-warranty service for equipment purchased from us.

Permanent 10% discount on consumables

When you buy a 3D printer from us,
, you get a 10% discount on all consumables.

The largest model from Peopoly - 3D printer Phenom L has a huge construction area (345.6x194.4x400 mm) and opens up new possibilities for photopolymer 3D printing.

Like other models in the Phenom series, the L model prints using MSLA (LCD + LED) technology. At the same time, the optical lens developed by the company provides the most uniform distribution of light and, together with the cooling system, prevents the harmful effects of high temperatures on the LCD matrix, extending its service life. The system of high-speed fans also helps to balance the temperature, which guarantees stable print quality. A special FEP film reduces the sticking effect of the cured layers and prevents the model from sticking to the print bed.

The Peopoly Phenom L 3D Printer offers 4K resolution large format printing that can handle small-scale production, full-size prototypes, complex engineering, cosplay and film props, mock-ups, and more.