3D printed curtain holder

▷ curtain rod bracket 3d models 【 STLFinder 】

Curtain Rod Bracket

thingiverse

Butterfly curtain rod bracket

Curtain Rod Bracket

thingiverse

Curtain Rod Bracket 1/2

Curtain Rod Bracket

thingiverse

Two different sized curtain rod brackets that hold the curtain rod closer to to the wall than standard brackets.

Curtain rod bracket

thingiverse

We needed a custom made curtain rod bracket for a 15 mm rod. This is what we came up with. ...You can just "click" the rod in place.

Curtain Rod Bracket

thingiverse

Simple curtain rod bracket. For 27mm diameter rod. Designed with FreeCAD (source available). Simple support de tringle à rideau. ... Print Settings Printer: Smartrap XL300 ...

Curtain Rod Bracket

thingiverse

This is a curtain rod bracket I made (first design). ... Dimensions: radius of holder:14mm screw hole size: 4.5mm diameter length of arm: 100mm height: 90mm width:40mm

Curtain Rod Bracket

thingiverse

. .. and the window was plastic. ...I needed to mount it on the window itself. A plastic bracket could more easily be glued to the plastic window. So here it is, a plastic (PLA) curtain rod bracket, easily glued to the window with epoxy. ... 100% infill

Curtain Rod Bracket

myminifactory

This curtain rod bracket was printed, because cheap store bought brackets got broken. We like to hang clothes hangers with clothes on curtain rods. And as some clothes can be quite heavy (hoodies, jackets,...), cheap store bought plastic brackets...

Curtain Rod Bracket

thingiverse

Curtain Rod Bracket Marking Template

thingiverse

Use this for marking curtain rod brackets to keep your curtain rods the same height

25mm curtain rod bracket

thingiverse

Curtain bracket for 25mm curtain rod. Doesn't matter place it on wall or ceiling. 25mm 커튼 봉(행거)를 위한 브라켓입니다. ... 벽, 천장 무관하게 설치 가능합니다.

Curtain Rod Bracket (Double)

grabcad

Double Rod Bracket for Window Curtain,Rod diameter is 1 inch. Material can be used as Steel, Aluminum, Iron or any other alloy..

Window Curtain Rod Bracket

thingiverse

... 4, 2 for the top, 2 for the bottom if you want the curtain to stay in place on top and bottom. I used left over [Ikea curtain rods](https://www.ikea.com/us/en/p/raecka-curtain-rod-white-40217149/) and cut them down to size to fit my door. ...

Basic Curtain Rod Bracket

thingiverse

It's a telescoping curtain rod, so the rod is bigger diameter on one side, thus there are two different brackets. I designed it so the rod just snaps in to the bracket, no retention screw required. The diameter of the two holes is 12mm and 15.5mm. ...

Curtain rod bracket

thingiverse

This is a curtain bracket for 1-inch rods. Our rod is about 6-7 feet long. It has done a good job at supporting the curtain which is about 7 feet tall. This is the 3rd design to make it as strong as I could, while still conserving some aesthetic...

Curtain Rod Bracket

prusaprinters

This bracket will offset the curtain rod from the wall far enough to allow space for blinds on the same window. Screw holes are sized for use with #6 screws. ...Gcode provided has 2 brackets to print at once (because who needs just one!).  </p>

Shower Curtain Rod Bracket

thingiverse

We recently needed a bracket to hold a shower curtain rod up in our laundry room for drying cloths. I thought about buying one, however, quickly designing and printing this saved me a trip to the store and was much cheaper than buying one. ...Works...

Curtain rod bracket support

thingiverse

This was created to support my curtain rod my which was sagging in the middle from the flimsy metal bracket being weak. The screws into the wall were very secure so designing an entire bracket seemed a waste. I printed in white as blends in with our. ..

Double curtain rod bracket

thingiverse

I could only buy ugly metal curtain rod holders that would take two and they would also only take metal rods I made this to take 2 33mm wooden rods. ...I cut this one out on a CNC so did not put in screw holes into the design.

Cafe Curtain Rod Bracket

thingiverse

Aesthetically pleasing cafe rod bracket to replace the boring metal ones that come with the rod. 9/16 diameter cutout for 1/2" rod Should work with 1" number 4 wood screws. ... Instructions created...

Curtain Rod Bracket

prusaprinters

This is a wall mount I designed to hold ½ inch conduit pipe that I had bent into a custom curtain rod. It has holes on each side for M4x7 set screws to make sure the rod doesn't slip out.I printed it in PETG with 30% infill.

Curtain rod bracket

thingiverse

This braket hold two curtain rods (20mm). To secure the rods a hole to tap a M3 thread is foreseen. After taping the hole you can use M3x6 or longer bolts to secure the rods. To tap a hole on a 3D printed part is very easy, all you need is a...

Curtain rod bracket

cults3d

Curtain Rod Bracket

thingiverse

A simple curtain rod hanger with end caps. It's designed for a 1 1/4" dia dowel (32mm). I used wood screws long enough to bite about an inch into the window header. The rod should snap into place firmly. I printed these on low quality .4mm/layer...

Curtain Rod Bracket, +1

cults3d

This bracket set will allow you to use a 1/2" diameter PVC tube as a wall-mounted support rod. The zip file contains two end brackets and a center support, as well as decorative plugs to fill the screw holes. ... A few thoughts on the state of 3D...

Curtain Rod Bracket, +1

thingiverse

Curtain Rod Bracket, +1

myminifactory

Window curtain rod bracket long and short

thingiverse

Window curtain rod bracket for Standard 12mm-Rods

Cheap Ikea Curtain Rod Bracket

thingiverse

A replacement mounting bracket for a cheap curtain rod.

Curtain Rod Bracket-majig (16mm)

thingiverse

Modeled in Fusion360 I wanted to expand upon my previous design (thing:3837876) and make it a little more useful by attaching brackets, so you can now assemble curtain rods, towel racks, etc. using a 16mm dowel! I left the small hole in the center so...

3D printed curtain holder | Wejn.org

Written on 2020-12-13

3d_design 3d_printing fusion360

When all you have is a 3D printer – and some magnets – everything starts looking like it could benefit from yet another Fusion 360 design.

I’ve been sitting on this model for a few months (and it went through multiple iterations, too) because I did not have a good photo for it. I still don’t, but I got fed up with myself… so here we are.

This time I’m gonna lead with the end result:

And now let’s talk about the motivation. And why is the current iteration still deficient. So much that I will inevitably end up doing another one sometime in the future.

You see, our living room comes with a huge window that covers the entire side, has a great view¹, and leads to the terrace:

The squiggly line depicts the curtain track along the window, and the wedge depicts the door.

But the entire side of the window has only one track to hang the curtains:

It’s the built-in rails (tracks) that one uses with “GVS Gleiter”, a system that is ubiquitous in Switzerland.

So in order to accomodate both normal curtains for the day, and non-transparent ones (drapes?) for the evening², we had to improvize. So by dragging to one side you unroll the regular curtains, and to the other the evening ones.

But the 90° corner around the pipe gets packed with the folded-up curtain, and that prevents the window from “breathing” properly. So moisture condensates in the corners of the window even when we vent the place multiple times daily, as one should.

So, yeah, can’t have that.

Hmm… if only we could hold the curtain back from the window…

It started very simple, with first iteration:

[Right here should have been an interactive 3D model.]

Just enough to hold the curtains in place. And it sort of worked, except the curtain kept somewhat sliding out, plus the holder had to be stored somewhere. All of which is slightly impractical.

Fortunately the structural pipe in the middle (which is a hunk of iron from what I can tell) can be used as a natural place to affix an appropriate thingamajig.

And when the pipe’s made of iron… well, neodymium magnets for the rescue!

The second iteration, then, went like so:

[Right here should have been an interactive 3D model.]

Which works better, but the paint on the pipe was getting somewhat scratched (discolored) by the protruding magnets, and it wasn’t exactly rigid enough.

So I sank the magnets³, and ended up with another iteration:

[Right here should have been an interactive 3D model.]

Which holds better, and looks even weirder than the previous iteration. To my eyes… it’s actually a good flavor of weird.

But a future iteration will probably be in form of a collar around the pipe that would serve as a base, and then another part sliding on the collar. That way it doesn’t rely on magnets, and still can be hidden out of sight (behind the pipe) as needed. Plus, it wouldn’t hurt to have a way to also hold the evening curtains in place, to avoid the huge gap⁴ visible in the illustration photos above.

As always, the design as well as the STL files: {current, previous, initial} are freely available under CC – BY NC SA license⁵.

Not pictured here in the interest of privacy. So you might have to trust me that – other buildings aside – it’s rather grand. ↩
Because I don’t know about you, but I don’t enjoy living in a fishbowl. ↩
And switched to cubes instead of barrels to compensate for the loss of attractive force. ↩
We currently work around the gap by using a simple clothespin. ↩
The non-commercial bit because I don’t want to get into hot water with Autodesk since my license is the free hobbyist one. ↩

STL file Bunny curtain holder・3D printed model for download・Cults

FLEXI CALAMARDO ARTICULATED

1,50 €

Flexi Patricio Articulated

1,50 €

FLEXIBLE BATMAN

2 €

DRAGON HINGED BEAM

2 €

SPONGEBOB SPONGEBOB OCTOPUS HINGED

1,70 €

SPONGEBOB HINGED (KEY RING)

2 €

FLEXI DON HINGED CRAB

2 €

BATMAN MOVIE - KEY RING - KEY RING

2,50 €

Best 3D Printer Files in Home Category

Digital Thermometer Hygrometer BOMB stand

Free

Ripple Vase (Dual Extrusion / 2 Color)

0. 83 €

Nespresso capsule box

4 €

portable box for pistachios with two compartments and one for the shell

2.68 €

Tangled Pyramids Ornament

Free

St. Patrick's Day inspired Mug Flower Pot

1.14 €

Geometric dog pug

11.82 €

Lamp and vase

3 €

Bestsellers in the Home category

Key hanger with pokemon balls (Pikachu, Gengar)

2.02 €

Gengar Pokemon Planter Vase Pencil Holder

2.81 €

Super cute paw pen cup

1. 41 €

BOWL FOR YOUR FURRY FRIEND

1,30 €

Wall shelf "Tinder Fungus"

2.40 €

1/14 Excavator - Vulpa 505

65 €

Moving Eye, Skull Planter, Halloween Decoration, Skull Bowl, Printing in Place, Without Support

2.56 €

Wallet card holder (universal package)

1.39 €

PARROT BEAK HANGER

2.23 €

Bag stopper

1 €

Venus and Aphrodite

3.60 €

Wall shelf "Amanita mushroom"

2,40 €

Spider in a pumpkin

1. 58 €

Candlestick - Arbre de vie

1.20 €

Watering can

2.40 €

Clothes hanger "Wolf"

2,40 €

Do you want to support Cults?

Do you like Cults and want to help us continue our journey on our own ? Please note that we are a small team of 3 people , so support us in maintaining activities and making future designs of is very easy. Here are 4 solutions available to everyone:

AD: Disable your AdBlock banner blocker and click on our banner ads.
AFFILIATION: Shop online with our affiliate links here Amazon.
DONATIONS: If you want, you can donate via PayPal here.
* INVITE FRIENDS: * Invite your friends, discover the platform and great 3D files shared by the community!

Free STL file curtain rod holder・3D printing idea for download・Cults

Shaft 20t gt2 5mm

Free

40 mm to 60 mm adapter

Free

Toilet handle complete

Free

Connector 5 mm with 1/4-20

Free

40mm to 60mm adapter for rail cooling air duct system

Free

Mesh building board 80x80x3

Free

5 - 1/4-20 Connector 40 mm long

Free

Jason Nameplate

Free